Molybdenum-nickel-aluminum oxide catalyst

The reaction scheme is rather complex also in the case of the oxidation of o-xylene (41a, 87a), of the oxidative dehydrogenation of n-butenes over bismuth-molybdenum catalyst (87b), or of ethylbenzene on aluminum oxide catalysts (87c), in the hydrogenolysis of glucose (87d) over Ni-kieselguhr or of n-butane on a nickel on silica catalyst (87e), and in the hydrogenation of succinimide in isopropyl alcohol on Ni-Al2Oa catalyst (87f) or of acetophenone on Rh-Al203 catalyst (87g). Decomposition of n-and sec-butyl acetates on synthetic zeolites accompanied by the isomerization of the formed butenes has also been the subject of a kinetic study (87h). 

The predominant process for manufacture of aniline is the catalytic reduction of nitroben2ene [98-95-3] ixh. hydrogen. The reduction is carried out in the vapor phase (50—55) or Hquid phase (56—60). A fixed-bed reactor is commonly used for the vapor-phase process and the reactor is operated under pressure. A number of catalysts have been cited and include copper, copper on siHca, copper oxide, sulfides of nickel, molybdenum, tungsten, and palladium—vanadium on alumina or Htbium—aluminum spinels. Catalysts cited for the Hquid-phase processes include nickel, copper or cobalt supported on a suitable inert carrier, and palladium or platinum or their mixtures supported on carbon. 

Hydrotreating also produces some residuals in the form of spent catalyst fines, usually consisting of aluminum silicate and some metals (e.g., cobalt, molybdenum, nickel, tungsten). Spent hydrotreating catalyst is now listed as a hazardous waste (K171) (except for most support material). Hazardous constituents of this waste include benzene and arsenia (arsenic oxide, AS2O3). The support material for these catalysts is usually an inert ceramic (e.g., alumina, AI2O3). 

Recent patent disclosures by the Standard Oil Co. of Indiana indicate that their process for the polymerization of ethylene is also a relatively low-pressure process, and the following process information is based on these disclosures. The polymerization process is a fixed-bed process employing a prereduced catalyst, ethylene pressures of 809-1,000 psi, and temperatures somewhat greater than 200°C. The metal oxides (such as nickel, cobalt, and molybdenum) can be supported on either charcoal or alumina, and materials such as lithium aluminum hydride, boron, alkali metals, and alkaline-earth hydrides may be used as promotors. Variations of this process are reported to produce polyethylene resins with densities from 0.94-0.97. 

---