Nickel-molybdenum oxide catalyst

IR spectra, 27 283, 284 magnetic measurements, 27 280 oxidized state, 27 289 Raman spectra, 27 284 reduced state, 27 291 reflectance spectroscopy, 27 279 X-ray diffraction, 27 272, 273 support interactions, 27 290 Cobalt monoxide, field effect, 27 44, 45 Cobalt(nickel)-molybdenum-sulfide catalysts, 42 417... 

The newest and most commercially successful process involves vapor phase oxidation of propylene to AA followed by esterification to the acrylate of your choice. Chemical grade propylene (90—95% purity) is premixed with steam and oxygen and then reacted at 650—700°F and 60—70 psi over a molybdate-cobait or nickel metal oxide catalyst on a silica support to give acrolein (CH2=CH-CHO), an intermediate oxidation product on the way to AA. Other catalysts based on cobalt-molybdenum vanadium oxides are sometimes used for the acrolein oxidation step. 

Shen, Q Zhu, X., and Dong, J. (2009) Hydrodealkylation of C9-t aromatics to BTX over zeolite-supported nickel oxide and molybdenum oxide catalysts. Catal. Lett., 129, 170-180. 

For these reasons the design of a desulphurisation system must be undertaken with care. If the fuel cell plant has a source of hydrogen-rich gas (usually from the reformer exit), it is common practice to recycle a small amount of this back to a hydrodesulphurisation (HDS) reactor. In this reactor, any organic sulphur-containing compounds are converted, over a supported nickel-molybdenum oxide or cobalt-molybdenum oxide catalyst, into hydrogen sulphide via hydrogenolysis reactions of the type... 

It is used in certain nickel-based alloys, such as the "Hastelloys(R)" which are heat-resistant and corrosion-resistant to chemical solutions. Molybdenum oxidizes at elevated temperatures. The metal has found recent application as electrodes for electrically heated glass furnaces and foreheaths. The metal is also used in nuclear energy applications and for missile and aircraft parts. Molybdenum is valuable as a catalyst in the refining of petroleum. It has found applications as a filament material in electronic and electrical applications. Molybdenum is an... 

Natural gas contains both organic and inorganic sulfur compounds that must be removed to protect both the reforming and downstream methanol synthesis catalysts. Hydrodesulfurization across a cobalt or nickel molybdenum—zinc oxide fixed-bed sequence is the basis for an effective purification system. For high levels of sulfur, bulk removal in a Hquid absorption—stripping system followed by fixed-bed residual clean-up is more practical (see Sulfur REMOVAL AND RECOVERY). Chlorides and mercury may also be found in natural gas, particularly from offshore reservoirs. These poisons can be removed by activated alumina or carbon beds. 

The predominant process for manufacture of aniline is the catalytic reduction of nitroben2ene [98-95-3] ixh. hydrogen. The reduction is carried out in the vapor phase (50—55) or Hquid phase (56—60). A fixed-bed reactor is commonly used for the vapor-phase process and the reactor is operated under pressure. A number of catalysts have been cited and include copper, copper on siHca, copper oxide, sulfides of nickel, molybdenum, tungsten, and palladium—vanadium on alumina or Htbium—aluminum spinels. Catalysts cited for the Hquid-phase processes include nickel, copper or cobalt supported on a suitable inert carrier, and palladium or platinum or their mixtures supported on carbon. 

Ammonia production from natural gas includes the following processes desulfurization of the feedstock primary and secondary reforming carbon monoxide shift conversion and removal of carbon dioxide, which can be used for urea manufacture methanation and ammonia synthesis. Catalysts used in the process may include cobalt, molybdenum, nickel, iron oxide/chromium oxide, copper oxide/zinc oxide, and iron. 

The reaction scheme is rather complex also in the case of the oxidation of o-xylene (41a, 87a), of the oxidative dehydrogenation of n-butenes over bismuth-molybdenum catalyst (87b), or of ethylbenzene on aluminum oxide catalysts (87c), in the hydrogenolysis of glucose (87d) over Ni-kieselguhr or of n-butane on a nickel on silica catalyst (87e), and in the hydrogenation of succinimide in isopropyl alcohol on Ni-Al2Oa catalyst (87f) or of acetophenone on Rh-Al203 catalyst (87g). Decomposition of n-and sec-butyl acetates on synthetic zeolites accompanied by the isomerization of the formed butenes has also been the subject of a kinetic study (87h). 

Catalysts used for hydrodesulfurization (HDS) and hydrodenitrogenation (HDN) of heavy oil fractions are largely based on alumina-supported molybdenum or tungsten to which cobalt or nickel is added as a promoter [11]. As the catalysts are active in the sulfided state, activation is carried out by treating the oxidic catalyst precursor in a mixture of H2S and H2 (or by exposing the catalyst to the sulfur-containing feed). The function of hydrogen is to prevent the decomposition of the relatively unstable H2S to elemental sulfur, which would otherwise accumulate on the surface of the... 

Another SIMS study on model systems concerns molybdenum sulfide catalysts. The removal of sulfur from heavy oil fractions is carried out over molybdenum catalysts promoted with cobalt or nickel, in processes called hydrodesulfurization (HDS) [17]. Catalysts are prepared in the oxidic state but have to be sulfided in a mixture of H2S and H2 in order to be active. SIMS sensitively reveals the conversion of Mo03 into MoSi, in model systems of MoCf supported on a thin layer of Si02 [21]. 

Similarly to the case of direct-oxidation anode materials, sulfur-tolerant anode materials based on sulfides [6, 7] or double-perovskite oxides have special requirements for their processing into SOFC layers. For example, nickel sulfide-promoted molybdenum sulfide is tolerant to high sulfur levels [7], However, it has a low melting temperature [6] that has resulted in the development of cobalt sulfide as a stabilizer of the molybdenum sulfide catalyst [6], CoS-MoS2 admixed with Ag has an even higher performance in H2S-containing fuels than in pure H2 [6]. However, processing methods such as PS, infiltration, or sol-gel techniques that can process... 

Reduction. Benzene can be reduced to cyclohexane [110-82-7], C5H12, or cycloolefins. At room temperature and ordinary pressure, benzene, either alone or in hydrocarbon solvents, is quantitatively reduced to cyclohexane with hydrogen and nickel or cobalt (14) catalysts. Catalytic vapor-phase hydrogenation of benzene is readily accomplished at about 200°C with nickel catalysts. Nickel or platinum catalysts are deactivated by the presence of sulfur-containing impurities in the benzene and these metals should only be used with thiophene-free benzene. Catalysts less active and less sensitive to sulfur, such as molybdenum oxide or sulfide, can be used when benzene is contaminated with sulfur-containing impurities. Benzene is reduced to 1,4-cydohexadiene [628-41-1], C6HS, with alkali metals in liquid ammonia solution in the presence of alcohols (15). 

Shortly after the introduction of the bismuth molybdate catalysts, SOHIO developed and commercialized an even more selective catalyst, the uranium antimonate system (4). At about the same time, Distillers Company, Ltd. developed an oxidation catalyst which was a combination of tin and antimony oxides (5). These earlier catalyst systems have essentially been replaced on a commercial scale by multicomponent catalysts which were introduced in 1970 by SOHIO. As their name implies, these catalysts contain a number of elements, the most commonly reported being nickel, cobalt, iron, bismuth, molybdenum, potassium, manganese, and silica (6-8). 

Molybdena catalysts have been with us for quite a long time. The term molybdena is used here to denote a composite catalyst consisting of molybdenum oxide supported on an activated support, commonly alumina. Early it was found that certain transition metals, notably cobalt and nickel, promote the molybdena catalyst for hydrodesulfurization (HDS) reactions. 

---