Methods of stabilizing

Stabilization of the Cellular State. The increase in surface area corresponding to the formation of many ceUs in the plastic phase is accompanied by an increase in the free energy of the system hence the foamed state is inherently unstable. Methods of stabilizing this foamed state can be classified as chemical, eg, the polymerization of a fluid resin into a three-dimensional thermoset polymer, or physical, eg, the cooling of an expanded thermoplastic polymer to a temperature below its second-order transition temperature or its crystalline melting point to prevent polymer flow. 

A new method of stabilizing metalated epoxides through remote coordination has recently been introduced, allowing stereoselective access to a range of epoxylactones. Epoxylactone 216 was converted into the phytotoxin xylobovide (Scheme 5.50) [75]... 

S. Kanda, M. Yanagita, and Y. Sekimoto. A method of stabilizing a fracturing fluid and a stabilized fracturing fluid. Patent GB 2172(X)7, 1986. 

The stabilization of the zwitterionic o-QM precursors is due to electrostatic interactions. It was reasonable to assume that also the other methods of stabilizing the zwitterions might be viable, and indeed it was confirmed that both steric and electronic effects are able to stabilize such intermediates. In 5-(4-octyl)-y-tocopherol (5a-butyl-5a-propyl-a-tocopherol, 21), the octyl group acts as a flywheel, which impedes the rotation of the C-5a moiety into the ring plane as compared to the parent zwitterions with the unsubstituted exocyclic methylene group. The situation is... 

As mentioned earlier in this chapter, penicillins are very unstable in aqueous solution by virtue of hydrolysis of the p-lactam ring. A successful method of stabilizing penicillins in liquid dosage forms is to prepare their insoluble salts and formulate them in suspensions. The reduced solubility of the drug in a suspension decreases the amount of drug available for hydrolysis. An example of improved stability of a... 

There are various methods of stabilizing a pigment in order to prevent conversion to a different phase, i.e., change of modification, and flocculation during pigment application. The two following techniques have been found to be most effective ... 

In 55% of the cases, the accidents could have been foreseen by use of risk analysis, and in 35% of the cases by thermal stability testing. Different methods of stability testing were evaluated comparatively during the investigation of a runaway exothermic reaction which occurred during the preparation of a component mixture for a sealing composition in a 1200 1 reactor only DSC was effective in identifying the cause of the hazard. 

According to the developer, the reagents for the RocTec process cost less than 0.10/lb, as compared to 0.07/lb for cement and 0.50/lb for polyethylene. Table 1 shows the relative amounts of additive required for these methods of stabilization and the costs of each (D169497,... 

Methods of stabilizing bomb flights are shown in Ref 44, Fig on p B227-L... 

Stabilization of bomb flights is usually achieved by fins, but if a slow descent is desirable parachutes or parasheets are used. Fig on p B227-L of Ref 44 gives an idea about methods of stabilizing bombs in flight... 

Fin Stabilization is defined in Glossary (Ref 2, p 115-R) as the method of stabilizing a projectile, as a rocket, bomb or missile, during flight by the aerodynamic use of pro trading fins... 

Spin Stabilization is defined in Ref 2, p 270-R as the method of stabilizing a projectile during flight by causing it to rotate about its own longitudinal axis... 

There are many methods of stabilizing nitrocellulose. In different countries and in various plants, a variety of techniques are in use, partly as a result of local conditions, e.g. the quality of the water available for stabilization boiling, but influenced also by tradition and by the development of earlier processes. 

This method of stabilization is very expensive, and takes an exceptionally long time — several days. It is therefore necessary to arrange a considerable number of kiers and hence a large and costly installation is required. Pascal [1] states that in a factory to produce 100 tons of nitrocotton a day some 400-500 vessels of 2-4 m3 should be installed. 

The introduction of autoclaves, which considerably reduced the time required for boiling, brought about a marked improvement in commercial methods of stabilization. The high installation costs for the high pressure system are fully compensated by the very much shorter stabilization process. 

Some bombs are carried in racks. Other bombs are assembled in clusters for dropping as a unit. (See Fig), Methods of stabilizing bomb flights are shown on Fig... 

It has been found that there are several methods to stabilize the burning in central perforations of rocket proplnts. The most common method is the drilling of radial holes through the grain web at even intervals along the axis, as described in detail in Ref 3,pp 124-7. Another method of stabilization is insertion of a rod of nonburning material in the center of the axial perforation of the grain(Ref 3,p 128). A third... 

Another method of stabilizing the surface of semiconductor electrodes relates to an electrolyte modification, using solution mediators that efficiently accept the electron from the semiconductor to subsequently reduce C02. In aqueous solution, Taniguchi et al. used a p-GaP photoelectrode in the presence of 15-crown-5 ether at a potential of-0.95 V (versus SCE) [119]. In this case, current efficiencies of 44%, 15%, and 4% were observed for methanol, formic acid, and formaldehyde, respectively. 

The relationship is unusual in the former case, in that it involves migration of an electron from the tr-bond into the 77-system when the proton is lost. That such reactions do not occur in 100% sulphuric acid sets a limit on the pK values for the radicals studied, and it would appear that one method of stabilization of the neutral radicals would be to protonate them in an acidic medium. 

This product consists of milk from which most of the fat has been removed but which contains all the protein. The protein has a high biological value and is very digestible. Skim milk is a good source of B vitamins, but the fat-soluble vitamins (A and D) are removed with the fat. Skim milk should either be fresh or always at the same degree of sourness. Attention should be paid to the cleanliness of the equipment used for feeding. Normal bacterial acidification can be used as an effective and convenient method of stabilization. 

---