Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Metal enolates methylenation

In general, examples of substitution of sodium and potassium in organometallic derivatives by fluorine are limited to the salts of active methylene compounds. Their fluorination is achieved with perchloryl fluoride.fluorine, N-F reagents. " and xenon difluoride " (Table 10). The fluorination of metal enolates is discussed under metal-assisted substitution ot... [Pg.13]

Transition metal enolates were introduced into organic synthesis in 1981 by Reetz and Peter, who reported that titanium enolates are easily accessible using cheap reagents, distillable and miscible in THF, ether, methylene chloride or pentane, and display pronounced erithro selectivity in reactions with aldehydes. Since then, the importance of these versatile nucleophiles has steadily increased and compounds which can be represented as 57 or 58 have been identified. [Pg.484]

When preformed iminium salts are utilized in Mannich reactions, the reaction medium no longer needs to be a protic solvent, so the use of aprotic solvents allows the transformation of sensitive intermediates such as metal enolates. L.A. Paquette et al. carried out the highly regioselective introduction of an exo-methylene functionality during the total synthesis of (-)-O-methylshikoccin by reacting a potassium enolate with the Eschenmoser salt. The resulting p-A/,A/-dimethylamino ketone was converted to the corresponding quaternary ammonium salt and elimination afforded the desired a,p-unsaturated ketone (Eschenmoser methenylation). [Pg.275]

C-H bond in active methylene compounds is acidic and can also oxidatively add to low-valent transition metal complexes giving transition metal enolates. Eor example, acetylacetone oxidatively adds to low-valent Mo complexes giving hydrido(acetylacetonato)metal complexes [197]. [Pg.179]

Because the stmcture of 1,3-diketones comprise a methylene group between two activating carbonyls, equiUbrium is shifted toward the enol form. The equihbrium distribution varies with stmcture and solvent (303,306) (Table 13). The enol forms are cycHc and acidic and form covalent, colored, soHd chelates with metals ... [Pg.498]

As mentioned earlier, metal complexation not only allows isolation of the QM derivatives but can also dramatically modify their reactivity patterns.29o-QMs are important intermediates in numerous synthetic and biological processes, in which the exocyclic carbon exhibits an electrophilic character.30-33 In contrast, a metal-stabilized o-QM can react as a base or nucleophile (Scheme 3.16).29 For instance, protonation of the Ir-T 4-QM complex 24 by one equivalent of HBF4 gave the initial oxo-dienyl complex 25, while in the presence of an excess of acid the dicationic complex 26 was obtained. Reaction of 24 with I2 led to the formation of new oxo-dienyl complex 27, instead of the expected oxidation of the complex and elimination of the free o-QM. Such reactivity of the exocyclic methylene group can be compared with the reactivity of electron-rich enol acetates or enol silyl ethers, which undergo electrophilic iodination.34... [Pg.78]

Titanium enolates.1 This Fischer carbene converts epoxides into titanium enolates. In the case of cyclohexene oxide, the product is a titanium enolate of cyclohexanone. But the enolates formed by reaction with 1,2-epoxybutane (equation I) or 2,3-epoxy butane differ from those formed from 2-butanone (Equation II). Apparently the reaction with epoxides does not involve rearrangement to the ketone but complexation of the epoxide oxygen to the metal and transfer of hydrogen from the substrate to the methylene group. [Pg.49]

Various transition metals have been used in redox processes. For example, tandem sequences of cyclization have been initiated from malonate enolates by electron-transfer-induced oxidation with ferricenium ion Cp2pe+ (51) followed by cyclization and either radical or cationic termination (Scheme 41). ° Titanium, in the form of Cp2TiPh, has been used to initiate reductive radical cyclizations to give y- and 5-cyano esters in a 5- or 6-exo manner, respectively (Scheme 42). The Ti(III) reagent coordinates both to the C=0 and CN groups and cyclization proceeds irreversibly without formation of iminyl radical intermediates.The oxidation of benzylic and allylic alcohols in a two-phase system in the presence of r-butyl hydroperoxide, a copper catalyst, and a phase-transfer catalyst has been examined. The reactions were shown to proceed via a heterolytic mechanism however, the oxidations of related active methylene compounds (without the alcohol functionality) were determined to be free-radical processes. [Pg.143]

Organometallic methods, with the possible exception of those involving the stoichiometric generation of enolates and other stabilized carbanionic species 140], have seldom been used in carbohydrate chemistry for the synthesis of cyclohexane and cyclopentane derivatives. The present discussion will not cover these areas. The earliest of the examples using a catalytic transition metal appears in the work of Trost and Runge [41], who reported the Pd-catalyzed transformation of the mannose-derived intermediate 22 to the functionalized cyclopentane 23 in 98% yield (Scheme 10). Under a different set of conditions, the same substrate gives a cycloheptenone 24. Other related reactions are the catalytic versions of the Ferrier protocol for the conversion of methylene sugars to cyclohexanones (see Chap. 26) [40,42,43]. [Pg.555]

The representative reaction system applied in asymmetric phase-transfer catalysis is the biphasic system composed of an organic phase containing an acidic methylene or methine compound and an electrophile, and an aqueous or solid phase of inorganic base such as alkaline metal (Na, K, Cs) hydroxide or carbonate. The key reactive intermediate in this type of reaction is the onium carbanion species, mostly onium enolate or nitronate, which reacts with the electrophile in the organic phase to afford the product. [Pg.2]

For the quantitative deprotonation of nitroalkanes and active-methylene compounds, there is no need to employ the heavy artillery of lithium amides. Rather, it suffices to employ alkaline earth metal alkoxides or alkaline earth metal hydroxides. In addition, equilibrium reactions between these C,H acids and amines form enough enolate to initiate enolate reactions. [Pg.527]

It should be noted that PCMU based on cross-linked macroligands possess a relatively high chemical and thermal stability. The stability of poly(enol-ketonate) chelates obtained by oxidation of thin polyvinylacetate films increases in the series of mono-, di- and trivalent ions [122], the oxidation promoting the penetration of the metal ions into the deep film layers. The weight loss of Co and Mn polychelates based on the condensation products of stoichiometric amounts of 5,5 -methylene-bis-salicylaldehyde and 4,4 -diaminophenyl ether at 300, 500, and 600 °C is 2.1, and 0.5 8.0 and 9.8 25.0 and 27.5%, respectively [14b]. The stability, in the range between 275 and 640 °C, of chelates formed by the transition metals and condensation products of p-hydroxybenzoic acid, urea and formaldehyde follow the series [123] Fe(III)>Co(II)>Cu(II)>Ni(II)>V02(II)> Zn(II) Mn(II) > CML. [Pg.96]

Among common carbon-carbon bond formation reactions involving carbanionic species, the nucleophilic substitution of alkyl halides with active methylene compounds in the presence of a base, e. g., malonic and acetoacetic ester syntheses, is one of the most well documented important methods in organic synthesis. Ketone enolates and protected ones such as vinyl silyl ethers are also versatile nucleophiles for the reaction with various electrophiles including alkyl halides. On the other hand, for the reaction of aryl halides with such nucleophiles to proceed, photostimulation or addition of transition metal catalysts or promoters is usually required, unless the halides are activated by strong electron-withdrawing substituents [7]. Of the metal species, palladium has proved to be especially useful, while copper may also be used in some reactions [81. Thus, aryl halides can react with a variety of substrates having acidic C-H bonds under palladium catalysis. [Pg.213]

In regard to the uiUc ketones, they form the acetates m their enol form equally well io acid medium, the /3-diketones and the /7-keto esters, in the presence cS metals or bases, give compovindR with an acetyl group on the carbon atom of the active methylene group ... [Pg.79]


See other pages where Metal enolates methylenation is mentioned: [Pg.105]    [Pg.49]    [Pg.408]    [Pg.380]    [Pg.2]    [Pg.25]    [Pg.55]    [Pg.208]    [Pg.204]    [Pg.207]    [Pg.21]    [Pg.695]    [Pg.294]    [Pg.220]    [Pg.419]    [Pg.208]    [Pg.521]    [Pg.318]    [Pg.376]    [Pg.509]    [Pg.71]    [Pg.129]    [Pg.84]    [Pg.81]    [Pg.137]    [Pg.534]    [Pg.257]    [Pg.622]   
See also in sourсe #XX -- [ Pg.532 ]




SEARCH



Metal enolate

Metal enolates

© 2024 chempedia.info