Metal complexes, adsorption characterization

Supported metal carbonyl clusters are alternatively formed from mononuclear metal complexes by surface-mediated synthesis [5,13] examples are [HIr4(CO)ii] formed from Ir(CO)2(acac) on MgO and Rh CCOlie formed from Rh(CO)2(acac) on y-Al203 [5,12,13]. These syntheses are carried out in the presence of gas-phase CO and in the absence of solvents. Synthesis of metal carbonyl clusters on oxide supports apparently often involves hydroxyl groups or water on the support surface analogous chemistry occurs in solution [ 14]. A synthesis from a mononuclear metal complex precursor is usually characterized by a yield less than that attained as a result of simple adsorption of a preformed metal cluster, and consequently the latter precursors are preferred when the goal is a high yield of the cluster on the support an exception is made when the clusters do not fit into the pores of the support (e.g., a zeolite), and a smaller precursor is needed. 

Among the main goals of electrochemical research are the design, characterization and understanding of electrocatalytic systems, (1-2) both in solution and on electrode surfaces. (3.) Of particular importance are the nature and structure of reactive intermediates involved in the electrocatalytic reactions.(A) The nature of an electrocatalytic system can be quite varied and can include activation of the electrode surface by specific pretreatments (5-9) to generate active sites, deposition or adsorption of metallic adlayers (10-111 or transition metal complexes. (12-161 In addition the electrode can act as a simple electron shuttle to an active species in solution such as a metallo-porphyrin or phthalocyanine. 

Other Compounds. Adsorption of MeNC into a cobalt(ii) zeolite at — 196"C was followed by e.s.r. spectroscopy, and the presence of low-spin [Co-(CNMe)j] and [Co(CNMe) ] complex cations demonstrated.This work represents one of the few successful attempts to produce well-characterized transition-metal complexes in a zeolite framework. Addition of NaCp to CoClj and [(BgC2H,Q)CoCp], previously reduced with sodium naphthalide gives a new bimetallic complex, for which structure (94) is proposed. ... 

Analytical separation and spectroscopic techniques normally used for petroleum crudes and residues were modified and used to characterize coal liquids, tar sands bitumens, and shale oils. These techniques include solvent extraction, adsorption, ion-exchange, and metal complexing chromatography to provide discrete fractions. The fractions are characterized by various physical and spectroscopic methods such as GLC, MS, NMR, etc. The methods are relatively fast, require only a few grams of sample, provide compound type fractions for detailed characterization, and provide comparative compositional profiles for natural and synthetic fuels. Additional analytical methods are needed in some areas. 

In this chapter, recent results are discussed In which the adsorption of nitric oxide and its Interaction with co-adsorbed carbon monoxide, hydrogen, and Its own dissociation products on the hexagonally close-packed (001) surface of Ru have been characterized using EELS (13,14, 15). The data are interpreted In terms of a site-dependent model for adsorption of molecular NO at 150 K. Competition between co-adsorbed species can be observed directly, and this supports and clarifies the models of adsorption site geometries proposed for the individual adsorbates. Dissociation of one of the molecular states of NO occurs preferentially at temperatures above 150 K, with a coverage-dependent activation barrier. The data are discussed in terms of their relevance to heterogeneous catalytic reduction of NO, and in terms of their relationship to the metal-nitrosyl chemistry of metallic complexes. 

Some of the most thoroughly characterized supported metal complexes are zeolite-supported metal carbonyls. These have been prepared, for example, by the adsorption of Rh(CO)2(acac) on zeolites (e.g., the faujasite zeolite NaY [26] or dealuminated zeolite Y [27]) followed by CO treatment of the resultant material (Fig. 19.3). The IR spectra (not shown, but found in [26, 27]) of the rhodium dicarbonyl represented in Fig. 19.3 are consistent with a square-planar complex (formally Rh(I)) with the Rh atom bonded to two zeolite oxygen atoms. 

The high sensitivity of the Advanced Photon Source (APS) at Argonne National Laboratory has permitted the study of dilute solutions (200 ppm and above) of the noble metal complexes H2PtCl6 and NaAuCL. The changes in coordination chemistry of these materials upon adsorption have been investigated. This molecular characterization permits a more detailed study of the adsorption mechanism... 

Some early proposals for the modes of adsorption of thiophenes on metal sulfides have been probed by comparisons with the structures of well-characterized metal complexes this has allowed the identification of the most reasonable alternatives and of new possibilities not previously considered. Tlieoretical studies on such complexes at increasing levels of sophistication have also contributed in an Important manner to provide a clear and consistent picture of the different possible bonding modes of thiophenes to metal centers. When these theoretical and experimental results from molecular chemistry are combined with the information available from surface techniques and heterogeneous catalysis, the chemisorption of this type of organosulfur compounds on metal sulfides arises as a very well understood phenomenon. This is no doubt one of the most important achievements of the organometallic modeling approach to HDS chemistry. 

Several studies in recent years have focussed on the preparation and characterization of metal particles in zeolites (1). Various ways have been developed to introduce metals and metal precursors including sublimation (2), adsorption (3), and ion-exchange (4). If it is desirable to remove the ligands from the precursor metal complexes many approaches can be used including high temperature reduction in hydrogen (5), photochemical degradation (6), sodium (7) or cadmium (8) reduction, H atom reduction (9), low temperature vacuum treatments (10) and plasma methods (11). 

Favere, V. T. (2008). Chitosan cross-linked with a metal complexing agent Synthesis, characterization and copperfll) ions adsorption. React. Funct. Polym. 68, 572-579. 

A new chitosan biopolymer derivative as metal-complexing agent Synthesis, characterization, and metal(II) ion adsorption studies Carbohydr Res. 345(14), 2013-2022. 

Model Studies. In model studies of adsorption, one deals with simple, well-defined systems, where usually a single well-characterized solid phase is used and the composition of the ionic medium is known, so that reactions competing with the adsorption may be predicted. It is not a trivial problem to compare the results from such model studies with those from field studies, or to use model results for the interpretation of field data. In field studies, a complex mixture of solid phases and dissolved components, whose composition is only poorly known, has to be considered competitive reactions of major ions and trace metal ions for adsorption may take place, and the speciation of the trace metal ions is often poorly understood. In order to relate field studies to model studies, distribution coefficients of elements between the dissolved and solid phases are useful. These distribution coefficients are of the following form ... 

---