Metal carbonyls Molybdenum carbonyl

Selectivities to various isomers are more difficult to predict when metal oxides are used as catalysts. ZnO preferentially produced 79% 1-butene and several percent of i7j -2-butene [624-64-6] (75). CdO catalyst produced 55% 1-butene and 45% i7j -2-butene. It was also reported that while interconversion between 1-butene and i7j -2-butene was quite facile on CdO, cis—trans isomeri2ation was slow. This was attributed to the presence of a TT-aHyl anion intermediate (76). High i7j -2-butene selectivities were obtained with molybdenum carbonyl encapsulated in 2eohtes (77). On the other hand, deuteration using H1O2 catalyst produced predominantly the 1,4-addition product, trans-2-huX.en.e-d2 with no isotope scrambling (78). 

Syntheses from Dry Metals and Salts. Only metaUic nickel and iron react direcdy with CO at moderate pressure and temperatures to form metal carbonyls. A report has claimed the synthesis of Co2(CO)g in 99% yield from cobalt metal and CO at high temperatures and pressures (91,92). The CO has to be absolutely free of oxygen and carbon dioxide or the yield is drastically reduced. Two patents report the formation of carbonyls from molybdenum and tungsten metal (93,94). Ruthenium and osmium do not react with CO even under drastic conditions (95,96). 

When heated to about 60°C, nickel carbonyl explodes. Eor both iron and nickel carbonyl, suitable fire extinguishers are water, foam, carbon dioxide, or dry chemical. Large amounts of iron pentacarbonyl also have been reported to ignite spontaneously (189). Solutions of molybdenum carbonyl have been reported to be capable of spontaneous detonation (190). The toxicity of industrial chemicals including metal carbonyls may be found in references 191-194. 

Iron, nickel, cobalt, molybdenum, and tungsten powders produced by the pyrolysis of the respective metal carbonyl (see Ch. 3).P 1... 

Many carbonyl and carbonyl metallate complexes of the second and third row, in low oxidation states, are basic in nature and, for this reason, adequate intermediates for the formation of metal— metal bonds of a donor-acceptor nature. Furthermore, the structural similarity and isolobal relationship between the proton and group 11 cations has lead to the synthesis of a high number of cluster complexes with silver—metal bonds.1534"1535 Thus, silver(I) binds to ruthenium,15 1556 osmium,1557-1560 rhodium,1561,1562 iron,1563-1572 cobalt,1573 chromium, molybdenum, or tungsten,1574-1576 rhe-nium, niobium or tantalum, or nickel. Some examples are shown in Figure 17. 

The mononuclear metal carbonyls contain only one metal atom, and they have comparatively simple structures. For example, nickel tetracarbonyl is tetrahedral. The pentacarbonyls of iron, ruthenium, and osmium are trigonal bipyramidal, whereas the hexacarbonyls of vanadium, chromium, molybdenum, and tungsten are octahedral. These structures are shown in Figure 21.1. 

The work cited in sections 2.4 and 2.5 is representative of the SN1 substitution reactions of metal carbonyls. However, a much more extensive and detailed account has recently been published covering similar reactions of vanadium, chromium, molybdenum, tungsten, rhenium, iron and nickel carbonyls in addition to those of manganese and cobalt2 9a. 

In a similar manner, Jt-allyl complexes of manganese, iron, and molybdenum carbonyls have been obtained from the corresponding metal carbonyl halides [5], In the case of the reaction of dicarbonyl(r 5-cyclopentadienyl)molybdenum bromide with allyl bromide, the c-allyl derivative is obtained in 75% yield in dichloromethane, but the Jt-allyl complex is the sole product (95%), when the reaction is conducted in a watenbenzene two-phase system. Similar solvent effects are observed in the corresponding reaction of the iron compound. As with the cobalt tetracarbonyl anion, it is... 

Transition metal complexes which react with diazoalkanes to yield carbene complexes can be catalysts for diazodecomposition (see Section 4.1). In addition to the requirements mentioned above (free coordination site, electrophi-licity), transition metal complexes can catalyze the decomposition of diazoalkanes if the corresponding carbene complexes are capable of transferring the carbene fragment to a substrate with simultaneous regeneration of the original complex. Metal carbonyls of chromium, iron, cobalt, nickel, molybdenum, and tungsten all catalyze the decomposition of diazomethane [493]. Other related catalysts are (CO)5W=C(OMe)Ph [509], [Cp(CO)2Fe(THF)][BF4] [510,511], and (CO)5Cr(COD) [52,512]. These compounds are sufficiently electrophilic to catalyze the decomposition of weakly nucleophilic, acceptor-substituted diazoalkanes. 

In addition to the successful reductive carbonylation systems utilizing the rhodium or palladium catalysts described above, a nonnoble metal system has been developed (27). When methyl acetate or dimethyl ether was treated with carbon monoxide and hydrogen in the presence of an iodide compound, a trivalent phosphorous or nitrogen promoter, and a nickel-molybdenum or nickel-tungsten catalyst, EDA was formed. The catalytst is generated in the reaction mixture by addition of appropriate metallic complexes, such as 5 1 combination of bis(triphenylphosphine)-nickel dicarbonyl to molybdenum carbonyl. These same catalyst systems have proven effective as a rhodium replacement in methyl acetate carbonylations (28). Though the rates of EDA formation are slower than with the noble metals, the major advantage is the relative inexpense of catalytic materials. Chemistry virtually identical to noble-metal catalysis probably occurs since reaction profiles are very similar by products include acetic anhydride, acetaldehyde, and methane, with ethanol in trace quantities. 

In the course of a study of the formation of fluorophosphoranes from chloro-phosphines (22) we observed one exception in the compound chloromethyldi-chlorophosphine, which reacted smoothly with antimony trifluoride to give the flammable fluorophosphine, C1CH2PF2, under conditions where many other chloro-phosphines were invariably converted into fluorophosphoranes. As this fluorophosphine is readily available, its interaction with a metal carbonyl derivative was studied, and cycloheptatriene molybdenum tricarbonyl, obtained from the reaction of molybdenum hexacarbonyl with cycloheptatriene (I, 2), was chosen as a starting compound. 

Cyclopentadienyl molybdenum-sulfur compounds are useful synthons for the preparation of Mo—M—S (e.g. M = Fe (see Section 36.6.2), Co, Ni) clusters103-108 144 in reactions with metal carbonyls. However, the principal interest in molecules of this class has arisen because of the reactivity of the Mo—S system, primarily in respect of the making and breaking of S—H... 

The use of highly dispersed catalysts from soluble salts of molybdenum is another approach to the reduction of catalyst amount because of their excellent activity despite their higher price. Recently, metal carbonyl compounds, such as Fe(CO)5, Ru3(CO)i2, and Mo(CO)6 have been investigated as metal cluster catalysts. Preparation involved their deposition and decomposition on catalyst support surfaces (71-73). 

Hi) Formation of transition metal carbonyl complexes Ashe and Colburn have reported (77JA8099) the synthesis of molybdenum carbonyl complexes of arsenin and antimonin but were unable to prepare bismin complexes because of its lability (Scheme 23). As expected for electron-rich aromatic compounds, both formed six-electron 7r-complexes (113) by a ligand displacement mechanism. Arsenin also forms a two-electron complex (114) analogous to those formed by pyridine, whereas antimonin did not give a similar complex under the conditions of this reaction. 

Support-bound transition metal complexes have mainly been prepared as insoluble catalysts. Table 4.1 lists representative examples of such polymer-bound complexes. Polystyrene-bound molybdenum carbonyl complexes have been prepared for the study of ligand substitution reactions and oxidative eliminations [51], Moreover, well-defined molybdenum, rhodium, and iridium phosphine complexes have been prepared on copolymers of PEG and silica [52]. Several reviews have covered the preparation and application of support-bound reagents, including transition metal complexes [53-59]. Examples of the preparation and uses of organomercury and organo-zinc compounds are discussed in Section 4.1. 

Subsequent to the initial work outlined above, high field H and 13C NMR studies of 11 and model compounds supported the original suggestion for its structure80-83. In terms of model compounds one of the key approaches taken was to use the metal carbonyl complexes of the homotropenylium ion system. Thus the molybdenum, 12, chromium, 13, and... 

---