Membranes practical production

Concerning the content of the book, because the author has spent most of his working life in the laboratory of a company or university, where the study of membranes and products is related to commercialization, the book mainly consists of his practical experiences or knowledge, and is not theoretical. 

Reverse Osmosis. This was the first membrane-based separation process to be commercialized on a significant scale. The breakthrough discovery that made reverse osmosis (qv) possible was the development of the Loeb-Sourirajan asymmetric cellulose acetate membrane. This membrane made desalination by reverse osmosis practical within a few years commercial plants were installed. The total worldwide market for reverse osmosis membrane modules is about 200 million /yr, spHt approximately between 25% hoUow-ftber and 75% spiral-wound modules. The general trend of the industry is toward spiral-wound modules for this appHcation, and the market share of the hoUow-ftber products is gradually falling (72). 

Electrodialysis. In electro dialysis (ED), the saline solution is placed between two membranes, one permeable to cations only and the other to anions only. A direct electrical current is passed across this system by means of two electrodes, causiag the cations ia the saline solution to move toward the cathode, and the anions to the anode. As shown ia Figure 15, the anions can only leave one compartment ia their travel to the anode, because a membrane separating them from the anode is permeable to them. Cations are both excluded from one compartment and concentrated ia the compartment toward the cathode. This reduces the salt concentration ia some compartments, and iacreases it ia others. Tens to hundreds of such compartments are stacked together ia practical ED plants, lea ding to the creation of alternating compartments of fresh and salt-concentrated water. ED is a continuous-flow process, where saline feed is continuously fed iato all compartments and the product water and concentrated brine flow out of alternate compartments. 

Advantages to Membrane Separation This subsertion covers the commercially important membrane applications. AU except electrodialysis are pressure driven. All except pervaporation involve no phase change. All tend to be inherently low-energy consumers in the-oiy if not in practice. They operate by a different mechanism than do other separation methods, so they have a unique profile of strengths and weaknesses. In some cases they provide unusual sharpness of separation, but in most cases they perform a separation at lower cost, provide more valuable products, and do so with fewer undesirable side effects than older separations methods. The membrane interposes a new phase between feed and product. It controls the transfer of mass between feed and product. It is a kinetic, not an equihbrium process. In a separation, a membrane will be selective because it passes some components much more rapidly than others. Many membranes are veiy selective. Membrane separations are often simpler than the alternatives. 

Whey concentration, both of whole whey and ultrafiltration permeate, is practiced successfully, but the solubility of lactose hmits the practical concentration of whey to about 20 percent total sohds, about a 4x concentration fac tor. (Membranes do not tolerate sohds forming on their surface.) Nanofiltration is used to soften water and clean up streams where complete removal of monovalent ions is either unnecessary or undesirable. Because of the ionic character of most NF membranes, they reject polyvalent ions much more readily than monovalent ions. NF is used to treat salt whey, the whey expressed after NaCl is added to curd. Nanofiltration permits the NaCl to permeate while retaining the other whey components, which may then be blended with ordinaiy whey. NF is also used to deacidify whey produced by the addition of HCl to milk in the production of casein. 

Unrestricted use of reclaimed wastewater for drinking water, however, requires careful examination. While practically a complete barrier to viruses, bacteria, and other toxic entities that must be kept out of a potable supply, RO membranes could pose serious problems should any defect develop in their separation mechanism. Given the purity and clarity of RO-treated wastewaters, however, it might be advantageous to use RO and then subject the product to well-established disinfection procedures. 

Severe attack frequently occurs at a water-line, which in practice can range from structural steel partly immersed in a natural water to a lacquered tin can used for containing emulsion paint. This can be illustrated by adding increeising amounts of sodium carbonate to a sodium chloride solution in which a steel plate is partly immersed (Fig. 1.48c, d and e). With increase in concentration of the inhibitor, attack decreases and becomes confined to the water-line. The attack at the water-line is intense and is characterised by a triangular pasty mass of corrosion products bounded on the upper surface by a dark-brown membrane that follows the contour of the water-line. The mechanism of water-line attack is not clear, but it is likely that the membrane of corrosion products results in the formation of an occluded cell, in which the anolyte and catholyte are prevented from mixing. These occluded cells are discussed in more detail subsequently. 

Many procedures have been suggested to achieve efficient cofactor recycling, including enzymatic and non-enzymatic methods. However, the practical problems associated with the commercial application of coenzyme dependent biocatalysts have not yet been generally solved. Figure A8.18 illustrates the continuous production of L-amino adds in a multi-enzyme-membrane-reactor, where the enzymes together with NAD covalently bound to water soluble polyethylene glycol 20,000 (PEG-20,000-NAD) are retained by means of an ultrafiltration membrane. 

A large number of combinations are theoretically possible and a lot of these structures are actually used in practice. We know that nature makes use of this variety, e.g., to form cell membranes by phospholipids. However, in daily practice the pool of hydrophobic raw material for the production of anionic phosphorus-containing surfactants is survey able. 

In practice, estimation of Laq requires information on the rate of solute removal at the membrane since aqueous resistance is calculated from experimental data defining the solute concentration profile across this barrier [7], Mean /.aq values calculated from the product of aqueous diffusivity (at body temperature) and aqueous resistance obtained from human and animal intestinal perfusion experiments in situ are in the range of 100-900 pm, compared to lumenal radii of 0.2 cm (rat) and 1 cm (human). These estimates will necessarily be a function of perfusion flow rate and choice of solute. The lower Laq estimated in vivo is rationalized by better mixing within the lumen in the vicinity of the mucosal membrane [6],... 

Membrane-Enclosed Enzymatic Catalysis (MEEC) has been developed as a useful, practical new method for the manipulation of enzymes in organic synthesis. The enzyme in soluble form is enclosed in commercially available dialysis membranes. It combines the simplicity of use of soluble enzymes with certain of the advantages of immobilized enzymes. Containment permits separation of the enzyme from the reaction medium, straightforward separation of the product, and recovery of the enzyme for reuse [53],... 

Adsorptive separation is a powerful technology in industrial separations. In many cases, adsorption is the only technology available to separate products from industrial process streams when other conventional separation tools fail, such as distillation, absorption, membrane, crystallization and extraction. Itis also demonstrated that zeolites are unique as an adsorbent in adsorptive separation processes. This is because zeolites are crystalline soUds that are composed of many framework structures. Zeolites also have uniform pore openings, ion exchange abiUty and a variety of chemical compositions and crystal particle sizes. With the features mentioned, the degree of zeoUte adsorption is almost infinite. It is also noted that because of the unique characteristics of zeoHtes, such as various pore openings, chemical compositions and structures, many adsorption mechanisms are in existence and are practiced commercially. 

---