Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Mechanical properties polymer

Jacobsen, S. and Fritz, H.G. 1999. Plasticizing polylactide, the effect of different plasticizers on the mechanical properties. Polymer Engineering and Science 39 1303-1310. [Pg.38]

Shao, Z., Hu, X. W., Frische, S., and Vollrath, F. (1999). Heterogeneous morphology of Nephila edulis spider silk and its significance for mechanical properties. Polymer 40, 4709-4711. [Pg.50]

Bouajila, I, Limare, A., Joly, C., and Dole, P. (2005). Lignin plasticization to improve binderless fiberboard mechanical properties. Polym. Eng. Sci. 45(6), 809-816. [Pg.829]

F.S. Qureshi, M.B. Amin, A.G. Maadhah, and S.H. Hamid, Weather-induced degradation of linear low density polyethylene Mechanical properties. Polym. Plast. Tech. Eng., 28 (7 8), 649-662 (1989). [Pg.42]

In general, polymers have low stiffness and strength in comparison with other materials, e.g., metals and ceramics, and consequently these materials present serious difficulties in structural applications. To improve their mechanical properties, polymers are reinforced by the addition of rigid particles or fibers to form composite materials (1). Thus, polymer matrix composite materials are made up of a low modulus phase, the polymer matrix, and a high modulus phase, the reinforcement, which is usually carbon or glass. The modulus of the composite is higher than that of the polymer matrix, and the increment is proportional to the volume fraction of the reinforcement. In general, the properties of the composite depend not... [Pg.653]

Keywords mechanical properties, polymer mortar, unsaturated polyester resin, recycled PET, degree of unsaturation, glass transition temperature. [Pg.2]

J.M. Felix, P. Gatenholm, and H.P. Schreiber. Controlled interactions in cellulose-polymer composites. 1 effect on mechanical properties. Polym. Composites, 1993, 14(6), 449-457. [Pg.201]

Tanoue, S., Utracki, L. A., Garcia-Rejon, A., Tatibouet, J., and Kamal, M. R., Melt compounding of different grades of polystyrene with organoclay Part 3. Mechanical properties, Polym. Eng. ScL, 45, 827-837 (2005). [Pg.602]

Landry CJT, Coltrain BK, Brady BK. In situ polymerization of tetraethoxysilane in poly (methyl methacrylate) Morphology and dynamic mechanical properties. Polymer. 1992 33(7) 1486-1495. [Pg.1404]

Gopakumar, T. G., Ronrathnam, S., Lele, A., Rajan, C. R., and Fradet, A. 1999. In situ compatibilisation of poly(phenylene sulphide)/wholly aromatic thermotropic liquid crystalline polymer blends by reactive extrusion Morphology, thermal and mechanical properties. Polymer 357-364. [Pg.25]

Mechanical Properties. Polymers Polymer Composites, Vol.7, No.3, pp. 205-215 ISSN 0967-3911... [Pg.315]

Kolarik, J. Jancar, J. (1992). Ternary composites of polypropylene/elastomer/caldum carbonate effect of functionalized components on phase structure and mechanical properties. Polymer, vol.33, pp.4%1-4%7. ISSN 0032-3861... [Pg.355]

Raj R.G. Kokta B.V. Reinforcing high density polyethylene with cellulosic fibers I The effect of additives on fiber dispersion and mechanical properties. Polymer Engineering Science, vol. 31, No. 18, (1991), p>p. 1358-1362... [Pg.428]

Pun Pxmchaipetch, P., Ambrogi, V., Giamberini, M., Brostow, W., Cafagna, C., D Souza, N. A. Epoxy + liquid crystalline epoxy coreacted networks n. Mechanical properties. Polymer 43... [Pg.546]

Fra Francis, B., Thomas, S., Jose, J., Ramaswamy, R., Rao, V. L. Hydroxyl terminated poly (ether ether ketone) with pendent methyl group toughened epoxy resin miscibility, morphology and mechanical properties. Polymer 46 (2005) 12372-12385. [Pg.548]

Che Chen, C.-G., Justice, R. S., Schaefer, D. W., Baur, J. W. Highly dispersed nanosilica-epoxy resins with enhanced mechanical properties. Polymer 49 (2008) 3805-3815. [Pg.551]

Hosono N, Pitet LM, Palmans ARA, Meijer EW (2014) The effect of pendant benzene-1,3,5-tricarboxamides in the middle block of ABA triblock copolymers synthesis and mechanical properties. Polym Chem 5(4) 1463-1470... [Pg.91]

Zhou Z., Lai C., Zhang L., Qian Y, Hou H., Reneker D. H., and Fong H., Development of carbon nanofibers from aligned electrospun polyacrylonitrile nanofiber bundles and characterization of their microstructural, electrical, and mechanical properties. Polymer, 2009, 50,2999-3006. [Pg.260]

Mallakpour S, Zadehnazari A. One-pot synthesis of glucose functionalized multi-walled carbon nanotubes dispersion in hydrox-ylated poly(amide-imide) composites and their thermo-mechanical properties. Polymer 2013 54(23) 6329-38. [Pg.338]

Demirgbz D., Elvira C., Mano J.E, Cunha A.M., Piskin E., Reis R.L., Chemical modification of starch based biodegradable polymeric blends Effects on water uptake, degradation behaviour and mechanical properties, Polym Degrad Stab., 70, 2000,161-170. [Pg.341]

Kokta B.V., Raj R.G., Daneault C., Use of wood flour as filler in polypropylene Studies on mechanical properties, Polym. [Pg.417]

Shi, Y, Kashiwagi, T., Walters, R. N., Gilman, J. W., Lyon, R. E., and Sogah, D. Y. 2009. Ethylene vinyl acetate/layered silicate nanocomposites prepared by a surfactant-free method Enhanced flame retardant and mechanical properties. Polymer 50 3478-3487. [Pg.86]

Grosby, A. J. and Lee, J.-Y. 2007. Polymer nanocomposites The "nano" effect on mechanical properties. Polymer Reviews 47 217-229. [Pg.110]

Conza les-Montiel, A., Keskkula, H., and Paul, D. R. 1995. Impact-modified nylon 6/polypro-pylene blends 2. Effect of reactive functionality on morphology and mechanical properties. Polymer 36 4605-4620. [Pg.119]

Kim, D. H., Fasulo, P. D., Rodgers, W. R, and Paul, D. R. 2007. Effect of the ratio of maleated polypropylene to organoclay on the structure and properties of TPO-based nanocomposites. Part I Morphology and mechanical properties. Polymer 48 5960-5978. [Pg.124]

Reddy, C. S. and Das, C. K. 2006. Propylene-ethylene copolymer filled nanocomposites Influence of Zn-ion coating upon nano-SiOj on structural, thermal, and dynamic mechanical properties. Polymer-Plastics Technology and Engineering 45 815-820. [Pg.128]

Alexandre, M., Dubois, R, Sun, T., Garces, J. M., and Jerome, R. 2002. Rolyethylene-layered silicate nanocomposites prepared by the polymerization-filling technique S5mthesis and mechanical properties. Polymer 43 2123-2132. [Pg.181]

Jansson A, Moller K, Gevert T. Degradation of post-consumer polypropylene materials exposed to simulated recycling— mechanical properties. Polym Degrad Stab 2003 82 (l) 37-46. [Pg.289]

Semadeni M, Zerlik H, Rossini P, Meyer J, Wintermantel E, High fibre volume fraction injection moulding of carbon fibre reinforced polyetheretherketone (PEEK) in order to raise mechanical properties, Polym Polym Composites, 6(5), 279-286, 1998. [Pg.548]

H. Li, P. Zadorecki, and P. Flodin, Cellulose fiber-polyester composites with reduced water sensitivity (1)—chemical treatment and mechanical properties. Polym. Compos. 8, 199-202(1987). [Pg.472]

Carrasco, E., Pages, P., Gamez-Perez, J., Santana, O.O., Maspoch, M.L. Processing of poly (lactic acid) Characterization of chemical structure, thermal stability and mechanical properties. Polym. Degrad. Stab. 95, 116-125 (2010)... [Pg.16]


See other pages where Mechanical properties polymer is mentioned: [Pg.52]    [Pg.295]    [Pg.296]    [Pg.604]    [Pg.392]    [Pg.38]    [Pg.165]    [Pg.47]    [Pg.124]    [Pg.203]    [Pg.391]    [Pg.939]    [Pg.476]    [Pg.388]   
See also in sourсe #XX -- [ Pg.224 , Pg.238 ]

See also in sourсe #XX -- [ Pg.62 ]

See also in sourсe #XX -- [ Pg.7 , Pg.8 ]

See also in sourсe #XX -- [ Pg.4 ]




SEARCH



Polymer mechanical

Polymer mechanism

© 2024 chempedia.info