Mechanical adhesive joints

The path of failure of an adhesive joint can give information about the mechanism of failure if analysis of the elemental and chemical composition can be conducted along the path. Several authors have performed such analyses by loading the adhesive joint until it fractures and then using XPS to analyze each side of the fracture. 

Usually tj/ is very much larger than Fq. This is why practical fracture energies for adhesive joints are almost always orders of magnitude greater than works of adhesion or cohesion. However, a modest increase in Fq may result in a large increase in adhesion as and Fo are usually coupled. For some mechanically simple systems where is largely associated with viscoelastic loss, a multiplicative relation has been found ... 

Some rubber base adhesives need vulcanization to produce adequate ultimate strength. The adhesion is mainly due to chemical interactions at the interface. Other rubber base adhesives (contact adhesives) do not necessarily need vulcanization but rather adequate formulation to produce adhesive joints, mainly with porous substrates. In this case, the mechanism of diffusion dominates their adhesion properties. Consequently, the properties of the elastomeric adhesives depend on both the variety of intrinsic properties in natural and synthetic elastomers, and the modifying additives which may be incorporated into the adhesive formulation (tackifiers, reinforcing resins, fillers, plasticizers, curing agents, etc.). 

Pure PDMS networks are mechanically weak and do not satisfy the adhesive and cohesive requirements needed for most applications in which the silicone adhesive joint is subjected to various stresses. For crosslinked silicones to become high performing adhesives, they need to be strengthened. 

Pastor-Bias M.M., Martfn-Martfnez J.M., and Boerio F.J., 2002, Mechanisms of adhesion in surface chlorinated thermoplastic rubber/thermoplastic pol3uirethane adhesive joints. Rubber Chem. Technol., 75(5), 825-837. 

A surface is that part of an object which is in direct contact with its environment and hence, is most affected by it. The surface properties of solid organic polymers have a strong impact on many, if not most, of their apphcations. The properties and structure of these surfaces are, therefore, of utmost importance. The chemical stmcture and thermodynamic state of polymer surfaces are important factors that determine many of their practical characteristics. Examples of properties affected by polymer surface stmcture include adhesion, wettability, friction, coatability, permeability, dyeabil-ity, gloss, corrosion, surface electrostatic charging, cellular recognition, and biocompatibility. Interfacial characteristics of polymer systems control the domain size and the stability of polymer-polymer dispersions, adhesive strength of laminates and composites, cohesive strength of polymer blends, mechanical properties of adhesive joints, etc. 

Effects of Corrosive Environments on the Locus and Mechanism of Failure of Adhesive Joints... 

Although numerous studies (1-3) have described work aimed at establishing criteria for the durability of adhesive joints, a thorough understanding of effects of the chemical and mechanical properties, on the durability of adhesive bonds is lacking. More specifically, the effects of surface preparation and dynamic loading, especially under environmental service conditions, has not been explored in detail for automotive structures. In this paper, a description of the effects of environment on the durability of adhesive bonds is presented. Particular attention is given to... 

Over the last decade advances have occurred very rapidly in the area identified as composite materials. In general, a composite material is the combination of any two or more materials, one of which has superior mechanical properties but is in a difficult to use form (e.g. fiber, powder, etc.). The superior component is usually the reinforcement while the other component serves as the matrix in which the reinforcement is dispersed. The resultant composite is a material whose properties are near those of the reinforcement element but in a form which can be easily handled and can easily function as a structural element. Included in this definition are all of the reinforced materials including particulate, fiber, flake and sheet reinforcements. Adhesive joints for, example, would be a planar or two dimensional composite 1). 

Mechanism of the Formation of an Adhesive Joint in Living Tissues. . . . . 77... 

VII. The physico-chemical and mechanical properties of the adhesion joint should correspond to the given surgical situation wherein the adhesive is used. 

The fine porous structure of the adhesive joint causes an early degradation by the cellular mechanism. For KL-3, under experimental conditions, the cellular mechanism of degradation manifests itself two weeks later. Intensive degradation of the adhesive by the hydrolytic mechanism is due to the highly expanded surface under formation of cavities and subsequently of gigantic cells of foreign bodies. 

---