Liquid crystal polymers phases

Typical textures of liquid crystal polymer phases... 

We are all familiar with tire tliree states of matter gases, liquids and solids. In tire 19tli century the liquid crystal state was discovered [1 and 2] tliis can be considered as tire fourtli state of matter [3].The essential features and properties of liquid crystal phases and tlieir relation to molecular stmcture are discussed here. Liquid crystals are encountered in liquid crystal displays (LCDs) in digital watches and otlier electronic equipment. Such applications are also considered later in tliis section. Surfactants and lipids fonn various types of liquid crystal phase but this is discussed in section C2.3. This section focuses on low-molecular-weight liquid crystals, polymer liquid crystals being discussed in tire previous section. 

Liquid crystal polymers are also used in electrooptic displays. Side-chain polymers are quite suitable for this purpose, but usually involve much larger elastic and viscous constants, which slow the response of the device (33). The chiral smectic C phase is perhaps best suited for a polymer field effect device. The abiHty to attach dichroic or fluorescent dyes as a proportion of the side groups opens the door to appHcations not easily achieved with low molecular weight Hquid crystals. Polymers with smectic phases have also been used to create laser writable devices (30). The laser can address areas a few micrometers wide, changing a clear state to a strong scattering state or vice versa. Future uses of Hquid crystal polymers may include data storage devices. Polymers with nonlinear optical properties may also become important for device appHcations. 

To produce novel LC phase behavior and properties, a variety of polymer/LC composites have been developed. These include systems which employ liquid crystal polymers (5), phase separation of LC droplets in polymer dispersed liquid crystals (PDLCs) (4), incorporating both nematic (5,6) and ferroelectric liquid crystals (6-10). Polymer/LC gels have also been studied which are formed by the polymerization of small amounts of monomer solutes in a liquid crystalline solvent (11). The polymer/LC gel systems are of particular interest, rendering bistable chiral nematic devices (12) and polymer stabilized ferroelectric liquid crystals (PSFLCs) (1,13), which combine fast electro-optic response (14) with the increased mechanical stabilization imparted by the polymer (75). 

Liquid crystal phases, 15 100 Liquid-crystal polyesters (LCPs), 10 191-192 20 38-39 manufacture of, 20 44-45 Liquid-crystal polymers (LCPs), 15 110 20 3, 78-86, 398. See also Liquid crystalline polymers (LCPs) advantages of, 20 81... 

Under certain conditions, stiff rod-like helical polymers can spontaneously form lyotropic or thermotropic cholesteric liquid crystal (TChLC) phases. 

It is the intent of this doeument to define the terms most commonly encountered in the field of polymer blends and eomposites. The scope has been limited to mixtures in which the eomponents differ in ehemical composition or molar mass or both and in which the continuous phase is polymeric. Many of the materials described by the term multiphase are two-phase systems that may show a multitude of finely dispersed phase domains. Hence, incidental thermodynamic descriptions are mainly limited to binary mixtures, although they can be and, in the scientific literature, have been generalized to multicomponent mixtures. Crystalline polymers and liquid-crystal polymers have been considered in other documents [1,2] and are not discussed here. 

Liquid crystal polymers having 1,3-dithiane or 1,3-oxathiane rings as mesogenic side groups exhibit the extremely important liquid crystal phase at around room temperature <1999MI335>. 1,3-Oxathianes have also been applied as perfumery and flavoring ingredients other derivatives exhibit excellent herbicidal activity and 1,3-oxathiane derivatives have been employed as corrosion inhibitors for steel. 

No coherent threadline could be maintained and the extmdate flew off the windup as short, brittle, crystalline lengths. Not until many years later did other workers show that this polymer on cooling exhibits a mesophase transition directly from the isotropic melt to a smectic A phase. Good sources of information on liquid crystals and liquid crystal polymers are available (212—216). 

The systematic synthesis of non amphiphilic l.c.-side chain polymers and detailed physico-chemical investigations are discussed. The phase behavior and structure ofnematic, cholesteric and smectic polymers are described. Their optical properties and the state of order of cholesteric and nematic polymers are analysed in comparison to conventional low molar mass liquid crystals. The phase transition into the glassy state and optical characterization of the anisotropic glasses having liquid crystalline structures are examined. 

For polymers which, on heating, yield Mesophases (liquid crystal melts), the so-called mesogenic polymers or liquid crystal polymers (LCPs), the situation of phase transitions is much more complex. In this case the simple Volume-Temperature diagram, given in Fig. 4.2 is not valid anymore and has to be substituted by a more complicated one, which is shown in Fig. 6.12. 

Another saturated tetrahydrofuryl core has found application as a component of liquid crystals. Cholesteric liquid crystal polymers are useful as photostable UV filters in cosmetic and pharmaceutical preparations for the protection of human epidermis and hair against UV radiation, especially in the range 280-450nm <2000DEP19848130>. Fused bifuran 81 is a suitable monomer for the preparation of these desired polymers as it contains the requisite characteristics of having more than one chiral, bifunctional subunit type which is capable of forming a cholesteric liquid crystal phase with a pitch of <450 nm. It also contains an achiral aromatic or cycloaliphatic hydroxyl or amino carboxylic acid subunit, achiral aromatic or cycloaliphatic dicarboxylic acids, and/or achiral aromatic or cycloaliphatic diols or diamines. Polymers prepared from suitable monomers, such as diol 81, can also be used as UV reflectors, UV stabilizers, and multilayer pigments. 

It was, however, observed that such systems under appropriate conditions of concentration, solvent, molecular weight, temperature, etc. form a liquid crystalline solution. Perhaps a little digression is in order here to say a few words about liquid crystals. A liquid crystal has a structure intermediate between a three-dimensionally ordered crystal and a disordered isotropic liquid. There are two main classes of liquid crystals lyotropic and thermotropic. Lyotropic liquid crystals are obtained from low viscosity polymer solutions in a critical concentration range while thermotropic liquid crystals are obtained from polymer melts where a low viscosity phase forms over a certain temperature range. Aromatic polyamides and aramid type fibers are lyotropic liquid crystal polymers. These polymers have a melting point that is high and close to their decomposition temperature. One must therefore spin these from a solution in an appropriate solvent such as sulfuric acid. Aromatic polyesters, on the other hand, are thermotropic liquid crystal polymers. These can be injection molded, extruded or melt spun. 

The living ROMP reactions of norbomene and norbomene derivatives have been used to make a variety of polymers possessing unusual properties. Copolymerization of selected fimctionalized norbomenes with norbomene has been used to synthesize star polymers and side-chain liquid crystal polymers. This chemistry has also resulted in the preparation of phase separated block copolymers that contain uniform sized metal or semiconductor nanoparticles. The... 

By analogy with small molecule liquid crystals, where the type of liquid crystal formed is used as a test for miscibility, it is expected that all polymer molecules that form the same type of liquid crystalline phase will be miscible (4). This is in contrast to more traditional polymers where miscibility is the exception rather than the rule. The present work will suggest which of these concepts is applicable to liquid crystal polymer blend systems. 

Figure 8. Ternary phase diagram of a liquid crystal, polymer, solvent mixture.

---