Thermal ionization mass spectrometry, lead isotope analysis

Table 1. Lead contamination blanks for serum collection, processing, and analysis by isotope dilution thermal ionization mass spectrometry in the WIGS Trace Metal/Mass Spectrometry facihty. University of California, Santa Cruz. Lead values are based upon repeated measurements.

Lead curse tablets from Roman Carthage contain variable amounts of very small metallic inclusions. Electron microprobe analysis confirmed these metallic inclusions were bronze, brass, and a Sn-Sb alloy. This was interpreted as possible evidence of lead metal recycling. Six samples were chosen to represent a range of tablets containing the minimum to the maximum number of inclusions. Thermal ionization mass spectrometry of the Pb isotopes in the curse tablets appear to define a mixing line, with the tablets containing the least number of inclusions plotting closest to the Tunisian lead ore isotope ratios. 

A.D. were found in old mines, and sizable slag deposits suggest at least some level of lead exploitation during Roman times (2). By the careful selection of Roman lead artifacts likely to have been manufactured in Carthage, and the use of lead isotope analysis, it may be possible to confirm the use of Tunisian lead ores during the Roman period. In this preliminary study, analysis of 22 curse tablets by electron microprobe analysis (EMPA) and six tablets by thermal ionization mass spectrometry (TIMS) suggest that these artifacts might be used to better understand Roman lead use and trade. 

Thermal ionization mass spectrometry (TIMS) has been the technique of choice in most lead and strontium isotope ratio studies. TIMS is a bulk technique, where samples are powdered and concentrated prior to analysis. This bulk technique has two negative features. First, processing of samples is time-consuming and requires additional laboratory equipment. Second, the samples must be homogeneous. This aspect of TIMS is problematic in samples where small-scale compositional vari-... 

Spark source (SSMS) and thermal emission (TEMS) mass spectrometry are used to determine ppb to ppm quantities of elements in energy sources such as coal, fuel oil, and gasoline. Toxic metals—cadmium, mercury, lead, and zinc— may be determined by SSMS with an estimated precision of 5%, and metals which ionize thermally may be determined by TEMS with an estimated precision of 1% using the isotope dilution technique. An environmental study of the trace element balance from a coal-fired steam plant was done by SSMS using isotope dilution to determine the toxic metals and a general scan technique for 15 other elements using chemically determined iron as an internal standard. In addition, isotope dilution procedures for the analysis of lead in gasoline and uranium in coal and fly ash by TEMS are presented. 

---