Lasers nitrogen

Light pulses with halfwidths of 10" sec have been generated mainly by Q-switched solid-state lasers but can be obtained principally with all high-gain laser transitions, as for instance CO2 lasers " ), nitrogen lasers ) (X = 3300 A), or dye lasers ). 

Another common laser class is that of gas lasers, which includes helium neon (HeNe) lasers, carbon dioxide (CO2) lasers, nitrogen lasers, and so on. The helium neon laser, widely used until the advent of the diode laser, was one of the first types developed and commercialized. As described above, it is a discharge-pumped gas laser, which generally produces an output measuring a few mW in power. 

Figure 2. Schematic drawing of a sample assemblage in the diamond cell. The sample is heated with a CO2 laser. Nitrogen is used as a pressure medium in experiments on nitrides to preclude decomposition. Argon is used as a pressure medium when chemically inert conditions are required. Fluorescence of ruby crystals is excited using an Ar laser.

Figure C3.3.5 shows typical data obtained from experimental studies of tlie type described above, where tlie hot donor is tlie nitrogen heterocycle pyrazine, C Fl N, initially excited by an excinier laser to an energy of 40 640...

The method of excitation was, in the early days, by an electron beam but now a transverse electrical discharge, like that for the nitrogen laser shown in Figure 9.14, is used. Indeed such an excimer laser can be converted to a nitrogen laser by changing the gas. 

The excimer laser radiation is pulsed with a typical maximum rate of about 200 FIz. Peak power of up to 5 MW is high compared with that of a nitrogen laser. 

Fluorine reacts with ammonia in the presence of ammonium acid fluoride to give nitrogen trifluoride, NF. This compound can be used as a fluorine source in the high power hydrogen fluoride—deuterium fluoride (HF/DF) chemical lasers and in the production of microelectronic siUcon-based components. 

Laser isotope separation techniques have been demonstrated for many elements, including hydrogen, boron, carbon, nitrogen, oxygen, sHicon, sulfur, chlorine, titanium, selenium, bromine, molybdenum, barium, osmium, mercury, and some of the rare-earth elements. The most significant separation involves uranium, separating uranium-235 [15117-96-1], from uranium-238 [7440-61-1], (see Uranium and uranium compounds). The... 

The reactants ate fed into the tail flame of a d-c nitrogen plasma. The reaction occurs rapidly at temperatures around 1500°C and the HCl reacts with excess ammonia to form ammonium chloride. Similar reactions have been carried out using furnaces, lasers, and r-f plasmas (34) as the source of heat. Other routes using titanium tetrachloride starting material include... 

Electrical and Electronic Applications. Silver neodecanoate [62804-19-7] has been used in the preparation of a capacitor-end termination composition (110), lead and stannous neodecanoate have been used in circuit-board fabrication (111), and stannous neodecanoate has been used to form patterned semiconductive tin oxide films (112). The silver salt has also been used in the preparation of ceramic superconductors (113). Neodecanoate salts of barium, copper, yttrium, and europium have been used to prepare superconducting films and patterned thin-fHm superconductors. To prepare these materials, the metal salts are deposited on a substrate, then decomposed by heat to give the thin film (114—116) or by a focused beam (electron, ion, or laser) to give the patterned thin film (117,118). The resulting films exhibit superconductivity above Hquid nitrogen temperatures. 

Reaction with vatious nucleophilic reagents provides several types of dyes. Those with simple chromophores include the hernicyanine iodide [16384-23-9] (20) in which one of the terminal nitrogens is nonheterocyclic enamine triearbocyanine iodide [16384-24-0] (21) useful as a laser dye and the merocyanine [32634-47-2] (22). More complex polynuclear dyes from reagents with more than one reactive site include the trinuclear BAB (Basic-Acidic-Basic) dye [66037-42-1] (23) containing basic-acidic-basic heterocycles. Indolizinium quaternary salts (24), derived from reaction of diphenylcyclopropenone [886-38-4] and 4-picoline [108-89-4] provide trimethine dyes such as (25), which absorb near 950 nm in the infrared (23). 

Because Raman spectroscopy requires one only to guide a laser beam to the sample and extract a scattered beam, the technique is easily adaptable to measurements as a function of temperature and pressure. High temperatures can be achieved by using a small furnace built into the sample compartment. Low temperatures, easily to 78 K (liquid nitrogen) and with some diflSculty to 4.2 K (liquid helium), can be achieved with various commercially available cryostats. Chambers suitable for Raman spectroscopy to pressures of a few hundred MPa can be constructed using sapphire windows for the laser and scattered beams. However, Raman spectroscopy is the characterizadon tool of choice in diamond-anvil high-pressure cells, which produce pressures well in excess of 100 GPa. ... 

The atom probe field-ion microscope (APFIM) and its subsequent developments, the position-sensitive atom probe (POSAP) and the pulsed laser atom probe (PLAP), have the ultimate sensitivity in compositional analysis (i.e. single atoms). FIM is purely an imaging technique in which the specimen in the form of a needle with a very fine point (radius 10-100 nm) is at low temperature (liquid nitrogen or helium) and surrounded by a noble gas (He, Ne, or Ar) at 10 -10 Pa. A fluorescent screen or a... 

---