Ketones phosphines

In a recent example metalloporphyrins are used as the sensing dyes for a wide variety of odorants, including alcohols, amines, arenes, ethers, halocarbons, ketones, phosphines, thioethers and thiols. An array of four different metalloporphyrins are placed on a substrate and exposed to the vapours for 30 s. The various vapour molecules coordinate onto the central metal atoms of the porphyrins, causing them to change colour and producing a unique four-colour array. The resulting colour array is compared with a library of known chemicals or mixtures and identification is achieved. 

The sensor array responses were determined for a series of different volatiles representing the common organic functionalities amines, arenes, alcohols, aldehydes, carboxylic acids, esters, halocarbons, ketones, phosphines, sulfides, and thiols. Each analyte response is represented as the red, green, and blue values of each of the 24 dyes, that is, a 72-dimensional vector. These results suggest that the familial similarities among compounds of the same functionality are exceptional amines, alcohols, aldehydes, esters, and so forth are all easily distinguished from each other. 

Polyarylenester ketone phosphine oxide compositions incorporation cycloaliphatic units for use as polymeric binders in thermal control coatings and method for synthesizing same, US Patent 7208551 International Patent Catalogue C 08 L 45/00-216. 

All four tetrahalides of tin form addition compounds with certain electron donors (L), such as amines, cyanides, ethers, sulphides, ketones, phosphines, arsines, xhe most... 

The problem of the synthesis of highly substituted olefins from ketones according to this principle was solved by D.H.R. Barton. The ketones are first connected to azines by hydrazine and secondly treated with hydrogen sulfide to yield 1,3,4-thiadiazolidines. In this heterocycle the substituents of the prospective olefin are too far from each other to produce problems. Mild oxidation of the hydrazine nitrogens produces d -l,3,4-thiadiazolines. The decisive step of carbon-carbon bond formation is achieved in a thermal reaction a nitrogen molecule is cleaved off and the biradical formed recombines immediately since its two reactive centers are hold together by the sulfur atom. The thiirane (episulfide) can be finally desulfurized by phosphines or phosphites, and the desired olefin is formed. With very large substituents the 1,3,4-thiadiazolidines do not form with hydrazine. In such cases, however, direct thiadiazoline formation from thiones and diazo compounds is often possible, or a thermal reaction between alkylideneazinophosphoranes and thiones may be successful (D.H.R. Barton, 1972, 1974, 1975). 

On the other hand, the halohydrin (chloro and bromo) 908 is converted into a ketone via oxidative addition and //-elimination in boiling benzene with catalysis by Pd(OAc)2 and tri(o-tolyl)phosphine in the presence of K2C03[765,766],... 

Many of these reactions are reversible, and for the stronger nucleophiles they usually proceed the fastest. Typical examples are the addition of ammonia, amines, phosphines, and bisulfite. Alkaline conditions permit the addition of mercaptans, sulfides, ketones, nitroalkanes, and alcohols to acrylamide. Good examples of alcohol reactions are those involving polymeric alcohols such as poly(vinyl alcohol), cellulose, and starch. The alkaline conditions employed with these reactions result in partial hydrolysis of the amide, yielding mixed carbamojdethyl and carboxyethyl products. 

In general, peroxomonosulfates have fewer uses in organic chemistry than peroxodisulfates. However, the triple salt is used for oxidizing ketones (qv) to dioxiranes (7) (71,72), which in turn are useful oxidants in organic chemistry. Acetone in water is oxidized by triple salt to dimethyldioxirane, which in turn oxidizes alkenes to epoxides, polycycHc aromatic hydrocarbons to oxides and diones, amines to nitro compounds, sulfides to sulfoxides, phosphines to phosphine oxides, and alkanes to alcohols or carbonyl compounds. 

Hydroxyall l Hydroperoxyall l Peroxides. There is evidence that hydroxyalkyl hydroperoxyalkyl peroxides (2, X = OH, Y = OOH) exist in equihbrium with their corresponding carbonyl compounds and other a-oxygen-substituted peroxides. For example, reaction with acyl haUdes yields diperoxyesters. Dilute acid hydrolysis yields the corresponding ketone (44). Reduction with phosphines yields di(hydroxyalkyl) peroxides and dehydration results in formation of cycHc diperoxides (4). 

If aromatic aldehydes or ketones are used, the tertiary phosphine product sometimes rearranges to a mixed phosphine oxide. 

Phosphine oxides may be prepared by the acid-cataly2ed reaction of phosphine with carbonyl compounds such as ketones (94). 

Because of their relative instabiUty, primary phosphine oxides caimot be isolated and must be converted direcdy to derivatives. Primary and secondary phosphine oxides undergo reactions characteristic of the presence of P—H bonds, eg, the base-cataly2ed nucleophilic addition to unsaturated compounds such as olefins, ketones, and isocyanates (95). 

A phosphine oxide of type (41) can be coupled with Gmndman s ketone (42) to produce the skeleton (105,144—151). 

Much better known are the fluonnatedphosphoranes, which have been widely used m the Wittig reaction for the preparation of fluoroolefms Difluoromethylena tion reactions have been effected by using a variety of conditions Treatment of dibromodifluoromethane with two equivalents of tns(dimethylammo)phosphine m carefully dried tnglyme yields a solution of bromodifluoromethylphosphonium broomide, which very effectively converts ketones to difluoromethylene derivatives A more sensitive reagent is prepared by the addihon of two equivalents of the phosphine to the reaction mixture of fluorohalomethane and a carbonyl compound [39, 40] (equation 40) (Table 14)... 

Codeposition of silver vapor with perfluoroalkyl iodides at -196 °C provides an alternative route to nonsolvated primary perfluoroalkylsilvers [272] Phosphine complexes of trifluaromethylsilver are formed from the reaction of trimethyl-phosphme, silver acetate, and bis(trifluoromethyl)cadmium glyme [755] The per-fluoroalkylsilver compounds react with halogens [270], carbon dioxide [274], allyl halides [270, 274], mineral acids and water [275], and nitrosyl chloride [276] to give the expected products Oxidation with dioxygen gives ketones [270] or acyl halides [270] Sulfur reacts via insertion of sulfur into the carbon-silver bond [270] (equation 188)... 

It has been reported by Burgada (I09a) that highly enolized ketones form enamines when they are treated with tris[dimethylamino]phosphine. Only condensation products are formed when slightly enolized ketones are treated with this reagent. 

Bis(l-methylimidazol-2-yl)methane and -ketone with the dimer [Rh(CO)2Cl]2 in the presence of sodium tetraphenylborate give the dicarbonyl complexes 68 (X CHj, CO L = CO) where the carbonyl ligands may easily be substituted by the triphenyl phosphine ligands to yield 68 (X = CH, CO L = PPh ) (99JOM(588)69). The bis(l-methylbenzimidazol-2-yl)methane analogs of 68 (X=CH2 L=C0, PPhj) can be prepared similarly. 

In a more recent publication the same group mentions that Ag(I) salts in combination with chiral phosphine ligands can catalyze the 1,3-dipolar cycloaddition involving the azomethine precursor 64b and methyl vinyl ketone (Scheme 6.43) [87]. The reaction, which presumably also required a stoichiometric amount of the catalyst, proceeds to give 65b in a good yield with 70% ee. 

Apart from tertiary amines, the reaction may be catalyzed by phosphines, e.g. tri- -butylphosphine or by diethylaluminium iodide." When a chiral catalyst, such as quinuclidin-3-ol 8 is used in enantiomerically enriched form, an asymmetric Baylis-Hillman reaction is possible. In the reaction of ethyl vinyl ketone with an aromatic aldehyde in the presence of one enantiomer of a chiral 3-(hydroxybenzyl)-pyrrolizidine as base, the coupling product has been obtained in enantiomeric excess of up to 70%, e.g. 11 from 9 - -10 ... 

The reaction of an alkylidene phosphorane 1 (i.e. a phosphorus ylide) with an aldehyde or ketone 2 to yield an alkene 3 (i.e. an olefin) and a phosphine oxide 4, is called the Wittig reaction or Wittig olefination reaction. ... 

The initial step of olefin formation is a nucleophilic addition of the negatively polarized ylide carbon center (see the resonance structure 1 above) to the carbonyl carbon center of an aldehyde or ketone. A betain 8 is thus formed, which can cyclize to give the oxaphosphetane 9 as an intermediate. The latter decomposes to yield a trisubstituted phosphine oxide 4—e.g. triphenylphosphine oxide (with R = Ph) and an alkene 3. The driving force for that reaction is the formation of the strong double bond between phosphorus and oxygen ... 

Buchwtild and co-workers have developed highly aedve cattilysts consisting of bulky, electron-rich phosphine ligands v/ith a biphenyl backbone combined v/ith PdfOAci for the aryladon of ketones or niiroalkanes fEq 5 73 ... 

Guo et al. [70,71,73] recently attempted to hydrogenate NBR in emulsion form using Ru-PCy complexes. However, successful hydrogenation can only be obtained when the emulsion is dissolved in a ketone solvent (2-butanone). A variety of Ru-phosphine complexes have been studied. Crosslinking of the polymer could not be avoided during the reaction. The use of carboxylic acids or first row transition metal salts as additives minimized the gel formation. The reactions under these conditions require a very high catalyst concentration for a desirable rate of hydrogenation. 

---