Ketenes acids

The chemistry of iron vinylidene complexes is dominated by the electrophilicity of the carbon atom adjacent to the iron organometallic unit. While addition of water leads to an acyl complex (i.e., the reverse of the dehydration shown in equation 10), addition of an alcohol leads to a vinyl ether complex. Similarly, other iron vinyl complexes can be prepared by the addition of thiolate, hydride, or an organocuprate (Scheme 33). " The nucleophilic addition of imines gave enaminoiron intermediates that could be further elaborated into cyclic aminocarbenes. This methodology has been used to provide access to /3-lactams and ultimately penicillin analogs, and good diastereoselectivities were observed (6 1-15 1) (Scheme 34). 04 Iso, vinylidene complexes are intermediates in cyclizations of alkynyl irons with substituted ketenes, acid chlorides, and related electrophiles an example is shown (equation 11). These cyclizations led to the formation of a series of isolable and characterizable cyclic vinyl iron complexes. 

Andraos, J. and Kresge, A.J., Flash Photolytic Generation and Study of Ketenes Acid-Catalyzed Hydration in Aqueous Solution, J. Photochem. Photobiol, A Chem., 57,165, 1991. 

Homogeneous catalysts. With a homogeneous catalyst, the reaction proceeds entirely in the vapor or liquid phase. The catalyst may modify the reaction mechanism by participation in the reaction but is regenerated in a subsequent step. The catalyst is then free to promote further reaction. An example of such a homogeneous catalytic reaction is the production of acetic anhydride. In the first stage of the process, acetic acid is pyrolyzed to ketene in the gas phase at TOO C ... 

Figure 14.8a shows a simplified flowsheet for the manufacture of acetic anhydride as presented by Jeffries. Acetone feed is cracked in a furnace to ketene and the byproduct methane. The methane is used as furnace fuel. A second reactor forms acetic anhydride by the reaction between ketene from the first reaction and acetic acid. 

By the action of keten, CHjCO, upon acida with acetic acid ... 

With higher aliphatic acids, RCOOH, keten yields first a mixed anhydride CH3COOCOR, which can be distilled under reduced pressure by slow distillation at atmospheric pressure the mixed anhydride undergoes rearrangement into the anhydride of the higher fatty acid and acetic acid, for example ... 

The mechanism of the reaction probably involves the production of bivalent carbon during the initial loss of nitrogen the group R shifte from an adjacent position to this carbon leading to the production of a keten the latter then reacts with the solvent to give an acid, an amide or an ester. 

Lewis acid promoted condensation of silyl ketene acetals (ester enolate equiv.) with aldehydes proceeds via "open" transition state to give anti aldols starting from either E- or Z- enolates. 

A more eflicient and general synthetic procedure is the Masamune reaction of aldehydes with boron enolates of chiral a-silyloxy ketones. A double asymmetric induction generates two new chiral centres with enantioselectivities > 99%. It is again explained by a chair-like six-centre transition state. The repulsive interactions of the bulky cyclohexyl group with the vinylic hydrogen and the boron ligands dictate the approach of the enolate to the aldehyde (S. Masamune, 1981 A). The fi-hydroxy-x-methyl ketones obtained are pure threo products (threo = threose- or threonine-like Fischer formula also termed syn" = planar zig-zag chain with substituents on one side), and the reaction has successfully been applied to macrolide syntheses (S. Masamune, 1981 B). Optically pure threo (= syn") 8-hydroxy-a-methyl carboxylic acids are obtained by desilylation and periodate oxidation (S. Masamune, 1981 A). Chiral 0-((S)-trans-2,5-dimethyl-l-borolanyl) ketene thioketals giving pure erythro (= anti ) diastereomers have also been developed by S. Masamune (1986). 

Silyl enol ethers are other ketone or aldehyde enolate equivalents and react with allyl carbonate to give allyl ketones or aldehydes 13,300. The transme-tallation of the 7r-allylpalladium methoxide, formed from allyl alkyl carbonate, with the silyl enol ether 464 forms the palladium enolate 465, which undergoes reductive elimination to afford the allyl ketone or aldehyde 466. For this reaction, neither fluoride anion nor a Lewis acid is necessary for the activation of silyl enol ethers. The reaction also proceed.s with metallic Pd supported on silica by a special method[301j. The ketene silyl acetal 467 derived from esters or lactones also reacts with allyl carbonates, affording allylated esters or lactones by using dppe as a ligand[302]... 

KETENES, KETENE DITffiRS AND RELATED SUBSTANCES] (Vol 14) py-n-Octadecyloxy-3ymtrodiphenyl-p-carboxylic acid [21351-71-3]... 

Decomposition Reactions. Minute traces of acetic anhydride are formed when very dry acetic acid is distilled. Without a catalyst, equiUbrium is reached after about 7 h of boiling, but a trace of acid catalyst produces equiUbrium in 20 min. At equiUbrium, about 4.2 mmol of anhydride is present per bter of acetic acid, even at temperatures as low as 80°C (17). Thermolysis of acetic acid occurs at 442°C and 101.3 kPa (1 atm), leading by parallel pathways to methane [72-82-8] and carbon dioxide [124-38-9] and to ketene [463-51-4] and water (18). Both reactions have great industrial significance. 

First prepared by C. F. Gerhardt from ben2oyl chloride and carefully dried potassium acetate (1), acetic anhydride is a symmetrical iatermolecular anhydride of acetic acid the iatramolecular anhydride is ketene [463-51-4]. Benzoic acetic anhydride [2819-08-1] undergoes exchange upon distillation to yield benzoic anhydride [93-97-0] and acetic anhydride. 

The second step is the Hquid-phase ketene and acetic acid reaction... 

Acetone cracks to ketene, and may then be converted to anhydride by reaction with acetic acid. This process consumes somewhat less energy and is a popular subject for chemical engineering problems (24,25). The cost of acetone works against widespread appHcation of this process, however. 

Ketene can be obtained by reaction of carbon oxides with ethylene (53). Because ketene combines readily with acetic acid, forming anhydride, this route may have practical appHcations. Litde is known about the engineering possibiHties of these reactions. 

Anhydride manufactured by acetic acid pyrolysis sometimes contains ketene polymers, eg, acetylacetone, diketene, dehydroacetic acid, and particulate carbon, or soot, is occasionally encountered. Polymers of aHene, or its equilibrium mixture, methylacetylene—aHene, are reactive and refractory impurities, which if exposed to air, slowly autoxidize to dangerous peroxidic compounds. 

Chloroacetyl chloride is manufactured by reaction of chloroacetic acid with chlorinating agents such as phosphoms oxychloride, phosphoms trichloride, sulfuryl chloride, or phosgene (42—44). Various catalysts have been used to promote the reaction. Chloroacetyl chloride is also produced by chlorination of acetyl chloride (45—47), the oxidation of 1,1-dichloroethene (48,49), and the addition of chlorine to ketene (50,51). Dichloroacetyl and trichloroacetyl chloride are produced by oxidation of trichloroethylene or tetrachloroethylene, respectively. 

Rea.ctlons, As with other tertiary alcohols, esterification with carboxyUc acids is difficult and esters are prepared with anhydrides (181), acid chlorides (182), or ketene (183). Carbamic esters may be prepared by treatment with an isocyanate (184) or with phosgene followed by ammonia or an amine (185). 

Ketene Process. The ketene process based on acetic acid or acetone as the raw material was developed by B. F. Goodrich (81) and Celanese (82). It is no longer used commercially because the intermediate P-propiolactone is suspected to be a carcinogen (83). In addition, it cannot compete with the improved propylene oxidation process (see Ketenes, ketene dimers, and related substances). 

Ketone Synthesis. In the Friedel-Crafts ketone synthesis, an acyl group is iatroduced iato the aromatic nucleus by an acylating agent such as an acyl haUde, acid anhydride, ester, or the acid itself. Ketenes, amides, and nittiles also may be used aluminum chloride and boron ttitiuotide are the most common catalysts (see Ketones). 

P-Hydroxy acids lose water, especially in the presence of an acid catalyst, to give a,P-unsaturated acids, and frequendy P,y-unsaturated acids. P-Hydroxy acids do not form lactones readily because of the difficulty of four-membered ring formation. The simplest P-lactone, P-propiolactone, can be made from ketene and formaldehyde in the presence of methyl borate but not from P-hydroxypropionic acid. P-Propiolactone [57-57-8] is a usehil intermediate for organic synthesis but caution should be exercised when handling this lactone because it is a known carcinogen. 

Nucleophilic Addition. Reagents with labile hydrogen atoms, such as alcohols, thiols, phenols, carboxyHc acids and amines, add to ketenes giving the corresponding carboxyHc acid derivatives (1) as shown ia Figure 1 (38). Not many are of practical importance, as there are better ways to such... 

Simple olefins do not usually add well to ketenes except to ketoketenes and halogenated ketenes. Mild Lewis acids as well as bases often increase the rate of the cyclo addition. The cycloaddition of ketenes to acetylenes yields cyclobutenones. The cycloaddition of ketenes to aldehydes and ketones yields oxetanones. The reaction can also be base-cataly2ed if the reactant contains electron-poor carbonyl bonds. Optically active bases lead to chiral lactones (41—43). The dimerization of the ketene itself is the main competing reaction. This process precludes the parent compound ketene from many [2 + 2] cyclo additions. Intramolecular cycloaddition reactions of ketenes are known and have been reviewed (7). 

Ketene Insertions. Ketenes insert into strongly polarized or polarizable single bonds, such as reactive carbon—halogen bonds, giving acid hahdes (7) and into active acid haUdes giving haUdes of p-ketoacids (8) (46). Phosgene [77-44-5] (47) and thiophosgene [463-71-8] (48) also react with ketenes. 

Manufacture. Ketenes can be considered the internal anhydrides of the corresponding carboxyHc acids, and as such can be made by removing a molecule of water from these acids, either directly or indirectly. Numerous methods to convert a carboxyHc acid or derivative to the corresponding ketene have been described (1 4). 

---