Japan Commission

The sequence of the remainii steps of synthesis gas preparation is CO shift conversion, removal of H2S and CO2 by Rectisol wash (cold methanol), and liquid nitrogen wash. As in other partial oxidation processes, the H2S is converted to elemental sulfur. Ube Industries, Japan, commissioned a 1,500-tpd ammonia plant in 1984 using the Texaco coal gasification process. An energy consumption of 10.9 Gcal/tonne of ammonia is stated this is lower than the normal quoted f ure of 11.6 Gcal/ tonne of NH3 for coal-based processes 131]. Another 1,000 tpd coal-based ammonia plant is scheduled for startup at Wehei, China, in 1996. 

Japan International Cooperation Agency, in Metal Mining Agemy of Japan, South Pacific AppHed Geoscience Commission (SOPAC), Suva, Fiji, 1991. 

Idemitsu Process. Idemitsu built a 50 t x 10 per year plant at Chiba, Japan, which was commissioned in Febmary of 1989. In the Idemitsu process, ethylene is oligomerised at 120°C and 3.3 MPa (33 atm) for about one hour in the presence of a large amount of cyclohexane and a three-component catalyst. The cyclohexane comprises about 120% of the product olefin. The catalyst includes sirconium tetrachloride, an aluminum alkyl such as a mixture of ethylalurninumsesquichloride and triethyl aluminum, and a Lewis base such as thiophene or an alcohol such as methanol (qv). This catalyst combination appears to produce more polymer (- 2%) than catalysts used in other a-olefin processes. The catalyst content of the cmde product is about 0.1 wt %. The catalyst is killed by using weak ammonium hydroxide followed by a water wash. Ethylene and cyclohexane are recycled. Idemitsu s basic a-olefin process patent (9) indicates that linear a-olefin levels are as high as 96% at C g and close to 100% at and Cg. This is somewhat higher than those produced by other processes. 

It is carried out in the Hquid phase at 100—130°C and catalyzed by a soluble molybdenum naphthenate catalyst, also in a series of reactors with interreactor coolers. The dehydration of a-phenylethanol to styrene takes place over an acidic catalyst at about 225°C. A commercial plant (50,51) was commissioned in Spain in 1973 by Halcon International in a joint venture with Enpetrol based on these reactions, in a process that became known as the Oxirane process, owned by Oxirane Corporation, a joint venture of ARCO and Halcon International. Oxirane Corporation merged into ARCO in 1980 and this process is now generally known as the ARCO process. It is used by ARCO at its Channelview, Texas, plant and in Japan and Korea in joint ventures with local companies. A similar process was developed by Shell (52—55) and commercialized in 1979 at its Moerdijk plant in the Netherlands. The Shell process uses a heterogeneous catalyst of titanium oxide on siHca support in the epoxidation step. Another plant by Shell is under constmction in Singapore (ca 1996). 

Also, the electronic control-valve device s level of immunity to, and emission of, electromagnetic interference (EMI) can be an issue in the chemical-valve environment. EMI requirements for the control-valve devices are presently mandatory in the European Community but voluntary in the United States, Japan, and the rest of the world. International Electrotechnical Commission (lEC) SOI, Parts I through 4, Electromagnetic Compatibihty for Industrial Process Measurement and Control Equipment, defines tests and requirements for control-device immunity. Immunity and emission standards are addressed in CENELEC (European Committee for Electrotechnical Standardization) EN 50 081-1 1992, EN 50 081-2 1993, EN 50 082-1 1992, and prEN 50 082-2 1994. 

In 1999, the Joint FAO/WHO Codex Alimentary Commission Session agreed to recommend labeling of eight kinds of food which contain ingredients known to be allergens. This movement has led the Japanese goverrunent to take new measures to tackle food allergies in Japan. 

The early 1970 s saw the development of many new coal-based, synthetic-fuel, fluidized-bed processes which operated at high pressures. The scientists and engineers charged with designing these processes realized that there was a severe lack of information on how pressure (and also temperature) affected the operation of fluidized beds. Therefore, several studies to determine the effect of pressure on the operation of fluidized beds were commissioned. During the same period, other researchers in Japan, Europe, and the U.S. were also starting to conduct research to determine the effects that temperature and pressure have on fluidized systems. 

The first commercial Fischer-Tropsch facility was commissioned in 1935, and by the end of the Second World War a total of fourteen plants had been constructed. Of these, nine were in Germany, one in France, three in Japan, and one in China. Both German normal-pressure and medium-pressure processes (Table 18.1) were employed. The cobalt-based low-temperature Fischer-Tropsch (Co-LTFT) syncrude produced in these two processes differed slightly (Table 18.2), with the product from the medium-pressure process being heavier and less olefinic.11 In addition to the hydrocarbon product, the syncrude also contained oxygenates, mostly alcohols and carboxylic acids. 

Norifumi Ukaji Environmental Cryobiology Group, Institute of Low Temperature Science, Hokkaido University, Sapporo, Japan Jennifer L. Wolny Fish and Wildlife Conservation Commission, Florida Marine Research Institute, St. Petersburg, FL Shizuo Yoshida Environmental Cryobiology Group, Institute of Low Temperature Science, Hokkaido University, Sapporo, Japan... 

BNCT was restarted in the United States in September 1994 at Brookhaven National Laboratory and shortly thereafter at MIT using epithermal neutron beams (BNL trials ended in 1999 after the treatment of 53 patients but continued at MIT) these programs are supported by the Department of Energy. Forty patients were treated by the end of 1997. In Europe, the European Commission supports a BNCT program in Petten, The Netherlands. The three first patients were treated in 1997. The thermal neutron beam program continues in Japan. 

Survey on flavouring substances currently marketed or used in Japan (summary), March 2001. flavor Committee, Japan Flavor and Fragrance Materials Association Discussion paper on the development of a Codex Guideline that establishes safe conditions of use for flavourings in foods with a reference to the evaluations completed by JECFA (2005). Codex Alimentarius Commission, Joint FAO/WHO Food Standards Programme, Rome... 

Presentation by Hiroto Yoshimura, Deputy Commissioner General of the National Police Agency of Japan, to the 50th Commission on Narcotic Drugs, Vienna, March 12-16, 2007. 

---