Iron oxide General

Mag netic Tapes. Chromium dioxide, Cr02, is used as a ferromagnetic material in high fidelity magnetic tapes (qv). Chromium dioxide has several technical advantages over the magnetic iron oxides generally used (58,246). 

If the deposit is tested with concentrated HC1, some of the iron oxides generally dissolve quite easily. If the acid solution is then made... 

Iron oxides (generally added unintentionally) 10-less than 1... 

Elastomeric shield materials (ESM) have been developed as low density flexible ablators for low shear appHcations (49). General Electric s RTV 560 is a foamed silicone elastomer loaded with silicon dioxide [7631-86-9] and iron oxide [1317-61 -9] particles, which decomposes to a similar foam of Si02, SiC, and EeSiO. Silicone resins are relatively resistant to thermal decomposition and the silicon dioxide forms a viscous Hquid when molten (50) (see... 

Mixed-Meta.1 Oxides. Generally, iron oxide is the principal component of mixed-metal oxides. These affect the sulfuric and oleum consumption in HF production. 

Pure iron is a silvery white, relatively soft metal and is rarely used commercially. Typical properties are Hsted in Table 1. Electrolytic (99.9% pure) iron is used for magnetic cores (2) (see Magnetic materials, bulk). Native metallic iron is rarely found in nature because iron which commonly exhibits valences of +2 and +3 combines readily with oxygen and sulfur. Iron oxides are the most prevalent form of iron (see Iron compounds). Generally, these iron oxides (iron ores) are reduced to iron and melted in a blast furnace. The hot metal (pig iron) from the blast furnace is refined in steelmaking furnaces to make steel... 

Sulfide collectors ia geaeral show Htfle affinity for nonsulfide minerals, thus separation of one sulfide from another becomes the main issue. The nonsulfide collectors are in general less selective and this is accentuated by the large similarities in surface properties between the various nonsulfide minerals (42). Some examples of sulfide flotation are copper sulfides flotation from siUceous gangue sequential flotation of sulfides of copper, lead, and zinc from complex and massive sulfide ores and flotation recovery of extremely small (a few ppm) amounts of precious metals. Examples of nonsulfide flotation include separation of sylvite, KCl, from haUte, NaCl, which are two soluble minerals having similar properties selective flocculation—flotation separation of iron oxides from siUca separation of feldspar from siUca, siUcates, and oxides phosphate rock separation from siUca and carbonates and coal flotation. 

Technical molybdic oxide can be reduced by reaction of ferrosiUcon in a thermite-type reaction. The resulting product contains about 60% molybdenum and 40% iron. Foundries generally use ferromolybdenum for adding molybdenum to cast iron and steel, and steel mills may prefer ferromolybdenum to technical molybdic oxide for some types of steels. 

In the Bnchamp process, nitro compounds are reduced to amines in the presence of iron and an acid. This is the oldest commercial process for preparing amines, but in more recent years it has been largely replaced by catalytic hydrogenation. Nevertheless, the Bnchamp reduction is still used in the dyestuff industry for the production of small volume amines and for the manufacture of iron oxide pigments aniline is produced as a by-product. The Bnchamp reduction is generally mn as a batch process however, it can also be mn as a continuous (48) or semicontinuous process (49). 

Pretreatment For most membrane applications, particularly for RO and NF, pretreatment of the feed is essential. If pretreatment is inadequate, success will be transient. For most applications, pretreatment is location specific. Well water is easier to treat than surface water and that is particularly true for sea wells. A reducing (anaerobic) environment is preferred. If heavy metals are present in the feed even in small amounts, they may catalyze membrane degradation. If surface sources are treated, chlorination followed by thorough dechlorination is required for high-performance membranes [Riley in Baker et al., op. cit., p. 5-29]. It is normal to adjust pH and add antisealants to prevent deposition of carbonates and siillates on the membrane. Iron can be a major problem, and equipment selection to avoid iron contamination is required. Freshly precipitated iron oxide fouls membranes and reqiiires an expensive cleaning procedure to remove. Humic acid is another foulant, and if it is present, conventional flocculation and filtration are normally used to remove it. The same treatment is appropriate for other colloidal materials. Ultrafiltration or microfiltration are excellent pretreatments, but in general they are... 

Ceramics and minerals present many common problems, but ceramics warrant special treatment because elements of low atomic number predominate in them and they consequently offer x-ray emission spectrog-raphy of the light elements an excellent opportunity to prove its usefulness. Scott,8 in making this clear, emphasized the absorption and enhancement effects to be expected, and pointed out the need for careful sample preparation. By use of a General Electric XRD-5 spectrograph and associated equipment, he set up working curves for alumina, silica, potash, lime, phosphate, titania, and iron oxide in clays, refractories, and other ceramic materials. 

---