Iodine mechanism

An intermediate reduction of aryldiazonium salts Ar-N =N to the diazo radicals Ar-N=N also occurs when aryldiazonium salts react with KI to yield aryl iodides (Figure 5.55). Therefore, aryl radicals Ar are obtained under these conditions, too. Their fate, however, differs from that of the aryl radicals, which are faced with nucleophiles in the presence of Cu(II) (cf. Figure 5.53) or H3P02 (cf. Figure 5.54) the iodination mechanism of Figure 5.55 is a radical chain reaction consisting of four propagation steps. 

The iodination mechanism of Figure 5.45 is a radical chain reaction, which consists of four propagation steps. 

The Turing mechanism requires that the diffusion coefficients of the activator and inlribitor be sufficiently different but the diffusion coefficients of small molecules in solution differ very little. The chemical Turing patterns seen in the CIMA reaction used starch as an indicator for iodine. The starch indicator complexes with iodide which is the activator species in the reaction. As a result, the complexing reaction with the immobilized starch molecules must be accounted for in the mechanism and leads to the possibility of Turing pattern fonnation even if the diffusion coefficients of the activator and inlribitor species are the same 62. 

Hydriodic acid. A 1-5 litre three-necked flask is charged with a mixture of 480 g. of iodine and 600 ml. of water. The central aperture is fitted with a stopper carrying an efficient mechanical stirrer leading... 

Equip a 500 ml. three necked flask with a reflux condenser, a mercury-sealed mechanical stirrer and separator funnel, and support it on a water bath. Attach an absorption device (Fig. II, 8, 1, c) to the top of the condenser (1). Place 134 g. (152 ml.) of A.R, benzene and 127 g. of iodine in the flask, and heat the water bath to about 50° add 92 ml. of fuming nitric acid, sp. gr. 1-50, slowly from the separatory funnel during 30 minutes. Oxides of nitrogen are evolved in quantity. The temperature rises slowly without the application of heat until the mixture boils gently. When all the nitric acid has been introduced, reflux the mixture gently for 15 minutes. If iodine is still present, add more nitric acid to the warm solution until the purple colour (due to iodine) changes to brownish-red. 

Into a 1-litre beaker, provided with a mechanical stirrer, place 36 - 8 g. (36 ml.) of aniline, 50 g. of sodium bicarbonate and 350 ml. of water cool to 12-15° by the addition of a little crushed ice. Stir the mixture, and introduce 85 g. of powdered, resublimed iodine in portions of 5-6 g, at intervals of 2-3 minutes so that all the iodine is added during 30 minutes. Continue stirring for 20-30 minutes, by which time the colour of the free iodine in the solution has practically disappeared and the reaction is complete. Filter the crude p-iodoaniline with suction on a Buchner funnel, drain as completely as possible, and dry it in the air. Save the filtrate for the recovery of the iodine (1). Place the crude product in a 750 ml. round-bottomed flask fitted with a reflux double surface condenser add 325 ml. of light petroleum, b.p. 60-80°, and heat in a water bath maintained at 75-80°. Shake the flask frequently and after about 15 minutes, slowly decant the clear hot solution into a beaker set in a freezing mixture of ice and salt, and stir constantly. The p-iodoaniline crystallises almost immediately in almost colourless needles filter and dry the crystals in the air. Return the filtrate to the flask for use in a second extraction as before (2). The yield of p-iodoaniline, m.p. 62-63°, is 60 g. 

Method 2. Equip a 1 htre thre necked flask with a double surface reflux condenser, a mechanical stirrer and a separatory funnel, and place 12 -2 g. of dry magnesium turnings, a crystal of iodine, 50 ml. of sodium-dried ether and 7-5 g. (5 ml.) of a-bromonaphthalene (Section IV,20) in the flask. If the reaction does not start immediately, reflux gently on a water bath until it does remove the water bath. Stir the mixture, and add a solution of 96 g. (65 ml.) of a-bromonaphthalene in 250 ml. of anhydrous ether from the separatory funnel at such a rate that the reaction is vmder control (1 -5-2 hours). Place a water bath under the flask and continue the stirring and refluxing for a further 30 minutes. The Grignard reagent collects as a heavy oil in the bottom of the flask ... 

Place 65 g. of clean dry zinc wool and a few crystals of iodine in a 2 5 htre three-necked flask, equipped with an efficient reflux condenser with drying tube, a mechanical stirrer, and a dropping funnel. Prepare a mixture... 

Amino-3 5-diiodobenzoic acid. In a 2 litre beaker, provided with a mechanical stirrer, dissolve 10 g. of pure p-aminobenzoic acid, m.p. 192° (Section IX,5) in 450 ml. of warm (75°) 12 -5 per cent, hydrochloric acid. Add a solution of 48 g. of iodine monochloride (1) in 40 ml. of 25 per cent, hydrochloric acid and stir the mixture for one minute during this time a yellow precipitate commences to appear. Dilute the reaction mixtiue with 1 litre of water whereupon a copious precipitate is deposited. Raise the temperature of the well-stirred mixture gradually and maintain it at 90° for 15 minutes. Allow to cool to room tempera-tiue, filter, wash thoroughly with water and dry in the air the yield of crude acid is 24 g. Purify the product by dissolving it in dilute sodium hydroxide solution and precipitate with dilute hydrochloric acid the yield of air-dried 4-amino-3 5-diiodobenzoic acid, m.p. >350°, is 23 g. 

When unsubstituted, C-5 reacts with electrophilic reagents. Thus phosphorus pentachloride chlorinates the ring (36, 235). A hydroxy group in the 2-position activates the ring towards this reaction. 4-Methylthiazole does not react with bromine in chloroform (201, 236), whereas under the same conditions the 2-hydroxy analog reacts (55. 237-239. 557). Activation of C-5 works also for sulfonation (201. 236), nitration (201. 236. 237), Friede 1-Crafts reactions (201, 236, 237, 240-242), and acylation (243). However, iodination fails (201. 236). and the Gatterman or Reimer-Tieman reactions yield only small amounts of 4-methyl-5-carboxy-A-4-thiazoline-2-one. Recent kinetic investigations show that 2-thiazolones are nitrated via a free base mechanism. A 2-oxo substituent increases the rate of nitration at the 5-position by a factor of 9 log... 

Oxidative dimerization of various 2-benzyloxy-2-thiazoline-5-ones (222) catalyzed by iodine and triethylamine is another example of the nucleophilic reactivity of the C-4 atom (469) (Scheme 112). Treatment of 212 with pyrrolidinocyclohexene yields the amide (223) (Scheme 113). The mechanism given for the formation of 223 is proposed by analogy with the reactivitx of oxazolones with enamines (4701. 4-Substituted 2-phenylthiazol-5(4Hi-ones react with A -morphoiino-l-cyclohexene in a similar manner (562j. Recently. Barret and Walker have studied the Michael addition products... 

Finally, accurate mass measurement can be used to help unravel fragmentation mechanisms. A very simple example is given in Figure 38.2. If it is supposed that accurate mass measurements were made on the two ions at 203.94381 and 77.03915, then their difference in mass (126.90466) corresponds exactly to the atomic mass of iodine, showing that this atom must have been eliminated in the fragmentation reaction. 

The thermal conductivity of soHd iodine between 24.4 and 42.9°C has been found to remain practically constant at 0.004581 J/(cm-s-K) (33). Using the heat capacity data, the standard entropy of soHd iodine at 25°C has been evaluated as 116.81 J/ (mol-K), and that of the gaseous iodine at 25°C as 62.25 J/(mol-K), which compares satisfactorily with the 61.81 value calculated by statistical mechanics (34,35). 

Bromine and chlorine convert the 1- and 2-butenes to compounds containing two atoms of halogens attached to adjacent carbons (vicinal dihahdes). Iodine fails to react. In this two-step addition mechanism the first step involves the formation of a cation. The halonium ion formed (a three-membered ring) requires antiaddition by the anion. 

Addition to the Double Bond. Chlorine, bromine, and iodine react with aHyl chloride at temperatures below the inception of the substitution reaction to produce the 1,2,3-trihaLides. High temperature halogenation by a free-radical mechanism leads to unsaturated dihalides CH2=CHCHC1X. Hypochlorous and hypobromous acids add to form glycerol dihalohydrins, principally the 2,3-dihalo isomer. Dehydrohalogenation with alkah to epicbl orobydrin [106-89-8] is ofgreat industrial importance. 

Halogens react with benzo[6]furan by an addition-elimination mechanism to give 2- and 3-substituted products (76JCS(P2)266). Treatment of benzo[6]thiophene with chlorine or bromine in acetic acid gives predominantly 3-substituted products (71JCS(B)79). 2,2,3,3,4,5,6,7-Octachloro-2,3-dihydrobenzothiophene is obtained when benzo[6]thio-phene is treated with chlorine in the presence of 1 mole of iodine (80JOC2l5l). 

The well-known reaction of Ni(II) with dimethylglyoxime (H Dm) in alkaline medium under the influence of such oxidants as persulphate and iodine is widely used for the photometric determination of nickel. The red product (RP) of this reaction is used for this purpose. However, the nature of this red compound has not been defined yet. Using of peroxyacids makes it possible to obtain additional data concerning the conditions and mechanism of generation of RP as well as to improve the metrological pai ameters of the method. 

In a i-l. three-necked, round-bottom flask fitted with a mechanical stirrer through a mercury seal, a separatory funnel and an efficient reflux condenser to which a calcium chloride tube is attached, are placed 25 g. (1.03 moles) of magnesium turnings 140 cc. of dry ether, and a small crystal of iodine. The stirrei is started and a small portion (about 10 cc.) of a solution of 118.5 g. (i mole) of cyclohexyl bromide (Note i) in 120 cc. of dry ether is added through the separatory funnel. After the reaction starts, the remainder of the solution is run in at such a rate that the whole is added at the end of forty-five minutes. The mixture is stirred and refluxed for an additional thirty to forty-five minutes. 

The standard entropy change for the atom-molecule reactions is in the range 5-20 mole and the halogen molecule dissociation has an eiiU opy change of about 105 e.u. The halogen molecule dissociation energy decreases from chlorine to iodine, but the atom-molecule reactions become more endothermic from chlorine to iodine, and this latter effect probably influences the relative contributions to the mechanism from chain reaction and biinolecular reaction. 

In a 3-I. three-necked flask, fitted with a mechanical stirrer, a reflux condenser, and a separatory funnel, are placed 24.3 g. (i gram atom) of magnesium turnings, 500 cc. of absolute ether, a crystal of iodine, and a 5- to lo-cc. portion of 126.5 g- cc., I mole) of freshly distilled benzyl chloride (b.p. 177-179°). In a few minutes the reaction starts (Note 1) and is controlled if necessary by cooling with a wet towel. The stirrer is started and the balance of the benzyl chloride is run in as fast as the refluxing will permit. The addition requires from one to two hours, and when completed the mixture is refluxed ofi the steam bath with stirring for three hours. With the stirrer stUl running, 182 g. (r mole) of benzophenone (Org. Syn. Coll. Vol. i, 89) dissolved in 500 cc. of absolute ether is added at such a rate that the mixture refluxes rapidly. This requires about twenty minutes and then the reaction mixture is allowed to stand for two hours (Note 2). 

There have also been relatively few mechanistic studies of the addition of iodine. One significant feature of iodination is that it is easily reversible, even in the presence of excess alkene. The addition is stereospecifically anti, but it is not entirely clear whether a polar or a radical mechanism is involved. ... 

Radical substitution reactions by iodine are not practical because the abstraction of hydrogen from hydrocarbons by iodine is endothermic, even for stable radicals. The enthalpy of the overall reaction is also slightly endothermic. Thus, because of both the kinetic problem excluding a chain reaction and an unfavorable equilibrium constant for substitution, iodination cannot proceed by a radical-chain mechanism. 

Iodine azide, on the other hand, forms pure adducts with A -, A - and A -steroids by a mechanism analogous to that proposed for iodine isocyanate additions. Reduction of such adducts can lead to aziridines. However, most reducing agents effect elimination of the elements of iodine azide from the /mwj -diaxial adducts of the A - and A -olefins rather than reduction of the azide function to the iodo amine. Thus, this sequence appears to be of little value for the synthesis of A-, B- or C-ring aziridines. It is worthy to note that based on experience with nonsteroidal systems the application of electrophilic reducing agents such as diborane or lithium aluminum hydride-aluminum chloride may yet prove effective for the desired reduction. Lithium aluminum hydride accomplishes aziridine formation from the A -adducts, Le., 16 -azido-17a-iodoandrostanes (97) in a one-step reaction. The scope of this addition has been considerably enhanced by the recent... 

---