Iodine degradation effects

As an example, when automotive catalytic mufflers and converters were introduced many years ago, the automobile industry required the petrochemical industry to eliminate lead from gasoline since lead degraded and reduced the effectiveness of the catalyst and caused the destruction of the gasoline. One set of industrial compounds that can harm catalysts are halogens, a family of compounds that include chlorine, bromine, iodine, and fluorine. Bromine, while not prevalent in industry, is present in chemical plants. Freons are fluorine compounds. Silicone is another compound that is deleterious to catalysts. It is used as a slip agent, or a lubricant, in many industrial processes. Phosphorous, heavy metals (zinc, lead), sulfur compounds, and any particulate can result in shortening the life of the catalyst. It is necessary to estimate the volume or the amount of each of those contaminants, to assess the viability of catalytic technologies for the application. 

Amino-1,2,4-thiadiazoles liberate iodine, though not quantitatively, from potassium iodide in mineral acid solution.6 Hydrogen sulfide in acid solution degrades the parent compound completely to thiourea, sulfur, and ammonium chloride, but it is without effect on the acetyl derivative.8... 

As discussed earlier, substitution onto the polyacetylene chain invariably has a deleterious effect on dopability and conduction properties. At the same time the stability tends to improve. Masuda et al.583) studied a large range of substituted polyacetylenes and found that stability increased with the number and bulkiness of the substituents, so that the polymers of aromatic disubstituted acetylenes were very stable, showing no reaction with air after 20 h at 160 °C. Unfortunately, none of these polymers is conducting. Deitz et al.584) studied copolymers of acetylene and phenylacetylene they found that poly(phenylacetylene) degrades even more rapidly than does polyacetylene and that the behaviour of copolymers is intermediate. Encapsulation of the iodine-doped polymers had little effect on the degradation, which is presumably at least in part due to iodination of the chain. 

The decrease in polymer degradation was less pronounced than that of the iodine oxidation. High temperatures are not required to generate effective shear forces in the vicinity of the cavitation bubbles however, the effects of the two kinds of sonication cannot be simply compared by their intensities. Polymer degradation is very much favored under sonication... 

Solid-state cellulose can also be noncrystalline, sometimes called amorphous. Intermediate situations are also likely to be important but not well characterized. One example, nematic ordered cellulose has been described [230]. In most treatments that produce amorphous cellulose, the whole fiber is severely degraded. For example, decrystallization can be effected by ball milling, which leaves the cellulose as a fine dust. In this case, some crystalline structure can be recreated by placing the sample in a humid environment. Another approach uses phosphoric acid, which can dissolve the cellulose. Precipitation by dilution with water results in a material with very little crystallinity. There is some chance that the chain may adopt a different shape (a collapsed, sixfold helix) after phosphoric acid treatment. This was concluded because the cellulose stains blue with iodine (see Figure 5.12), similar to the sixfold amylose helix in the starch-iodine complex. 

There is some evidence that a previously known synergy may be due to inhibiting an oxidase. Bromoxynil and ioxynil synergize amitrole it was later found that their degradation products (their respective acids) had the same effect (39). It was proposed that this effect was due to the release of oxydase inhibiting bromine and iodine from the herbicides (39). 

---