International Systems of Units

Based on ASTM E380-89a (Standard Practice for Use of the International System of Units (SI)), American Society for Testing and Materials, 1916 Race Street, Philadelphia, Pa. 19103, 1989. 

Basic Standards for Chemical Technology. There are many numerical values that are standards ia chemical technology. A brief review of a few basic and general ones is given hereia. Numerical data and definitions quoted are taken from References 16—19 (see Units and conversion factors) and are expressed ia the International System of Units (SI). A comprehensive guide for the appHcation of SI has been pubUshed by ASTM (20). 

Time. The unit of time in the International System of units is the second "the duration of 9,192,631,770 periods of the radiation corresponding to the transition between the two hyperfine levels of the fundamental state of the atom of cesium-133" (25). This definition is experimentally indistinguishable from the ephemetis-second which is based on the earth s motion. 

Pressure is defined as force per unit of area. The International System of Units (SI) pressure unit is the pascal (Pa), defined as 1.0 N /m. Conversion factors from non-SI units to pascal are given in Table 1 (see also Units and conversion factors front matter). An asterisk after the sixth decimal place indicates that the conversion factor is exact and all subsequent digits are 2ero. Relationships that are not followed by an asterisk are either the results of physical measurements or are only approximate. The factors are written as numbers greater than 1 and less than 10, with 6 or fewer decimal places (1). 

In 1954, the 10th CGPM added the degree Kelvin as the unit of temperature and the candela as the unit of luminous intensity. At the time of the 11th CGPM in 1960, this new system with six base units was formalized with the tide International System of Units. Its abbreviation in all languages is SI, from the French l e Sjstume International d Unitus. 

The International System of Units (SI), NIST Special Publication 330, Superintendent of Documents, U.S. Government Printing Office, Washington, D.C., 1991. 

From Eq. (6-1) it is evident that A has the units of k and that E has the units energy per mole. For many decades the usual units of E were kilocalories per mole, but in the International System of Units (SI) E should be expressed in kilojoules per mole (1 kJ = 4.184 kcal). In order to interpret the extant and future kinetic literature, it is essential to be able to use both of these forms. 

Metric Units of Measiu ement. For the purpose of this Code, metric units of measurement are in accordance with the modernized metric system known as the International System of Units (SI). 

The International System of Units (SI) provides a coherent system of measurement units, and all the physical quantities required for refrigeration and air-conditioning can he derived from the basic standards ... 

As you can see from this discussion, a wide number of different units can be used to express measured quantities in the metric system. Ibis proliferation of units has long been of concern to scientists. In 1960 a self-consistent set of metric units was proposed. This so-called International System of Units (SI) is discussed in Appendix 1. The SI units for the four quantities discussed are... 

Over the past 40 years, the International System of Units has met with a decidedly mixed reception, at least in the United States. On the one hand, scientists have adopted the joule as... 

PT Plastics Technology magazine SI International System of Units... 

Mullin, J. W. The Chemical Engineer (London) No. 211 (Sept. 1967) 176. SI units in chemical engineering. Mullin, J. W. The Chemical Engineer London) No. 254(1971)352. Recent developments in the change-over to the International System of Units (SI). 

SI (Systeme International) The International System of units a collection of definitions of units and symbols and their deployment. It is an extension and rational ization of the metric system. See also Appendix IB. side chain A hydrocarbon substituent on a hydrocarbon chain. 

All units in this book are metric, specifically the International System of Units (SI) and ametric conversion guide is included atthe end of the book. 

The key difference between a CRM and an RM is the traceability. In order to play any role at aU in metrology, traceability is a key property. Traceability refers to a property value of the CRM, and thus to the underlying measurements. Insufficient traceability of these measurement results will eventually lead to a RM that cannot be certified, as the property value cannot be related to other standards. In the ideal case, traceability is realized up to the International System of Units, SI, but this is only feasible for a very small number of CRMs. 

Becquerel (Bq)—International System of Units unit of activity and equals that quantity of radioactive material in which one transformation (disintegration) occurs per second (see Units). 

SI Units—The International System of Units as defined by the General Conference of Weights and Measures in 1960. These units are generally based on the meter/kilogram/second units, with special quantities for radiation including the becquerel, gray, and sievert. 

The ICRU (1980), ICRP (1984), and NCRP (1985) now recommend that the rad, roentgen, curie, and rem be replaced by the SI units gray (Gy), Coulomb per kilogram (C/kg), Becquerel (Bq), and sievert (Sv), respectively. The relationship between the customary units and the international system of units (SI) for radiological quantities is shown in Table D-5. 

The Systeme International d Unites (International System of Units) has the abbreviation SI. It includes base units, supplementary and derived units which together form a coherent system of units. Prefixes are used to form decimal multiples and sub-multiples of the SI units. 

International standards, 75 755-757 growing role of, 24 262 International Standards Organization (ISO). See also International Organisation for Standardization (ISO) ISO entries reliability and, 26 993 silicon carbide standards by, 22 537, 538 International Sugar Scale, 23 473 International System of Units (SI Units), 7 xi-xxvi 2-26 ix-xxiv. See also SI Units... 

The unit kPa is in common use today and is part of the International System of Units (SI). However, it is also common to encounter the terms bars and atmospheres (atm) when reading about soil water. One bar is approximately equal to one atmosphere pressure, which is abbreviated atm, and a bar is equal to 100 kPa (-1 bar = -100 kPa). 

The International Union of Pure and Applied Chemistry (IUPAC) recommends the use of the International System of Units (SI) in all scientific and technical publications [13]. Appendix A list the names and symbols adopted for the seven SI base units, together with several SI derived units, which have special names and are relevant in molecular energetics. Among the base units, the kelvin (symbol K) and the mole (mol), representing thermodynamic temperature and amount of substance, respectively, are of particular importance. Derived units include the SI unit of energy, the joule (J), and the SI unit of pressure, the pascal (Pa). 

B. N. Taylor, Guide to the Use of the International System of Units (SI), NIST Special Publication 811, Gaithersburg, MD, 1995. http //www.physics.nist.gov/cuu/units/current.html. http //www.bpim.fr. The amount of substance should be expressed in units of moles, with one mole being Avogadio s constant number of designated particles or groups of particles, whether these are elections, atoms, molecules, or the number of molecules of reactants and products specified by a chemical equation. 

M. A. Paul, International union of pure and applied chemistry. Manual of Symbols and Terminology for Physicochemical Quantities and Units, Butterworth, London, 1975. B. N. Taylor, ed.. The International System of Units, 7th ed., NIST Special Publication 330 (2001), http //physlab.nist.gOv/Pubs/SPS330/sps330.html. 

The system of units used worldwide today is the International System of Units, in French, Systeme Inter national d Unites (SI). The Bureau International des Poids et Mesures (BIPM) adopted the SI system at its 11th General Conference on Weights and Measures (Conference Generate des Poids et Mesures -CGPM-) in 1960. 

The programmes for calibration of equipment shall be designed and operated in a way to ensure that calibrations and measurements made by the calibration laboratory are traceable to the International System of Units (SI) (Systeme international d unites). 

This lack of standards was resolved in the second half of the 19th centniy with the signatnre of the Meter Convention. This convention is a diplomatic treaty, which was signed in Paris (France) on 20 May 1875. This treaty establishes the International System of Units (SI) for the signatory countries. Currently 52 countries (all the major industrialized countries) have signed the treaty, and 36 countries are associate members. 

---