Insulated properties

Glass is available with good insulating properties. It is comparatively cheap and the technology of its application is well known. Glass offers excellent vacuum tightness and can be joined e.g. with copper or tungsten. 

Ethylene. Under the influence of pressure and a catalyst, ethylene yields a white, tough but flexible waxy sohd, known as Polythene. Polyethylene possesses excellent electric insulation properties and high water resistance it has a low specific gravity and a low softening point (about 110°). The chemical inertness oi Polythene has found application in the manufacture of many items of apparatus for the laboratory. It is a useful lubricant for ground glass connexions, particularly at relatively high temperatures. 

Tetrafluoroethylene. Emulsion polymerisation of tetrafluoroethylene, catalysed by oxygen, yields polytetrafluoroethylene (Tejlon) as a very tough horn-hke material of high melting point. It possesses excellent electrical insulation properties and a remarkable inertness towards all chemical reagents, including aqua regia. 

The silicone oils and silicone resins find application as (i) lubricants (their change of viscosity with temperature is small), (ii) hydraulic fluids (they are unusually compressible), (iii) dielectric fluids, (iv) for the pro duction of water-repellant surfaces, and (v) in the electrical industry (because of their high insulating properties). 

The selection of a material having the right balance of ablation and insulation properties is needed to produce optimum heatshield performance. 

As a tme thermoplastic, FEP copolymer can be melt-processed by extmsion and compression, injection, and blow molding. Films can be heat-bonded and sealed, vacuum-formed, and laminated to various substrates. Chemical inertness and corrosion resistance make FEP highly suitable for chemical services its dielectric and insulating properties favor it for electrical and electronic service and its low frictional properties, mechanical toughness, thermal stabiUty, and nonstick quaUty make it highly suitable for bearings and seals, high temperature components, and nonstick surfaces. 

Electrical Properties. Like unfluorinated siHcone counterparts, fluorosihcone elastomers have inherently good electrical insulating properties. The dielectric properties remain relatively unchanged when the elastomer is exposed to severe environments. 

Steam-Chest Expansion. In steam-chest expansion the resin beads in which gas is already present are poured into molds into which steam is injected. The steam increases the temperature close to the melting point and expands within the stmcture to create beads with food cushioning and insulating properties. Expanded polystyrene is widely used in this process for thermal insulation of frozen food packaging. 

Poly(phenylquinoxaline—arnide—imides) are thermally stable up to 430°C and are soluble in polar organic solvents (17). Transparent films of these materials exhibit electrical insulating properties. Quinoxaline—imide copolymer films prepared by polycondensation of 6,6 -meth5lene bis(2-methyl-3,l-benzoxazine-4-one) and 3,3, 4,4 -benzophenone tetracarboxyUc dianhydride and 4,4 -oxydianiline exhibit good chemical etching properties (18). The polymers are soluble, but stable only up to 200—300°C. 

Phosphazene polymers are inherently good electrical insulators unless side-group stmctures allow ionic conduction in the presence of salts. This insulating property forms the basis for appHcations as wire and cable jackets and coatings. Polyphosphazenes also exhibit excellent visible and uv radiation transparency when chromophoric substituents are absent. 

Cases can be classified as either hermetic or nonhermetic, based on their permeabiUty to moisture. Ceramics and metals are usually used for hermetic cases, whereas plastic materials are used for nonhermetic appHcations. Cases should have good electrical insulation properties. The coefficient of thermal expansion of a particular case should closely match those of the substrate, die, and sealing materials to avoid excessive residual stresses and fatigue damage under thermal cycling loads. Moreover, since cases must provide a path for heat dissipation, high thermal conductivity is also desirable. 

The maximum recommended film thickness is 25 p.m. At greater thicknesses, volatiles from the curing reaction, mainly water and some formaldehyde and phenol, can cause defects. These coatings have excellent electrical insulation properties, ie, up to 20 V/p.m, because of low moisture absorption and low conductance. The coatings are hard with low flexibiUty, depending on curing conditions and film thickness. 

Excellent insulating properties, along with the abiUty to be stmctural components, make plastics the ideal candidate materials for electrical appHcations. Although generally used as insulators, carbon black or carbon fiber can be added to make plastic materials electrically conductive, thereby expanding their usefulness in the electronics area. 

Nylon-11. Nylon-11 [25035-04-5] made by the polycondensation of 11-aminoundecanoic acid [2432-99-7] was first prepared by Carothers in 1935 but was first produced commercially in 1955 in France under the trade name Kilsan (167) Kilsan is a registered trademark of Elf Atochem Company. The polymer is prepared in a continuous process using phosphoric or hypophosphoric acid as a catalyst under inert atmosphere at ambient pressure. The total extractable content is low (0.5%) compared to nylon-6 (168). The polymer is hydrophobic, with a low melt point (T = 190° C), and has excellent electrical insulating properties. The effect of formic acid on the swelling behavior of nylon-11 has been studied (169), and such a treatment is claimed to produce a hard elastic fiber (170). 

Highly desirable properties of PPS include excellent chemical resistance, high temperature thermal stabiUty, inherent flame resistance, good inherent electrical insulating properties, and good mechanical properties. 

Pacemaker Interfaces and Leads. Problems of existing pacemaker interfaces and pacemaker lead materials made from siUcones and standard polyurethanes are environmental stress cracking, rigidity, insulation properties, and size. 

Thermal Properties. Thermal properties include heat-deflection temperature (HDT), specific heat, continuous use temperature, thermal conductivity, coefficient of thermal expansion, and flammability ratings. Heat-deflection temperature is a measure of the minimum temperature that results in a specified deformation of a plastic beam under loads of 1.82 or 0.46 N/mm (264 or 67 psi, respectively). Eor an unreinforced plastic, this is typically ca 20°C below the glass-transition temperature, T, at which the molecular mobility is altered. Sometimes confused with HDT is the UL Thermal Index, which Underwriters Laboratories estabflshed as a safe continuous operation temperature for apparatus made of plastics (37). Typically, UL temperature indexes are significantly lower than HDTs. Specific heat and thermal conductivity relate to insulating properties. The coefficient of thermal expansion is an important component of mold shrinkage and must be considered when designing composite stmctures. 

---