Infrared Spectroscopy orientation

The ease of sample handling makes Raman spectroscopy increasingly preferred. Like infrared spectroscopy, Raman scattering can be used to identify functional groups commonly found in polymers, including aromaticity, double bonds, and C bond H stretches. More commonly, the Raman spectmm is used to characterize the degree of crystallinity or the orientation of the polymer chains in such stmctures as tubes, fibers (qv), sheets, powders, and films... 

Surface analysis has made enormous contributions to the field of adhesion science. It enabled investigators to probe fundamental aspects of adhesion such as the composition of anodic oxides on metals, the surface composition of polymers that have been pretreated by etching, the nature of reactions occurring at the interface between a primer and a substrate or between a primer and an adhesive, and the orientation of molecules adsorbed onto substrates. Surface analysis has also enabled adhesion scientists to determine the mechanisms responsible for failure of adhesive bonds, especially after exposure to aggressive environments. The objective of this chapter is to review the principals of surface analysis techniques including attenuated total reflection (ATR) and reflection-absorption (RAIR) infrared spectroscopy. X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES), and secondary ion mass spectrometry (SIMS) and to present examples of the application of each technique to important problems in adhesion science. 

Interfacial water molecules play important roles in many physical, chemical and biological processes. A molecular-level understanding of the structural arrangement of water molecules at electrode/electrolyte solution interfaces is one of the most important issues in electrochemistry. The presence of oriented water molecules, induced by interactions between water dipoles and electrode and by the strong electric field within the double layer has been proposed [39-41]. It has also been proposed that water molecules are present at electrode surfaces in the form of clusters [42, 43]. Despite the numerous studies on the structure of water at metal electrode surfaces using various techniques such as surface enhanced Raman spectroscopy [44, 45], surface infrared spectroscopy [46, 47[, surface enhanced infrared spectroscopy [7, 8] and X-ray diffraction [48, 49[, the exact nature of the structure of water at an electrode/solution interface is still not fully understood. 

Chang SC, Hamelin A, Weaver MJ. 1991. Dependence of the electrooxidation rates of carbon monoxide at gold on the surface crystallographic orientation A combined kinetic-surface infrared spectroscopy study. J Phys Chem 95 5560-5567. 

Polymer films were produced by surface catalysis on clean Ni(100) and Ni(lll) single crystals in a standard UHV vacuum system H2.131. The surfaces were atomically clean as determined from low energy electron diffraction (LEED) and Auger electron spectroscopy (AES). Monomer was adsorbed on the nickel surfaces circa 150 K and reaction was induced by raising the temperature. Surface species were characterized by temperature programmed reaction (TPR), reflection infrared spectroscopy, and AES. Molecular orientations were inferred from the surface dipole selection rule of reflection infrared spectroscopy. The selection rule indicates that only molecular vibrations with a dynamic dipole normal to the surface will be infrared active [14.], thus for aromatic molecules the absence of a C=C stretch or a ring vibration mode indicates the ring must be parallel the surface. 

Some characteristics of, and comparisons between, surface-enhanced Raman spectroscopy (SERS) and infrared reflection-absorption spectroscopy (IRRAS) for examining reactive as well as stable electrochemical adsorbates are illustrated by means of selected recent results from our laboratory. The differences in vibrational selection rules for surface Raman and infrared spectroscopy are discussed for the case of azide adsorbed on silver, and used to distinguish between "flat" and "end-on" surface orientations. Vibrational band intensity-coverage relationships are briefly considered for some other systems that are unlikely to involve coverage-induced reorientation. 

M. Farnik and D. J. Nesbitt, Intramolecular energy transfer between oriented chromophores High resolution infrared spectroscopy of HCltrimer. / Chem. Phys. 121, 12386 12395 (2004). 

An important consequence of the presence of the metal surface is the so-called infrared selection rule. If the metal is a good conductor the electric field parallel to the surface is screened out and hence it is only the p-component (normal to the surface) of the external field that is able to excite vibrational modes. In other words, it is only possible to excite a vibrational mode that has a nonvanishing component of its dynamical dipole moment normal to the surface. This has the important implication that one can obtain information by infrared spectroscopy about the orientation of a molecule and definitely decide if a mode has its dynamical dipole moment parallel with the surface (and hence is undetectable in the infrared spectra) or not. This strong polarization dependence must also be considered if one wishes to use Eq. (1) as an independent way of determining ft. It is necessary to put a polarizer in the incident beam and use optically passive components (which means polycrystalline windows and mirror optics) to avoid serious errors. With these precautions we have obtained pretty good agreement for the value of n determined from Eq. (1) and by independent means as will be discussed in section 3.2. 

Vandenbussche G, Clercx A, Clercx M, et al. Secondary structure and orientation of the surfactant protein SP-B in a lipid environment. A Fourier transform infrared spectroscopy study. Biochemistry 1992 31(38) 9169-9176. 

Atomic force microscopy and attenuated total reflection infrared spectroscopy were used to study the changes occurring in the micromorphology of a single strut of flexible polyurethane foam. A mathematical model of the deformation and orientation in the rubbery phase, but which takes account of the harder domains, is presented which may be successfully used to predict the shapes of the stress-strain curves for solid polyurethane elastomers with different hard phase contents. It may also be used for low density polyethylene at different temperatures. Yield and rubber crosslink density are given as explanations of departure from ideal elastic behaviour. 17 refs. 

Infrared spectroscopy has been an important part of peptide structural analysis for 50 years now. From a rather basic beginning, applications have blossomed to encompass secondary structure analysis, polarization phenomena, membrane conformation, and orientation, and have extended to time-dependent conformational folding mechanisms. Questions have evolved from basic polymer chemistry to issues centered on peptides involved in socially... 

Applying in situ infrared spectroscopy and STM, Cai et al. [253] have studied adsorption of pyridine on Au(lll) electrodes from aqueous NaCl04 solutions. It has been found that pyridine molecule is flatly adsorbed on the surface at negative potentials. Its molecular plane rises up as the applied potential and surface concentration increase. Moreover, orientation of pyridine molecule changed with the applied STM potential. Ikezawa et al. [243] have used in situ FTIR spectroscopy to investigate adsorption of pyridine on Au(lll), Au(lOO),... 

---