INDEX mechanical properties

Various polymers, such as polythiourethanes, polythioethers, and polythioacrylates, are used to produce resins which are transparent, colorless and have a high refractive index and good mechanical properties, useful for the production of optical lenses. Higher refractive indices are promoted by sulfur compounds and especially by esters of mercaptocarboxyhc acids and polyols such as pentaerythritol (41) (see Polymers containing sulfur). 

Polyethylene and polypropylene are semitransparent plastics made by polymerization. They are produced from ethylene and propylene in a variety of grades. Their mechanical properties are determined mainly by density (degree of crystallinity) and molecular weight, characterized by the Melt Index (MI). 

Important physical properties include the density, melt flow index, crystallinity, and average molecular weight. Mechanical properties of a polymer, such as modulus (the ratio of stress to strain), elasticity, and breaking strength, essentially follow from the physical properties. 

The Underwriters Laboratories (UL) tests are recognized by various industries to provide continuous temperature ratings, particularly in electrical applications. These ratings include separate listings for electrical properties, mechanical properties including impact, and mechanical properties without impact. The temperature index is important if the final product has to receive UL recognition or approval. 

Mechanical properties, such as elastic modulus and yield point, that depend on crystallinity per se are not seriously affected by low to moderate doses of ionizing radiation. On the other hand, those mechanical properties that are sensitive to interlamellar activity are most dramatically affected by the low to moderate radiation doses. This is seen in the ultimate tensile strength and elongation at failure of the polyolefins. It is also reflected in the large change in melt index between 0 and 18 Mrad, which indicates formation of cross-links that increase with increasing... 

In an alternate synthesis, the formation of thermoplastic vulcanizate (TPV) is accomplished with two polymers, wherein one polymer is grafted with a carboxylic acid anhydride, which then is reacted with an aminosilane, which reacts with the acid anhydride and then cross-links with moismre. The vulcanizates exhibit good mechanical properties and lower melt-flow index than the starting polymers. 

Mechanical Properties and Cure Rate Index of the Mixes—Role of Dry Bonding System on the Reinforcement of Ethylene-Propylene-Diene Monomer (EPDM) Rubber with Melamine Fiber ... 

Oilfields in the North Sea provide some of the harshest environments for polymers, coupled with a requirement for reliability. Many environmental tests have therefore been performed to demonstrate the fitness-for-purpose of the materials and the products before they are put into service. Of recent examples [33-35], a complete test rig has been set up to test 250-300 mm diameter pipes, made of steel with a polypropylene jacket for thermal insulation and corrosion protection, with a design temperature of 140 °C, internal pressures of up to 50 MPa (500 bar) and a water depth of 350 m (external pressure 3.5 MPa or 35 bar). In the test rig the oil filled pipes are maintained at 140 °C in constantly renewed sea water at a pressure of 30 bar. Tests last for 3 years and after 2 years there have been no significant changes in melt flow index or mechanical properties. A separate programme was established for the selection of materials for the internal sheath of pipelines, whose purpose is to contain the oil and protect the main steel armour windings. Environmental ageing was performed first (immersion in oil, sea water and acid) and followed by mechanical tests as well as specialised tests (rapid gas decompression, methane permeability) related to the application. Creep was measured separately. 

For the same grade with the same thickness, the three indices can be identical (for example, a polyethylene grade with a 50° C UL index temperature) or different (for example, a polyamide grade with a temperature index varying from 75°C for the electrical and mechanical properties, impact included, up to 105°C for the electrical properties only). 

The UL temperature index of a specific grade is claimed to be 105°C for electrical and mechanical properties including impact strength. 

Of the various mechanical properties of a formed catalyst containing zeolite, attrition resistance is probably the most critical. This is particularly the case for FCC catalysts because of the impact on the addihon rate of fresh catalyst, particulate emissions of fines and overall catalyst flow in the reactor and regenerator. Most attrition methods are a relative determination by means of air jet attrition with samples in the 10 to 180 xm size range. For example the ASTM D5757 method attrites a humidified sample of powder with three high velocity jets of humidified air. The fines are continuously removed from the attrition zone by elucidation into a fines collection assembly. The relative attrition index is calculated from the elutriated fines removed at a specific time interval. 

Core and cladding materials are selected not only on the basis of their refractive index, but also for their processability, attenuation loss, mechanical properties, and dispersion properties. However, density, p, and refractive index, n, are critical and have been correlated for over 200 optical glasses, for which the following formula... 

SBR is the most widely used synthetic elastomer. It is an amorphous random copolymer consisting of a mixture of l.2, cis and trans isomers. Cold SBR produced at —20 C consists of 17% 1,2. 6% cis and 77% trans isomers of polybutadiene. This commercial product has a Tt of -60 C, an index of refraction of 1.534S, and a coefficient of linear expansion of 66 X 10 s cm/ cm C. Because of the high percentage of the trans isomer, it is less flexible and has a higher heat buildup, when flexed, than Hevea rubber. Although carbon black-filled or amorphous silica-filled SBR has useful physical and mechanical properties, the SBR gum rubber is inferior to Hevea rubber. 

Different classes of solid propellants DB, CMDB, and fuel rich (FR) have been developed in order to meet the requirements of various missions in terms of specific impulse (Lsp) and wide range of burn rates with low pressure index (n). High density, low temperature sensitivity and good mechanical properties constitute other essential requirements of these propellants. The salient features of such performance parameters are ... 

As its name suggests, a liquid crystal is a fluid (liquid) with some long-range order (crystal) and therefore has properties of both states mobility as a liquid, self-assembly, anisotropism (refractive index, electric permittivity, magnetic susceptibility, mechanical properties, depend on the direction in which they are measured) as a solid crystal. Therefore, the liquid crystalline phase is an intermediate phase between solid and liquid. In other words, macroscopically the liquid crystalline phase behaves as a liquid, but, microscopically, it resembles the solid phase. Sometimes it may be helpful to see it as an ordered liquid or a disordered solid. The liquid crystal behavior depends on the intermolecular forces, that is, if the latter are too strong or too weak the mesophase is lost. Driving forces for the formation of a mesophase are dipole-dipole, van der Waals interactions, 71—71 stacking and so on. 

---