Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Technology implementation

Increasing capacity of the existing institutions to plan, develop and implement technologically, environmentally and economically sound policy. [Pg.920]

In 1999, the EPA proposed stringent standards applicable to model year 2004 vehicles. Thus, the EPA continues to implement technology-forcing regulations, in which EPA tasks manufacturers with an emissions standard, and industry must develop... [Pg.452]

The ultimate amount of U.S. oil that can be recovered by "implemented technology," technology that presently exists in at least the proven field test stage, is estimated to be 14.5 billion barrels. Using "advanced technology," technology that might be conceivably developed before 2013, adds another 13 billion barrels of oil to the estimate, for a total of 27.5 billion barrels. A comparison of the distribution of ultimate recoveries by method is also shown. [Pg.99]

After issuance, permits may need to be modified to allow facilities to implement technological improvements, comply with new environmental standards, respond to changing wastestreams, and generally improve waste management practices. These modifications can be initiated by either the facility or the permitting agency. [Pg.464]

At some point during internal design, you must consider the implementation technology and make trade-offs on performance, maintainability, reliability, and so on. Hardware... [Pg.61]

The objects and their attributes are common to all implementations even though the specific representation mechanisms may differ. Even within a specific implementation technology, such as Java, there are many different ways to represent objects and their attributes. For those times when the implementation is as yet unknown or is irrelevant to the level of modeling at hand, we need a way to describe our objects and attributes independent of implementation. [Pg.82]

Solutions to ER/ES requirements can be provided through implementing technological or procedural methods. It is likely that a combination of the two will provide the final solution for a SCADA system owing to available technology restrictions. Therefore, when developing the ER/ES requirements for the system, consideration should be given to both ... [Pg.637]

Lack of economic ability due to hospitals , HMOs , and private practice patterns of unwillingness or inability to make the types of investments necessary to implement technology solutions. [Pg.373]

Activated charcoal, protection from herbicide action, 50 Activated sludge systeiss, disadvantage, 172 Acute tests, pesticides, 342 Adjuvants, function, 233 Adoption theory, operators likely to Implement technology, 256 Advanced Genetic Sciences Company (AGS), 320... [Pg.353]

During the diffusion process control using the method menhoned earlier, the heat uniformity of the source of admixture has to be ensured. This is achieved by continuous mixing of the contents of the crucible. Thermocouple used to the measurements of the process temperature should be as close as possible to the glass substrate. The fulhllment of these conditions in the implemented technological processes was provided by a special handle made of silica glass (for details see [33] p.l82). [Pg.130]

For above mines, from sustainable development of mine area view point, resources optimization deployed model is the model which makes every mine balanced development by redistricting and allocating coal resource, human resources, equipment resource, at the same time, implementing technology reformation. [Pg.872]

The need to implement technology innovation and entrepreneurship education paradigms, such as project-based learning... [Pg.369]

Figure 3.9 Stereospecific polymerisation of isoprene (2-methyl-butadiene-l,3). The Russian industry has implemented technologies of c/s-l,4-polyisoprene synthesis with Ti-Al Ziegler-Natta catalysts (synthetic c/s-isoprene rubber SKI-3) and neodymium salts-based lanthanide catalysts SKI-5 grade synthetic rubber (TU 2294-051-16810126-96). SKI-3 rubbers contain up to 93 1% of as-1,4 links, while their content in SKI-5 grade rubber is 96 1%... Figure 3.9 Stereospecific polymerisation of isoprene (2-methyl-butadiene-l,3). The Russian industry has implemented technologies of c/s-l,4-polyisoprene synthesis with Ti-Al Ziegler-Natta catalysts (synthetic c/s-isoprene rubber SKI-3) and neodymium salts-based lanthanide catalysts SKI-5 grade synthetic rubber (TU 2294-051-16810126-96). SKI-3 rubbers contain up to 93 1% of as-1,4 links, while their content in SKI-5 grade rubber is 96 1%...
Of the 1,366,000 tons of caustic consumed in 2000, more than 60% of it was used in the pulp and paper industry. This demand may decline when the industry starts implementing technologies that reduce the demand for caustic [2]. [Pg.60]


See other pages where Technology implementation is mentioned: [Pg.1180]    [Pg.406]    [Pg.35]    [Pg.7]    [Pg.229]    [Pg.98]    [Pg.83]    [Pg.272]    [Pg.199]    [Pg.543]    [Pg.492]    [Pg.46]    [Pg.231]    [Pg.422]    [Pg.156]    [Pg.415]    [Pg.256]    [Pg.77]    [Pg.263]    [Pg.980]    [Pg.245]    [Pg.248]    [Pg.335]    [Pg.470]    [Pg.146]    [Pg.3]    [Pg.267]    [Pg.55]    [Pg.73]    [Pg.202]    [Pg.644]    [Pg.389]    [Pg.527]    [Pg.299]    [Pg.117]   


SEARCH



A Word About Technology Implementation

Clean technology implementing, steps

Implementation of process analytical technologies

Implementation technologies bleaches

Information technology implementation

Introduction to implementation of process analytical technologies (PATs) in the industrial setting

Process implementation technology pace

Technology implementation risk

Technology implementation risk management

Technology implementation risk providers

Testing technologies test implementation

© 2024 chempedia.info