Hydrosilylation functionalization reaction

Thermal cure system. The thermal cure system is based on a hydrosilylation addition reaction between vinyl-functionalized and silicon-hydrido functionalized polysiloxanes [32,33,35], Unsaturated organic groups react with a Si-H functionality in the presence of a platinum-based catalyst (Scheme 10). 

Similarly, poly(dimethylsiloxane) (pDMS), an inorganic polymer, has been incorporated into block copolymers using a functionalization reaction. Maty-jaszewski et al. used commercially available hydrosilyl or vinylsilyl terminated... 

In recent years the solid-phase hydrosilylation reaction was successfully employed for synthesis of hydrolytically stable surface chemical compounds with Si-C bonds. Of special interest is application of this method for attachment of functional olefins, in particular of acrolein and some chiral ligands. Such matrices can be used for subsequent immobilization of a wide range of amine-containing organic reagents and in chiral chromatography. 

The a,oo-difunctional PDMS is obtained by cationic polymerization of octamethyl-cyclotetrasiloxane (D4) in the presence of a known amount of tetramethyldisiloxane, acting as a functional transfer agent. Hydrosilylation reaction is carried out in toluene solution at 90 °C with a platinum catalyst. 

The reactivity of T8[OSiMe2H]g is dominated by its capacity to undergo hydrosilylation reactions with a wide variety of vinyl and allyl derivatives (Figure 30) that have subsequently mainly been used as precursors to polymers and nanocomposites by the introduction of reactive terminating functions as shown in Table 19. For example, T8[OSiMe2H]g has been modified with allyglycidyl ether, epoxy-5-hexene, and 1,2-cyclohexene-epoxide to give epoxy-terminated FOSS. These have then been treated with m-phenylenediamine, with polyamic acids or... 

Alcohol functions have also been introduced via hydrosilylation reactions, for example, the reaction of T8[OSiMe2H]8 with allyl alcohol and allyloxy ethanol (Table 19). In the first case, it has been postulated that the compound T8[OSiMe2 (CH2)30H]8 is not very stable due to back-biting of the -OH groups on the silicon corners (Figure 31). Nevertheless, it reacts with polymers such as polyvinyl pyrrolidone to give polymer hybrids (Table 19, entries 4 and 5). 

The hydrosilylation of carbonyl compounds by EtjSiH catalysed by the copper NHC complexes 65 and 66-67 constitutes a convenient method for the direct synthesis of silyl-protected alcohols (silyl ethers). The catalysts can be generated in situ from the corresponding imidazolium salts, base and CuCl or [Cu(MeCN) ]X", respectively. The catalytic reactions usually occur at room tanperature in THE with very good conversions and exhibit good functional group tolerance. Complex 66, which is more active than 65, allows the reactions to be run under lower silane loadings and is preferred for the hydrosilylation of hindered ketones. The wide scope of application of the copper catalyst [dialkyl-, arylalkyl-ketones, aldehydes (even enoUsable) and esters] is evident from some examples compiled in Table 2.3 [51-53],... 

There is much interest in the hydrosilylation of functionalized alkenes as a powerful synthetic tool [14]. Mesitylene-stabilized Pt nanoaggregates, obtained by reaction of Pt vapor and mesitylene, which have already been reported to be very active homogeneous catalysts in the hydrosilylation... 

Transition-metal chemistry is currently one of the most rapidly developing research areas. The record of investigation for compounds with metal silicon bonds is closely comparable to that for silicones it was in 1941 when Hein discovered the first metal silicon complex, followed by Wilkinson in 1956. A milestone in the development of this chemistry was Speier s discovery of the catalytic activity of nobel metal complexes in hydrosilylation reactions in 1977. Hydrosilylation is widely used in modem organic syntheses as well as in the preparation of organo functionalized silicones. Detailed investigations of the reaction mechanisms of various catalysts continue to be subject of intense research efforts. 

I. Ojima, The Hydrosilylation Reaction, in The Chemistry of Organic Silicon Compounds (S. Pa-tai, Z. Rappoport, Edits.), [The Chemistry of Functional Groups, (S. Patai, Edit.)], part 2, p. 1479 ff, Wiley, New York 1989. 

For the hydrosilylation reaction various rhodium, platinum, and cobalt catalysts were employed. For the further chain extension the OH-functionalities were deprotected by KCN in methanol. The final step involved the enzymatic polymerization from the maltoheptaose-modified polystyrene using a-D-glucose-l-phosphalc dipotassium salt dihydrate in a citrate buffer (pH = 6.2) and potato phosphorylase (Scheme 59). The characterization of the block copolymers was problematic in the case of high amylose contents, due to the insolubility of the copolymers in THF. 

Well-defined complicated macromolecular structures require complex synthetic procedures/techniques and characterization methods. Recently, several approaches leading to hyperbranched structures have been developed and will be the focus of this section. The preparation of hyperbranched poly(siloxysilane) has been reported [198] and is based on methylvinyl-bis(dimethyl siloxysilane), an A2B type monomer, and a progressive hydrosi-lylation reaction with platinum catalysts. An appropriate hydrosilylation reaction on the peripheral - SiH groups led to the introduction of polymeric chain (PIB, PEO) or functional groups (epoxy, - NH2) [199]. 

These transformations take advantage of the knowledge obtained from well-established intermolecular reactions (metal-catalyzed hydrosilylation, borostannylation, etc.) and operate in a way that functionalizes both ends of the two unsaturated partners (enyne in this section) in the same manner as in the parent intermolecular reaction.264,265... 

Alkyne hydrosilylation continues as a focus of current research. Despite the relative simplicity of the transformation, it is becoming increasingly clear that different catalysts often utilize unique mechanisms. In addition, the demands placed by the need to access vinylsilanes of differing substitution patterns, stereochemistries, and functional groups require a diverse, complementary set of methodologies. This discussion covers hydrosilylation reactions... 

A hydrosilylation/cyclization process forming a vinylsilane product need not begin with a diyne, and other unsaturation has been examined in a similar reaction. Alkynyl olefins and dienes have been employed,97 and since unlike diynes, enyne substrates generally produce a chiral center, these substrates have recently proved amenable to asymmetric synthesis (Scheme 27). The BINAP-based catalyst employed in the diyne work did not function in enyne systems, but the close relative 6,6 -dimethylbiphenyl-2,2 -diyl-bis(diphenylphosphine) (BIPHEMP) afforded modest yields of enantio-enriched methylene cyclopentane products.104 Other reported catalysts for silylative cyclization include cationic palladium complexes.105 10511 A report has also appeared employing cobalt-rhodium nanoparticles for a similar reaction to produce racemic product.46... 

For the conversion of silyl-carbon bond in the cyclization products into hydroxy-carbon bond, several functionalized hydrosilanes were examined (Scheme 27).84,84a,84b Of the hydrosilanes examined, benzhydryldimethylsilane (HSiMe2CHPh2) was found to be most enantioselective in the reaction of diene 86a to give the cyclization product 87a with 93% ee. The second highest enantioselectivity (91% ee) was observed with hydrosiloxane HSiMe2OSiPh2Bu-/. The cyclization-hydrosilylation with the HSiMe2CHPh2 and catalyst 88 was very successful... 

The chemistry of silicone halides was recently reviewed by Collins.13 The primary use for SiCU is in the manufacturing of fumed silica, but it is also used in the manufacture of polycrystalline silicon for the semiconductor industry. It is also commonly used in the synthesis of silicate esters. T richlorosilane (another important product of the reaction of silicon or silicon alloys with chlorine) is primarily used in the manufacture of semiconductor-grade silicon, and in the synthesis of organotrichlorosilane by the hydrosilylation reactions. The silicon halohydrides are particularly useful intermediate chemicals because of their ability to add to alkenes, allowing the production of a broad range of alkyl- and functional alkyltrihalosilanes. These alkylsilanes have important commercial value as monomers, and are also used in the production of silicon fluids and resins. On the other hand, trichlorosilane is a basic precursor to the synthesis of functional silsesquioxanes and other highly branched siloxane structures. 

The properties and applications of five commercially important groups of silanes those containing Si-H (hydride functional silanes), Si-X (halosilanes), Si-C (organosilanes), Si-OSi (siloxanes), and Si-OR (silicon esters) are thoroughly discussed by Arkles.14 As the role of functional siloxanes grows, so does the importance of the hydrosilylation reactions in this field. A broad introduction to hydrosilylation processes as applied to the synthesis of silicone precursors and to the functionalization of siloxanes is provided in the earlier editions of COMC, and,... 

---