Hydrogen halides production

The second example shows that such a reaction need not always lead to an uncharged system. If, instead of thiocarbene complexes, amino-carbene complexes are treated with hydrogen halides, products of saltlike character are isolable (66). One finds the halogen at the metal and the hydrogen at the removed carbene ligand, and one obtains iminium halo-genopentacarbonylmetalates ... 

For all the exothermic reactions between halogen atoms and hydrogen halides, product vibrational distributions have been obtained by infrared chemiluminescence measurements. Values of fv. are given in Table 1.9. In... 

MarkownikofT s rule The rule states that in the addition of hydrogen halides to an ethyl-enic double bond, the halogen attaches itself to the carbon atom united to the smaller number of hydrogen atoms. The rule may generally be relied on to predict the major product of such an addition and may be easily understood by considering the relative stabilities of the alternative carbenium ions produced by protonation of the alkene in some cases some of the alternative compound is formed. The rule usually breaks down for hydrogen bromide addition reactions if traces of peroxides are present (anti-MarkownikofT addition). 

Both resonance forms of the allylic carbocation from 1 3 cyclopentadiene are equivalent and so attack at either of the carbons that share the positive charge gives the same product 3 chlorocyclopentene This is not the case with 1 3 butadiene and so hydrogen halides add to 1 3 butadiene to give a mixture of two regioisomeric allylic halides For the case of electrophilic addition of hydrogen bromide at -80°C... 

When applied to the synthesis of ethers the reaction is effective only with primary alcohols Elimination to form alkenes predominates with secondary and tertiary alcohols Diethyl ether is prepared on an industrial scale by heating ethanol with sulfuric acid at 140°C At higher temperatures elimination predominates and ethylene is the major product A mechanism for the formation of diethyl ether is outlined m Figure 15 3 The individual steps of this mechanism are analogous to those seen earlier Nucleophilic attack on a protonated alcohol was encountered m the reaction of primary alcohols with hydrogen halides (Section 4 12) and the nucleophilic properties of alcohols were dis cussed m the context of solvolysis reactions (Section 8 7) Both the first and the last steps are proton transfer reactions between oxygens... 

The cleavage of ethers is normally earned out under conditions (excess hydrogen halide heat) that convert the alcohol formed as one of the original products to an alkyl halide Thus the reaction typically leads to two alkyl halide molecules... 

Phosphoms halides are subject to reactions with active hydrogen compounds and result in the elimination of hydrogen halide. They are convenient reagents in the synthesis of many esters, amides, and related compounds. However, because the involved hydrogen halide frequendy catalyzes side reactions, it is usually necessary to employ a hydrogen halide scavenger to remove the by-product. 

Bromomethyl-5-methylthiophene gives normal displacement products with amines but it is isomerized on attempted reaction with copper(I) cyanide (Scheme 59) 48MI30200. Whereas 2-hydroxymethylthiophene reacts normally with hydrogen halides to give 2-halomethylthiophenes, reaction of 2-hydroxymethylfuran (2-furfuryl alcohol) with hydrochloric acid results in formation of laevulinic acid (151). 2-Furfuryl alcohol derivatives are... 

The use of fire retardants in polymers has become more complicated with the realisation that more deaths are probably caused by smoke and toxic combustion products than by fire itself. The suppression of a fire by the use of fire retardants may well result in smouldering and the production of smoke, rather than complete combustion with little smoke evolution. Furthermore, whilst complete combustion of organic materials leads to the formation of simple molecules such as CO2, H2O, N2, SO2 and hydrogen halides, incomplete combustion leads to the production of more complex and noxious materials as well as the simple structured but highly poisonous hydrogen cyanide and carbon monoxide. 

The addition of hydrogen halides to alkenes has been studied from a mechanistic point of view over a period of many years. One of the first aspects of the mechanism to be established was its regioselectivity, that is, the direction of addition. A reaction is described as regioselective if an unsymmetrical alkene gives a predominance of one of the two possible addition products the term regiospecific is used if one product is formed... 

The third-order process presumably involves reaction of a complex formed between the alkene and hydrogen halide with the second hydrogen halide molecule, since there is little likelihood of productive termolecular collisions. 

It is not difficult to incorporate this result into the general mechanism for hydrogen halide additions. These products are formed as the result of solvent competing with halide ion as the nucleophilic component in the addition. Solvent addition can occur via a concerted mechanism or by capture of a carbocation intermediate. Addition of a halide salt increases the likelihood of capture of a carbocation intermediate by halide ion. The effect of added halide salt can be detected kinetically. For example, the presence of tetramethylammonium... 

The primary product of hypohalite photolysis is a 1,5-halohydrin, the stability of which increases on passing from iodo- to bromo- to chloro-hydrins. If spontaneous elimination of hydrogen halide does not occur, the halohydrins can be converted into tetrahydrofurans by base treatment. In several instances it has been possible to isolate the intermediate... 

The reaction of an alcohol with a hydrogen halide is a substitution. A halogen, usually chlorine or bromine, replaces a hydroxyl group as a substituent on carbon. Calling the reaction a substitution tells us the relationship between the organic reactant and its product but does not reveal the mechanism. In developing a mechanistic picture for a particular reaction, we combine some basic principles of chemical reactivity with experimental observations to deduce the most likely sequence of steps. 

Cleavage of alkyl aryl ethers by hydrogen halides always proceeds so that the alkyl-oxygen bond is broken and yields an alkyl halide and a phenol as the final products. Either hydrogen bromide or hydrogen iodide is nonnally used. 

It is common practice to refer to the molecular species HX and also the pure (anhydrous) compounds as hydrogen halides, and to call their aqueous solutions hydrohalic acids. Both the anhydrous compounds and their aqueous solutions will be considered in this section. HCl and hydrochloric acid are major industrial chemicals and there is also a substantial production of HF and hydrofluoric acid. HBr and hydrobromic acid are made on a much smaller scale and there seems to be little industrial demand for HI and hydriodic acid. It will be convenient to discuss first the preparation and industrial uses of the compounds and then to consider their molecular and bulk physical properties. The chemical reactivity of the anhydrous compounds and their acidic aqueous solutions will then be reviewed, and the section concludes with a discussion of the anhydrous compounds as nonaqueous solvents. 

In the following procedure, use is made of the basic character of epoxides. In the presence of phosphonium salts, ethylene oxide removes hydrogen halide and the alkylidenetriphenylphosphorane is produced. If a suitable carbonyl compound is present in the reaction mixture, its reaction with the in situ generated phosphorane proceeds readily to give the Wittig product. 

The most common hydrogen halides are HF (U.S. production = 3 X 108 kg/yr) and HC1 (3 X 109 kg/yr). They are most familiar as water solutions, referred to as hydrofluoric acid and hydrochloric acid, respectively. Recall (Chapter 13) that hydrofluoric acid is weak, incompletely dissociated in water, whereas HCl is a strong acid. 

The addition of hydrogen halides to simple alkenes, in the absence of peroxides, takes place by an electrophilic mechanism, and the orientation is in accord with Markovnikov s rule. " When peroxides are added, the addition of HBr occurs by a free-radical mechanism and the orientation is anti-Markovnikov (p. 985). It must be emphasized that this is true only for HBr. Free-radical addition of HF and HI has never been observed, even in the presence of peroxides, and of HCl only rarely. In the rare cases where free-radieal addition of HCl was noted, the orientation was still Markovnikov, presumably beeause the more stable product was formed. Free-radical addition of HF, HI, and HCl is energetically unfavorable (see the discussions on pp. 900, 910). It has often been found that anti-Markovnikov addition of HBr takes place even when peroxides have not been added. This happens because the substrate alkenes absorb oxygen from the air, forming small amounts of peroxides... 

These reactions give products similar to those described in 8.3.2.1. Transition-mclal hydrido complexes react with a halogen derivative of a group-IB metal to form a hydrogen halide and the required metal-metal bond ... 

Further experimental details, n.m.r., and i.r. data on the compounds, N P F2 (NMe2)a (n = 3—6, x = 1—3) and their reaction products with hydrogen halides, already reported in preliminary form, have been given. Dimethylamine and MesSiNMe2 form bisdimethylamino-deriva-tives, predominantly with non-geminal structures. In the tetramer series, the bisdimethylamino-derivative has structure (40), rather than (41). The... 

As a consequence of facile homolytic cleavages, sulfonyl halides (I > Br > Cl F unsuitable) are able to add to unsaturated C—C systems. To prevent (or reduce) competing polymerizations, the additions of sulfonyl chlorides have been recommended to be carried out in the presence of copper(I/II) salts (Asscher-Vofsi reaction ). Comprehensive surveys have been published on the resulting j8-halogeno sulfones (or their vinyloguous compounds) as well as on their dehalogenation products (vinyl sulfones, 1-sulfonyl-l, 3-dienes, etc.). Table 5 reviews a series of sulfonyl halide additions and facile hydrogen halide eliminations. 

Polycondensation pol5mers, like polyesters or polyamides, are obtained by condensation reactions of monomers, which entail elimination of small molecules (e.g. water or a hydrogen halide), usually under acid/ base catalysis conditions. Polyolefins and polyacrylates are typical polyaddition products, which can be obtained by radical, ionic and transition metal catalyzed polymerization. The process usually requires an initiator (a radical precursor, a salt, electromagnetic radiation) or a catalyst (a transition metal). Cross-linked polyaddition pol5mers have been almost exclusively used so far as catalytic supports, in academic research, with few exceptions (for examples of metal catalysts on polyamides see Ref. [95-98]). 

Surface-mediated addition of HC1 or HBr can be carried out in the presence of silica or alumina.150 The hydrogen halides can be generated from thionyl chloride, oxalyl chloride, oxalyl bromide, phosphorus tribromide, or acetyl bromide. The kinetic products from HC1 and 1-phenylpropyne result from syn addition, but isomerization to the more stable Z-isomer occurs upon continued exposure to the acidic conditions. 

---