Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Hydrogen from aqueous solutions

Lee SG, Lee SW, Lee HI (2001) Photocatalytic production of hydrogen from aqueous solution containing ChT as a hole scavengers.Appl Catal A Gen 207 173-181... [Pg.420]

It is interesting to note that in the photochemical evolution of hydrogen from aqueous solutions of Fe+2 ions (17) H atoms appear as intermediate, but preceding formation of e aq could not be proved. [Pg.241]

Electrolytic processes. Because of the positive oxidation potential for plutonium metal to displace hydrogen from aqueous solution, as shown in Table 9.7, nonaqueous solutions such as fused salts must be used for the electrodeposition of plutonium metal. One process involves the electrolysis of a molten equimolar mixture of LiCl-KCl containing 30 w/o FuQs. The melt is contained in a MgO-TiOi crucible heated to 950 C, with an anode through which chlorine gas can be introduced... [Pg.447]

Lead formate separates from aqueous solution without water of crystallisation. It can therefore be used for the preparation of anhydrous formic acid. For this purpose, the powdered lead formate is placed in the inner tube of an ordinary jacketed cond ser, and there held loosely in position by plugs of glass-wool. The condenser is then clamped in an oblique position and the lower end fitted into a receiver closed with a calcium chloride tube. A current of dry hydrogen sulphide is passed down the inner tube of the condenser, whilst steam is passed through the jacket. The formic acid which is liberated... [Pg.114]

Sa.lts Salting out metal chlorides from aqueous solutions by the common ion effect upon addition of HCl is utilized in many practical apphcations. Typical data for ferrous chloride [13478-10-9] FeCl2, potassium chloride [7447-40-7] KCl, and NaCl are shown in Table 9. The properties of the FeCl2-HCL-H2 0 system are important to the steel-pickling industry (see Metal SURFACE TREATMENTS Steel). Other metal chlorides that are salted out by the addition of hydrogen chloride to aqueous solutions include those of magnesium, strontium, and barium. [Pg.442]

Electrowinning from Aqueous Solutions. Electrowinriing is the recovery of a metal by electrochemical reduction of one of its compounds dissolved in a suitable electrolyte. Various types of solutions can be used, but sulfuric acid and sulfate solutions are preferred because these are less corrosive than others and the reagents are fairly cheap. From an electrochemical viewpoint, the high mobiUty of the hydrogen ion leads to high conductivity and low ohmic losses, and the sulfate ion is electrochemicaHy inert under normal conditions. [Pg.174]

BeryUium chloride [7787-47-5], BeCl2, is prepared by heating a mixture of beryUium oxide and carbon in chloride at 600—800°C. At pressures of 2.7—6.7 Pa (0.02—0.05 mm Hg) beryllium chloride sublimes at 350—380°C. It is easily hydrolyzed by water vapor or in aqueous solutions. BeryUium chloride hydrate [14871-75-1] has been obtained by concentrating a saturated aqueous solution of the chloride in a stream of hydrogen chloride. ChloroberyUate compounds have not been isolated from aqueous solutions, but they have been isolated from anhydrous fused salt mixtures. [Pg.75]

Reagents similai to those used in the analysis of chloiine are commonly employed in the quantitation of gaseous and aqueous chloiine dioxide as well as its reaction coproducts chlorine, chlorite, and chlorate. The volatihty of the gas from aqueous solutions as well as its reactivity to light must be considered for accurate analysis. Other interferences that must be taken into account include other oxidizers such as chloramine, hydrogen peroxide, permanganate, and metal impurities such as ferrous and ferric iron. [Pg.484]

A hydrate CO2.8H2O can be crystallized from aqueous solutions at 0° and p C02) 45 atm. There is also evidence for a hydrogen-bonded sesquicarbonate ion, H3C20s this was originally suggested to have the sandwich... [Pg.310]

Whether the adsorbed hydrogen is produced from the gas phase or from aqueous solution, it appears that the presence of hydrogen atoms distorts the crystal structure of the metal surface, and this results in a surface solubility which is higher than that of the bulk. The depth of this distortion is not clear, but it seems possible that the distorted zone may play an important part in initiating brittle-fracture processes. [Pg.1231]

Table 21.12 Tafel constants for hydrogen evolution from aqueous solution ... Table 21.12 Tafel constants for hydrogen evolution from aqueous solution ...
On account of the fact that the electrode potential of molybdenum is more negative than the discharge potential of hydrogen, principle difficulties arise to cathodically electrodeposit molybdenum chalcogenide films from aqueous solutions. Theoretically, the deposition of pure molybdenum by electrolytic reduction of molybdates in acidic aqueous solutions is possible according to the reaction... [Pg.110]

It has been pointed out that metals residing below the position held by manganese (and, therefore, much below hydrogen) in the electrochemical series (Table 6.11) cannot be electrodeposited from aqueous solutions of their salts. These metals are called base metals or reactive metals and can be electrodeposited only from nonaqueous electrolytes such as solutions in organic solvents and molten salts. As with an aqueous electrolyte, there is a minimum voltage which is required to bring about the electrolysis of a molten salt. [Pg.694]

Prochiral derivatives of propenoic acid were reduced by hydrogen transfer from aqueous solutions of M[HCOO] (M = K+, Na+ and [NH4]+) catalyzed by Rh1 complexes of (117) or the tetrasulfonated cyclobutanediop (132) 345 Aldehydes were reduced in a phase transfer catalytic system having [RuCl2(PPh3)3] as the catalyst in the organic phase (for example chlorobenzene) and the hydrogen donor (Na-methanoate) in the aqueous phase.346... [Pg.121]

Relatively little attention has been devoted to the direct electrodeposition of transition metal-aluminum alloys in spite of the fact that isothermal electrodeposition leads to coatings with very uniform composition and structure and that the deposition current gives a direct measure of the deposition rate. Unfortunately, neither aluminum nor its alloys can be electrodeposited from aqueous solutions because hydrogen is evolved before aluminum is plated. Thus, it is necessary to employ nonaqueous solvents (both molecular and ionic) for this purpose. Among the solvents that have been used successfully to electrodeposit aluminum and its transition metal alloys are the chloroaluminate molten salts, which consist of inorganic or organic chloride salts combined with anhydrous aluminum chloride. An introduction to the chemical, electrochemical, and physical properties of the most commonly used chloroaluminate melts is given below. [Pg.277]

However, an important problem arises during the peroxidative removal of phenols from aqueous solutions PX is inactivated by free radicals, as well as by oligomeric and polymeric products formed in the reaction, which attach themselves to the enzyme (Nazari and others 2007). This suicide peroxide inactivation has been shown to reduce the sensitivity and efficiency of PX. Several techniques have been introduced to reduce the extent of suicide inactivation and to improve the lifetime of the active enzyme, such as immobilization. Moreover, Nazari and others (2007) reported a mechanism to prevent and control the suicide peroxide inactivation of horseradish PX by means of the activation and stabilization effects of Ni2+ ion, which was found to be useful in processes such as phenol removal and peroxidative conversion of reducing substrates, in which a high concentration of hydrogen peroxide may lead to irreversible enzyme inactivation. [Pg.115]

The water-soluble analogue of Wilkinson s catalyst, [RhCl(TPPMS)3] [TPPMS = PPh2(C6H4S03Na)], prepared in situ from Rh(/<-Cl)(diene)]2 and TPPMS, reacts with hydrogen in aqueous solution to yield [RhH(TPPMS)3], instead of [RhH2(TPPMS)3], according to Eq. (6) ... [Pg.14]


See other pages where Hydrogen from aqueous solutions is mentioned: [Pg.278]    [Pg.190]    [Pg.509]    [Pg.172]    [Pg.90]    [Pg.46]    [Pg.278]    [Pg.190]    [Pg.509]    [Pg.172]    [Pg.90]    [Pg.46]    [Pg.394]    [Pg.281]    [Pg.32]    [Pg.293]    [Pg.49]    [Pg.468]    [Pg.90]    [Pg.439]    [Pg.254]    [Pg.79]    [Pg.55]    [Pg.18]    [Pg.295]    [Pg.300]    [Pg.760]    [Pg.1251]    [Pg.1268]    [Pg.1379]    [Pg.165]    [Pg.21]    [Pg.119]    [Pg.201]    [Pg.119]    [Pg.54]    [Pg.653]    [Pg.1268]    [Pg.114]    [Pg.27]   
See also in sourсe #XX -- [ Pg.221 ]




SEARCH



From aqueous

Hydrogen aqueous solutions

Hydrogen solution

© 2024 chempedia.info