Hydride hydroformylation

More recently, during research aimed at supporting the highly linear selective hydroformylation catalyst [Rh(H)(Xantphos)(CO)2] onto a silica support, the presence of a cationic rhodium precursor in equilibrium with the desired rhodium hydride hydroformylation catalyst was observed. The presence of this complex gave the resulting catalyst considerable hydrogenation activity such that high yields of linear nonanol could be obtained from oct-1-ene by domino hy-droformylation-reduction reaction [75]. 

These reactions are also quite sensitive to steric factors, as shown by the fact that if 1-butene reacts with di(j iAisoamyl)borane the initially formed product is 99% substituted in the 1-position (15) compared to 93% for unsubstituted borane. Similarly, the product obtained from hydroformylation of isobutylene is about 97% isoamyl alcohol and 3% neopentyl alcohol (17). Reaction of isobutylene with aluminum hydride yields only triisobutjlaluininum. 

Remarkably few examples of this type of ring construction are available. The cobalt carbonyl hydride catalyzed hydroformylation of A/,A/ -diallylcarbamates has provided 3-pyrrolidinones (Scheme 61a) (81JOC4433). The pyrrole synthesis shown in Scheme 61b depends on Michael addition of ethyl a-lithioisocyanoacetate to ethyl a-isocyanocrotonate (77LA1174). 

Llewellyn, Green, and Cowley isolated the Co-H complex [CoH(CO)3(IMes)] 26, a relatively stable complex under inert conditions [31], The authors examined the hydroformylation activity of 1-octene with Co-hydride complex 26. With 8 atm of syngas (H /CO) at 50°C for 17 h and 1 mol% 26, the conversion to aldehyde products was 47% with a l b of 0.78. However, 83% of the product was the internal aldehyde 2-methyl-octanal, indicating isomerisation competed with hydroformylation and the rate of isomerisation occurred faster than hydroformylation. 

A catalyst used for the u-regioselective hydroformylation of internal olefins has to combine a set of properties, which include high olefin isomerization activity, see reaction b in Scheme 1 outlined for 4-octene. Thus the olefin migratory insertion step into the rhodium hydride bond must be highly reversible, a feature which is undesired in the hydroformylation of 1-alkenes. Additionally, p-hydride elimination should be favoured over migratory insertion of carbon monoxide of the secondary alkyl rhodium, otherwise Ao-aldehydes are formed (reactions a, c). Then, the fast regioselective terminal hydroformylation of the 1-olefin present in a low equilibrium concentration only, will lead to enhanced formation of n-aldehyde (reaction d) as result of a dynamic kinetic control. 

Ojima, I. Eguchi, M. Tzamarioudaki, M. Transition Metal Hydrides Hydrocarboxylation, Hydroformylation, and Asymmetric Hydrogenation. In Wilkinson, G. Stone, F. B. A. Abel, E. W., Eds., Comprehensive Organometallic Chemistry 2, Vol. 12, Pergamon, Oxford, 1995, Chapter 2. 

The existence of two different rhodium species co-existing on the silica support can be used as an advantage by controlling their relative amount. Under standard hydroformylation conditions, the cationic species and the neutral hydride complex are both present in significant amounts. Hence hydroformylation and hydrogenation will both proceed under a CO/H2 atmosphere. Indeed a clean one-pot reaction of 1-octene to 1-nonanol was performed, using the supported catalyst for a hydroformylation-hydrogenation cascade reaction. 98 % of the 1-octene was converted in the... 

The compound [HRh(C0)(TPPTS)3] is a "precatalyst" and dissociates to the 16e species [HRh(C0)(TPPTS)2]. This oxo-active complex initiates the hydroformylation cycle. Under oxo conditions (presence of CO/H2, H20, and a surplus of TPPTS) the hydroxo complex [(HO)Rh(CO)(TPPTS)2] may be formed and again reversibly converted to [HRh(C0)(TPPTS)3] (equilibrium lies almost completely towards the hydride). However, higher carbon monoxide partial pressures may cause the displacement of TPPTS by CO according to Equation 5.8. 

Many research groups have attributed the isomerization to a series of additions and eliminations of a cobalt carbonyl hydride. However, it has been shown that aldehydes may be found with formyl groups attached to a carbon atom other than the two of the double bond even under non-isomerizing conditions. Piacenti and co-workers (44, 45) studied the hydroformylation of [l-14C]propylene and of a>-deuterated a-olefins. Even for a-olefins with chain lengths up to C6, the formyl group was attached to all possible carbon atoms in the product mixture. However, in the deuterated experiments, deuterium was present only on carbons 2, 3, and a) of the resulting aldehydes. These results were explained by pro-... 

The substitution of trialkylphosphine for carbon monoxide also makes the metal-hydrogen bond more hydridic in character and results in increased reduction of the initially formed aldehyde to alcohol. Slaugh and Mullineaux (52) compared Co2(CO)g and [Co2(CO)8 + 2PBu3], each at reaction conditions of 150°C, 500 psi, H2/CO I.0, for the hydroformylation of 1-pentene. The products consisted of hexyl aldehydes and hexyl alcohols in the ratios of 95 5 and 30 70, respectively. In a negative aspect of the reaction, they observed 23% hydrogenation of alkene to alkane at a reaction temperature of 195°C with the phosphine-modified catalyst. Tucci (54) reported less alkane formation (4-5%) under more favorable reaction conditions (I60°C, H2/CO 1.2, 1 hour reaction time). 

The mechanism of the hydroformylation reaction suggests that aldehyde regioselectivity is determined in the hydride addition step, which converts the five-coordinated H(alkene)-Rh(CO)L2 into either a primary or a secondary four-coordinated (alkyl)Rh(CO)L2. For the linear rhodium alkyl species, this... 

Pettit and coworkers—metal hydride intermediates by weak base attack over Fe carbonyl catalysts. Pettit et al.ls approached the use of metal carbonyl catalysts for the homogeneous water-gas shift reaction from the standpoint of hydroformyla-tion by the Reppe modification.7 In the typical hydroformylation reaction, an alkene is converted to the next higher aldehyde or alcohol through reaction of CO and H2 with the use of a cobalt or rhodium carbonyl catalyst. However, in the Reppe modification, the reduction is carried out with CO and H20 in lieu of H2 (Scheme 6) ... 

In 2004 Caporali investigated the hydroformylation of 1-hexene and cyclohexene using HRh(CO)(PPh3)3 [61]. The collected data indicated that the rate-determining step in the hydroformylation cycle depends upon the structure of the olefin. With an alpha-olefin like 1-hexene, the slowest step seems to be the hydrogenolysis of the acyl rhodium complex. In the presence of cyclohexene as a model for an internal olefin, the rate-determining step is the reaction of the olefin with the rhodium hydride complex (intermediate II in Fig. 6). 

However, considerable amounts of 2,3-dihydrofuran 50 and tetrahydro-furan-2-carbaldehyde 53 were present because of an isomerization process. The isomerization takes place simultaneously with the hydroformylation reaction. When the 2,5-dihydrofuran 46 reacts with the rhodium hydride complex, the 3-alkyl intermediate 48 is formed. This can evolve to the 2,3-dihydrofuran 50 via /3-hydride elimination reaction. This new substrate can also give both 2- and 3-alkyl intermediates 52 and 48, respectively. Although the formation of the 3-alkyl intermediate 48 is thermodynamically favored, the acylation occurs faster in the 2-alkyl intermediates 52. Regio-selectivity is therefore dominated by the rate of formation of the acyl complexes. The modification of the phosphorus ligand and the conditions of the reaction make it possible to control the regioselectivity and prepare the 2- or 3-substituted aldehyde as the major product [78]. As far as we know, only two... 

Scheme 8.4 Catalytic cycle for the hydroformylation of C=C bonds using HRh(CO)2(PPh3)2. Step 1, ligand dissociation step 2, ligand association step 3, /J-hydride transfer step 4, ligand dissociation step 5, CO insertion step 6, oxidative addition of H2 steP 2, reductive elimination step 8, ligand association...

Recently proof has been reported for a heterometallic bimolecular formation of aldehyde from a manganese hydride and acylrhodium species [2], Phosphine free, rhodium carbonyl species show the same kinetics as the cobalt system, i.e. the hydrogenolysis of the acyl-metal bond is rate-determining. Addition of hydridomanganese pentacarbonyl led to an increase of the rate of the hydroformylation reaction. The second termination reaction that takes place according to the kinetics under the reaction conditions (10-60 bar, 25 °C) is reaction (3). The direct reaction with H2 takes place as well, but it is slower on a molar basis than the manganese hydride reaction. 

Figure 7.3 gives an overview of the reactions involved in the hydroformylation of internal alkenes to linear products. It has been suggested that cobalt, once attached to an alkene, runs along the chain until an irreversible insertion of CO occurs. Thus, the alkene does not dissociate from the cobalt hydride during the isomerisation process. There is no experimental support for a clear-cut proof for this mechanism. In alkene polymerisation reactions this type of chain running has been actually observed. 

The tetranuclear and trinuclear clusters will only be observed at low pressures [8], but all other species are very common under hydroformylation conditions. Complex 4 is an ionic complex that is formed in polar solvents [9] and even hexa-solvated, divalent cobalt species may form as the cation. Under practical conditions both the dimers and the hydrides are observed, thus depending on the hydrogen pressure there will be more or less of the hydride present. 

The insertion of CO is in many instances thermodynamically unfavourable the thermodynamically most favourable product in hydroformylation and carbonylation reactions of the present type is always the formation of low or high-molecular weight alkanes or alkenes, if chain termination occurs via (3-hydride elimination). The decomposition of 3-pentanone into butane and carbon monoxide shows the thermodynamic data for this reaction under standard conditions. Higher pressures of CO will push the equilibrium somewhat to the left. 

The rhodium complex with bis(diphenylphosphino)phenoxazine was immobilized on silica using the sol-gel technique or by a direct grafting to commercially available silica [127]. Under standard hydroformylation conditions (CO/H2 atmosphere), a neutral hydridic complex (57) and cationic species (58) (Scheme 4.35) coexist on the support and act as a hydroformylation/hydrogenation sequence catalyst, giving selectively 1-nonanol from 1-octene 98% of 1-octene were converted to mainly linear nonanal which was subsequently hydrogenated to 1-nonanol. The... 

---