Heterogeneous catalytic processes catalyst testing

This catalytic system was very flexible because by simple modification of the reaction conditions it was possible to prepare oxidized polymers with the desired level of carboxyl and carbonyl functions. No waste was formed because the process did not involve any acids, bases or buffer solutions. The incipient wetness process is very easy to scale up. Hydrophilic starch was prepared in batches of 150 L and incorporated successfully in paint formulations. Good results were also obtained with in vitro and in vivo tests for cosmetic formulation. Interestingly, this is a rather unique example of a heterogeneous catalytic process involving a soluble catalyst and a solid substrate. 

This complexity determines that investigations on heterogeneous photo-catalytic processes sometimes report information only on dark adsorption and use this information for discussing the results obtained under irradiation. This extrapolation is not adequate as the characteristics of photocatalyst surface change under irradiation and, moreover, active photoadsorption centers are generated. Nowadays very effective methods allow a soimd characterization of bulk properties of catalysts, and powerful spectroscopies give valuable information on surface properties. Unfortunately information on the photoadsorption extent under real reaction conditions, that is, at the same operative conditions at which the photoreactivity tests are performed, are not available. For the cases in which photoreaction events only occur on the catalyst surface, a critical step to affect the effectiveness of the transformation of a given compound is to understand the adsorption process of that compound on the catalyst surface. The study of the adsorbability of the substrate allows one to predict the mechanism and kinetics that promote its photoreaction and also to correctly compare the performance of different photocatalytic systems. 

To address these limitations, additional -tests have been designed. In one experiment called the "three-phase test," a substrate is attached to an insoluble support, such as a polymer. If the catalyst is also a solid, then the supported substrate reacts much more slowly than the analogous soluble substrate, but if the catalyst is dissolved, then the two substrates will react with more similar rates. The polymer-bonded substrate must be swollen in a solvent which is compatible with the homogeneous catalyst. Applications of this test for homogeneity are Illustrated in Equation 10.54. The virtue of this test is that it is based on the catalytic process itself, rather than on detection of hypothetical catalysts. A variation of this theme involves the use of polymeric catalyst poisons, such as polythiols. These were found to have no effect on heterogeneous catalysts but to retard homogeneous catalysts.- ... 

The catalytic behavior of enzymes in immobilized form may dramatically differ from that of soluble homogeneous enzymes. In particular, mass transport effects (the transport of a substrate to the catalyst and diffusion of reaction products away from the catalyst matrix) may result in the reduction of the overall activity. Mass transport effects are usually divided into two categories - external and internal. External effects stem from the fact that substrates must be transported from the bulk solution to the surface of an immobilized enzyme. Internal diffusional limitations occur when a substrate penetrates inside the immobilized enzyme particle, such as porous carriers, polymeric microspheres, membranes, etc. The classical treatment of mass transfer in heterogeneous catalysis has been successfully applied to immobilized enzymes I27l There are several simple experimental criteria or tests that allow one to determine whether a reaction is limited by external diffusion. For example, if a reaction is completely limited by external diffusion, the rate of the process should not depend on pH or enzyme concentration. At the same time the rate of reaction will depend on the stirring in the batch reactor or on the flow rate of a substrate in the column reactor. 

---