Heavy objects

Computed Tomography for very large and heavy objects is a demanding challenge for the manufacturer and his subsuppliers in many respects, especially with regard to the strongest advantages of CT ... 

Taking into account that size and weight can change tremendously fi-om one object to the next, it is obvious that the CT- system had to be build in a very versatile but robust manner. For example heavy objects have to be moved very carefully, whereas small objects have to be measured as fast as possible and as accurate as possible. For that reason the turntable is equipped with an instrument, which limits the velocity, if the weight of the object is above a preselectable threshold. 

The successes of the traditional approach have largely been obtained in the area of occupational safety, where statistical evidence is readily available concerning the incidence of injuries to individuals in areas such as tripping and falling accidents. Such accidents are amenable to behavior modification approaches because the behaviors that give rise to the accident are under the direct control of the individual and are easily predictable. In addition, the nature of the hazard is also usually predictable and hence the behavior required to avoid accidents can be specified explicitly. For example, entry to enclosed spaces, breaking-open process lines, and lifting heavy objects are known to be potentially hazardous activities for which safe methods of work... 

This expression, in the form a = F/m, tells us that a stronger force is required to accelerate a heavy object by a given amount than to accelerate a lighter object by the same amount. 

With this exception, regular enamel sinks, preferably of the cast iron type, are satisfactory for most laboratory use. They should be mounted in such a manner that they may be removed and replaced in case of physical damage. Sooner or later somebody wiU drop a heavy object into the sink and crack the enamel. These sinks are very resistant to staining and easy to keep clean. 

Sometimes there is not enough tubing left beyond the scratch to hold in the hand, so that the normal method for small tubing (p. 49) cannot be used. The easiest method to use in this case is to scratch the tube and then place it on the top of a triangular file, with the scratch opposite to and above the edge of the file (Figure IQ. The end of the tube is then knocked off by giving it a sharp blow with a heavy object. 

Subsea pipeline emergency isolation valves for offshore facilities are provided where a risk analysis indicated topside isolation may be considered vulnerable. They should be protected from ship impacts, anchor dragging, flammable liquid spills and heavy objects that may be dropped from the offshore facility. 

When fluidized, the particles are suspended in the gas, and the fluidized mass (called a fluidized bed) has many properties of a liquid. Like a liquid, the fluidized particles seek their own level and assume the shape of the containing vessel. Large, heavy objects sink when added to the bed, and light particles float. 

D—The hot-air balloon rises because it has a lower density than air. Less dense objects will float on more dense objects. In other words lighter objects will float on heavy objects. 

Most industrial chemical complexes have numerous windows on the outside of buildings, in doors, and in interior offices. In addition, many facilities have glass doors or other glass structures, such as glass walls or display cases. These glass objects are potentially vulnerable to shattering when heavy objects are thrown or launched at them,... 

Dismantling operations will create materials that are heavy and unwieldy. Handling heavy objects will create a risk of damaging structures and equipment still in operation or intended for abandonment in place. Workers could also incur risks. The placement and use of lifting equipment must be carefully planned to minimize the possibility of boom overload, collision of a boom or load with fixed objects, and contact with energized electrical distribution lines. 

The reason a heavy object floats on water is because in order to sink, it must overcome the surface forces. This clearly shows that, at any liquid surface, there exists a tension (surface tension) that needs to be broken when any contact is made between the liquid surface and the material (here the steel needle). A liquid can form three types of interfaces ... 

Primitive cold weapons can be subdivided into two major categories shock and missile, of which missiles could be operated by hand or mechanically. The earliest shock weapon was a heavy club, while the first missile was a stone or other heavy object hurled by hand. 

Accdg to MUNIZIONAMENTO ITALIANO (Addnl Ref C), the terms proietto o proiettile are used referring to any heavy object which is fired from a gun and produces a destructive effect at a distance. This object may be solid (like an AP Bullet) or hollow (like HE Projectile) loaded with a bursting charge expl (carica di scoppio) which is detonated by an initiation train... 

Practice Find a friend who is willing to act as the dummy and be dragged over grass. Or you can load up a sheet with bulky, heavy objects (tires, bags of sand) to simulate the awkwardness of the human body. You can drag this around as much as you want without worrying about scrapes, nicks, and finding new friends. 

In some factories the number of loose articles (e.g. bottles, buckets, thermometers) allowed in each house is also limited accidents have been caused by heavy objects dropping or falling. 

Rough Balances or Platform Scales. These are to be used for weighing out materials approximately for preparations and qualitative experiments and for weighing heavy objects of more than 100 grams. 

Grab something that is unlikely to move when you hit it with a marhle such as a roll of masking tape or a paperweight. Any heavy object will do, hut I ll assume from here on out that you re using a roll of masking tape. Also, grab a couple of marbles and find a smooth surface. 

A lever is a simple machine that consists of a rigid bar supported at one point, known as the fulcrum. A force called the effort force is applied at one point on the lever in order to move an object, known as the resistance force, located at some other point on the lever. A common example of the lever is the crow bar used to move a heavy object such as a rock. To use the crow bar, one end is placed under the bar, which is supported at some point (the fulcrum) close to the rock. A person then applies a force at the opposite end of the crow bar to lift the rock. A lever of the type described here is a first-class lever because the fulcrum is placed between the applied force (the effort force) and the object to be moved (the resistance force). 

The method used to remove the objects will depend on their size and fragility. Ordinary objects may be brought up in plastic or net bags. Heavy objects may be lifted with chains and pulleys or with balloon-like air bags. These bags contain a small amount of compressed air that enables them to expand and rise to the surface as the water pressure decreases. 

Lay them over the row or bed, leaving enough slack to allow plants to grow underneath. Anchor the edges with soil, rocks, boards, bricks, or other heavy objects. You can make or buy hoop supports for delicate crops like baby lettuce that may be damaged by abrasion. Later, remove the covers temporarily to thin plants, weed, or harvest. In the spring, periodically check for aphid infestations. 

If a thicker fuse is wanted, the coated string is folded along its length once or twice, depending on how thick you want it. Then a heavy object is attached to one end and spun, twisting the strands. The other end of the fuse and the heavy object arc secured so. the strands will remain twisted until dry. 

---