Material approximations

Raw material Approximate size analysis of raw material, less than indicated )J.m (mesh) Moisture content of balled product, wt % H2O... 

Content approximately 12,000 materials from 140 manufacturers, approximately 40 measured properties for each material, approximately 15 product class values per material in the absence of experimental values... 

If eq. (l) were applicable to other materials, approximate values of the maximum growth rates could be obtained by scaling with (T / ). Accordingly, we estimate maximum rates of 400 m/s for nickel and 430 m/s for silicon. Interface velocities of 50 m/s have been measured for Ni... 

Electrode pressure on the sample material approximately corresponded to the pressure used in a practical EC in its operational mode and was equal to 8 kgf-cm 2 (this pressure was applied for purposes of minimization of particle contact resistance). 

Permeation testing of the Fe-/Co-based metallic glass alloys demonstrated permeabilities slightly lower than Pd/Pd-alloys however, the cost savings afforded by these materials (approximately 650X lower) warrants further study/evaluation of this class of materials. 

Oceanic crust The mass of basaltic material, approximately 5-7 km thick, which underlies the ocean basins. 

Holcomb (2) reports that through 1976, commercial burial grounds had disposed of 951,468 kilograms (kg) of source material, approximately 4 million curies of by-product material, and 1,667 kg of special nuclear material as well as 113 kg of TRU waste ( 3). The DOE sites, according to Duguid ( 1), contain 7,292,124 kg of source material and 11 million curies of byproduct as well as more than 700 kg of TRU waste. An additional 6 million liters of a waste-cement grout slurry has been injected into hydrofractured shale at the Oak Ridge disposal site in Tennessee. 

Reaction conditions 0.2N aqueous NaOH (2 mole equivalents alkali), 70°C., reaction period of 25 hours. Oxygen consumption 3.2 gram-atoms oxygen per mole starting material, approximately 8.0 gram-atoms oxygen per mole reacted material. 

The human femur is a composite material approximately 70% of its matrix is inorganic hydroxyapatite, 20% is organic, and 10% is water (Kaplan... 

TABLE 7.1 Current and Potential Fire-Retardant Fillers Candidate Material Approximate Onset Approximate Enthalpy ... 

Rough Balances or Platform Scales. These are to be used for weighing out materials approximately for preparations and qualitative experiments and for weighing heavy objects of more than 100 grams. 

A typical cell employs a sheet of the polymeric material approximately 10 mils thick. A thin catalyst film is pressed on each face of this sheet to form the anode and cathode electrodes. Since the electrolyte is solid, the electrodes do not have to perform any structural or containment functions. Consequently, they are very simply designed for the sole function of providing sufficient catalytic activity to achieve desired performance levels. 

There is another aspect of the return to real space that is significant chemists can sketch the DOS of any material, approximately, intuitively. All... 

Material Approximate particle size Feed solids cone, wt % Filtration rate i kg/(m2)(hr) Q Vacuum Pump (9)... 

---