Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Hard hats

Coverahs or other full-body clothing should be worn when working with lead ahoys and properly laundered after use. Hard hats, safety glasses, safety boots, and other safety equipment should be worn as appropriate for the industrial environment where the lead ahoys are used. Hands, face, neck, and arms should be washed before eating or smoking. [Pg.62]

In view of the above, aniline should be handled in areas with adequate ventilation and skin exposure should be avoided by wearing the proper safety equipment. Recommended personal protective equipment includes hard hat with brim, chemical safety goggles, hiU length face shield, mbber gaundet gloves, mbber apron, and mbber safety shoes or mbber boots worn over leather shoes. [Pg.233]

Access to cell rooms is usually restricted to authori2ed personnel. Required personal safety equipment includes mbber shoes or overshoes, goggles, hard hat, and some sort of emergency respirator. Safety training courses are generally required before one is allowed to enter a cell house without a guide. [Pg.82]

Protective clothing, goggles, face shields, hard hats, work gloves, rubber gloves, aprons, hoods, gas masks (with spare canisters), and self-contained breathing apparatus on hand... [Pg.331]

Safety boots Disposable boot eovers Hard hat... [Pg.118]

Improper fitting if used with safety glasses, hard hat, ete. [Pg.131]

The site is under the control of the main contractor, and he must be informed of all visitors, who are advised to comply with requests (e.g. wearing hard hats). [Pg.92]

Coveralls, hard hat, gloves, goggles, safety shoes, a good flash lamp, and low-voltage emergency lighting are basic requirements. [Pg.614]

Technicians must wear suitable safety and protective clothing, including a hard hat, gloves, goggles, and respirator with a HEPA filter. [Pg.656]

Safety clothing hard hats, safety glasses etc. [Pg.262]

As we walk back out of the trees and cross the wooden footbridge over the moat, Mark s friend Charlie comes toward us, carrying hard hats. I ll be closing up soon, he calls. Are you sure you wouldn t like a look first ... [Pg.189]

This act places all responsibility for safety on the employer. If the law requires that a hard hat or safety goggles be worn when a given task is performed, and a worker who has been issued these devices refuses to wear them, the company can be fined and given a citation. [Pg.92]

The word safety used to mean the older strategy of accident prevention through the use of hard hats, safety shoes, and a variety of rules and regulations. The main emphasis was on worker safety. Much more recently, safety has been replaced by loss prevention. This term includes hazard identification, technical evaluation, and the design of new engineering features to prevent loss. The subj ect of this text is loss prevention, but for convenience, the words safety and loss prevention will be used synonymously throughout. [Pg.2]

Hard hat Protects head from falling equipment and bumps... [Pg.96]

Level A protection should be worn when the highest level of respiratory, skin, eye, and mucous membrane protection is needed. This level consists of a fully-encapsulated, vapor-tight, chemical-resistant suit, chemical-resistant boots with steel toe and shank, chemical-resistant inner/outer gloves, coveralls, hard hat, and self-contained (positive pressure) and SCBA. [Pg.64]

Fire Tabun reacts with steam and water to produce toxic and corrosive vapors. Any personnel not fighting a fire of sarin should immediately be evacuated from the area. Respiratory protection is required (positive pressure, full face piece, NIOSH-approved SCBA will be worn). When response personnel respond to handle rescue or reconnaissance, they will wear Level A protection that should be worn when the highest level of respiratory, skin, eye, and mucous membrane protection is needed. This level consists of a fully-encapsulated, vapor-tight, chemical-resistant suit, chemical-resistant boots with steel toe and shank, chemical-resistant inner/outer gloves (butyl rubber glove M3 and M4 Norton, chemical protective glove set), coveralls, hard hat, and self-contained (positive pressure) breathing apparatus (SCBA). [Pg.280]


See other pages where Hard hats is mentioned: [Pg.352]    [Pg.96]    [Pg.168]    [Pg.199]    [Pg.288]    [Pg.87]    [Pg.25]    [Pg.226]    [Pg.315]    [Pg.109]    [Pg.113]    [Pg.114]    [Pg.132]    [Pg.51]    [Pg.159]    [Pg.530]    [Pg.530]    [Pg.49]    [Pg.184]    [Pg.49]    [Pg.220]    [Pg.243]    [Pg.254]    [Pg.261]    [Pg.267]    [Pg.273]    [Pg.274]    [Pg.287]    [Pg.288]   
See also in sourсe #XX -- [ Pg.398 ]




SEARCH



HAT

© 2024 chempedia.info