Halogenation polybutadienes

For (b), a block copolymer, in which one side of the block has affinity to the solvent and the other block to the polymer particle, is the most reasonable stabilizer. Block copolymers of polystyrene/halogenated polybutadiene, polystyrene/ polyethyleneglycol, and polystyrene/PDMS are examples of this type of stabilizer (12). When using a block copolymer, it is possible to provide appropriate amphiphilic and other surface properties by changing the block ratio. For example, when using a block copolymer of polystyrene/PDMS for polymerization of methyl methacrylate in hexane, the ratio of polystyrene/polydimehtylsiloxane should be below 4.4 (13). If the ratio is above 4.4, the block copolymer forms a stable micelle and will not function properly as a stabilizer. 

Natural rubber Styrene-butadiene rubber Polybutadiene Polyisoprene Nitrile rubber Halogenated nitrile rubber Ethylene-propylene rubber EPDM... 

Figure 1. Dependence of polybutadiene cistacticity (%) on the nature of halogen ligand for different catalyst systems. The data of the first four lines are taken from Ref. 18. cis content by IR from Ref. 34.

Berlin and coworkers (5,56) desired to obtain a material with an increased mechanical strength. They carried out a plasticization of bulk ami emulsion polystyrene molecular weight 80000 and 200000 respectively at 150-160° C, with polyisobutylene, butyl rubber, polychloroprene, polybutadiene, styrene rubber (SKS-30) and nitrile rubber (SKN 18 and SKN 40). The best results were obtained with the blends polystyrene-styrene rubber and polystyrene-nitrile rubber. An increase of rubber content above 20-25% was not useful, as the strength properties were lowered. An increase in the content of the polar comonomer, acrylonitrile, prevents the reaction with polystyrene and decreases the probability of macroradical combination. This feature lowers the strength, see Fig. 14. It was also observed that certain dyes acts as macroradical acceptors, due to the mobile atoms of hydrogen of halogens in the dye, AX ... 

These results indicate that if polydienes and similar polymers can be prepared quantitatively with tertiary amine terminal groups, then they can be combined with other halogen functional polymers using established techniques to create interesting new block copolymer systems. For example, consider the reaction between telechelic pyridine terminated polybutadiene and monofunctional bromine terminated polystyrene (equation 4) -the latter has been prepared in 95% yield. >it The product would be an ABA... 

The more cationic halogen containing compounds produced other products. Cobalt bis-allyliodide produced cis-polybutadiene and the even more cationic chromium, produced cyclododecatriene. Only with the more cationic system which introduced trans-structures, was cyclization and reduction of the metal able to intercept the polymerization reaction. Cyclization was not possible in the less cationic cobalt which produces all cis-polybutadiene nor was the hydride transfer possible with the less anionic chromium tris-allyl compound. 

Some of the applications of the organometallic compounds of lanthanides are as catalysts for (i) stereo specific polymerization of diolefins and in particular to obtain high yields of 1,4-ci.v-polybutadiene and 1,4-cw-polyisoprene and copolymer of the two monomers. The order of effectiveness of the rare earths as catalysts is Nd > Ce, Pr < Sm, Eu. The nature of halogen of the Lewis acid affecting the catalytic activity is in the order Br > Cl > I > F. Detailed work on the activity of cerium octanoate-AlR3-halide showed stereo specificity with cerium as the primary regulator. Cerium is thought to form jr-allyl or 7r-crotyl complexes with butadiene. 

Polyenes (i.e., unsaturated aliphatic polymers) such as polyisoprenes, and polybutadiens may be hydrogenated, halogenated, hydrohalo-genated, cyclized, and epoxidized. 

Dependent on the halogen cis or trans 1,4-polybutadiene is obtained. This may reflect differences in the mode of coordination of butadiene. 

Active catalysts for butadiene polymerization are obtained from aluminium alkyl halides and soluble Co and Co salts and complexes. The structure of the organic grouping attached to the cobalt is not important, but compounds most widely employed are acetylacetonates and carboxylic acid salts such as the octoate and naphthenate. The activity of the catalyst and structure of the polymer are affected by the groupings in the complex. Catalysts from aluminium trialkyls and cobalt salts other than halides are relatively unstable and give syndiotactic 1,2-polybutadiene. If halogens are present, e.g., from CoClj or CoBrj,... 

Grafting from, exploits the active sites, which exist or can easily be generated on a polymer. Halogenated polymers are most frequently used for this purpose poly(vinyl) chloride), polychloroprene, chlorinated EPDM, chlorobutyl rubber, bromobutyl rubber, chlorinated polybutadiene, chlorinated butadiene-styrene copolymers etc.145). 

The seminal work of Schulz and co-workers on anionic polymer initiators which contain protected hydroxyl functionality was reported in 1974." These researchers prepared 2-(6-lithio- -hexyloxy)tetrahydopyran by metal-halogen exchange in diethyl ether, see Figure 1. The lithium chloride co-product was removed by filtration. This initiator was successfully employed in the polymerization of 1,3-butadiene. The resultant functionalized living anion was subsequently functionalized with ethylene oxide or coupled with dimethyldichlorosilane. Mild acid hydrolysis with dichloroacetic acid liberated the telechelic dihydroxy polybutadiene. The polybutadienes produced with this initiator exhibited narrow molecular weight distributions = 1.05-1.08). 

World rubber usage of around 25.8 million metric tons is split between natural rubber, which constitutes about 43% of global consumption, and synthetic rubber, of which styrene-butadiene rubber (SBR) accounts for 21%. The balance of synthetic rubbers (36%) consists of polybutadiene rubber (BR) and a range of specialty polymers such as polyurethanes, halogenated polymers, silicones, and acrylates. Traditionally, the growth of synthetic and natural rubber consumption is virtually in line with the change in gross domestic product of, collectively. North America, Europe, Japan, China, and India. 

Halogenation reactions of unsaturated polymers follow two simultaneous paths, ionic and free radical. Ionic mechanisms give soluble products from chlorination reactions of polybutadiene." The free-radical mechanisms, on the other hand, cause crosslinking, isomerization, and addition products. If the free-radical reactions are suppressed, soluble materials form. Natural rubber can be chlorinated in benzene with addition of as much as 30% by weight of chlorine without cycliza-tion. " Also, chlorination of polyalkenamers, both cis and trans, yields soluble polymers. X-rays show that the products are partly crystalline. The crystalline segments obtained from 1,4-trans-polyisoprene are diisotactic poly( 0 /rw-dichlorobutamer)s while those obtained from the 1,4-cis isomer are diisotactic polyOAfieo-l,2-dichlorobutamer)s. ... 

Aminoxy chain-end-functionalized polybutadienes have been prepared by the reactions of PBDLi with halogen-containing benzyloxyamines. PBDLi (Mn = 990gmor, Mw/Mn=1.04) in heptane was reacted with 2,2,6,6-tetra-methyl-l-(2-bromo-l-phenylethoxy)piperidine at -78 °C as shown in eqn [33]. When this reaction was effected at room temperature, 73% of a dimeric polybutadiene product was obtained no dimeric product was observed when the reaction was carried out at -78 °C. The H NMR... 

By contrast, chlorination of polybutadiene in benzene is a straightforward addition reaction of the halogens to the double bonds [48, 49] ... 

Polybutadiene Natural rubber Halogenated butyl Polypropylene... 

---