Halogenated anhydrides

Group Acids Alcohols Oxides Hydroxides Halogens Anhydrides... 

Except for lactam n-acyl derivatives, compounds such as esters, anhydrides and halogen anhydrides of carboxylic acids, which can activate lactam polymerization, can also be used as activators (promoters). 

However, acylation reactions of N-unsubstituted pyrazolines with halogen anhydrides of acids are very often followed by the destruction of the heterocyclic ring owing to the ease of breaking the C(5)—Nq) bond located at the (3-position of the azomethine group [140, 141, 142, 166]. For example, pyrazoline 108 treated with halogen anhydrides of acids yields a,(3-unsaturated ketone 109 and diacyl-hydrazine 110 [166] (Scheme 2.29). 

Alkoxy fatty acid anhydrides show a behavior similar to that of the halogenated anhydrides and do not esterify cellulose in the presence of acid catalysts. In the presence of pyridine, however, methoxyacetic and ethoxyacetic anhydrides or their acid chlorides give soluble cellulose derivatives."... 

Halogen anhydrides of dicarboxylic acids such as terephthalic or diphe-nyldicarbonic acid [1], as well as mesitylene tricarbonic acid [29], also react... 

A limited number of a-halogenated anhydrides have been described by Rogstad et al. [32] and by Redington and Lin [33]. 

Brominated epoxy resins cured with halogenated anhydrides to give flame-retardant polymers [147]. 

About 10% of phthalic anhydride production goes into miscellaneous uses such as the synthesis of various dyes and pigments, halogenated anhydrides, and so on. 

Bromination of fatty acids in the a-position can be effected quite readily in the presence of phosphorus trichloride, red phosphorus or pyridine as catalysts or halogen carriers with acetic acid, the addition of acetic anhydride (to ensure the absence of water) improves the yield and facilitates the bromination. Examples are —... 

Nitration and halogenation of furfural occurs under carehiUy controlled conditions with introduction of the substituent at the open 5-position (24,25). Nitration of furfural is usually carried out in the presence of acetic anhydride, resulting in the stable compound, 5-nitrofurfuryhdene diacetate (26,27). The free aldehyde is isolated by hydrolysis and must be used immediately in a reaction because it is not very stable. 

Another group of halogenated fluorescein dyes is prepared by condensing chloro derivatives of phthalic anhydride with resorcinol, followed by bromination or iodination. Thus Phloxine B /78472-87-2] (Acid Red 92, Cl45410) (42) is prepared by condensing tetrachlorophthaUc anhydride with resorcinol followed by tetrabromination. Phloxine B undergoes ethylation to yield the yellowish ted acid dye Cyanosine B [6441-80-1] (43). 

Sulfur tetrafluoride [7783-60-0] SF, replaces halogen in haloalkanes, haloalkenes, and aryl chlorides, but is only effective (even at elevated temperatures) in the presence of a Lewis acid catalyst. The reagent is most often used in the replacement of carbonyl oxygen with fluorine (15,16). Aldehydes and ketones react readily, particularly if no alpha-hydrogen atoms are present (eg, benzal fluoride [455-31-2] from benzaldehyde), but acids, esters, acid chlorides, and anhydrides are very sluggish. However, these reactions can be catalyzed by Lewis acids (HP, BF, etc). 

Chemical Properties. A combination of excellent chemical and mechanical properties at elevated temperatures result in high performance service in the chemical processing industry. Teflon PEA resins have been exposed to a variety of organic and inorganic compounds commonly encountered in chemical service (26). They are not attacked by inorganic acids, bases, halogens, metal salt solutions, organic acids, and anhydrides. Aromatic and ahphatic hydrocarbons, alcohols, aldehydes, ketones, ethers, amines, esters, chlorinated compounds, and other polymer solvents have Httle effect. However, like other perfluorinated polymers,they react with alkah metals and elemental fluorine. 

Other Reactions of Phospholipids. The unsaturated fatty acid groups in soybean lecithin can be halogenated. Acetic anhydride combined with the amino group of phosphatidylethanolamine forms acetylated compounds. PhosphoHpids form addition compounds with salts of heavy metals. Phosphatidylethanolamine and phosphatidjhnositol have affinities for calcium and magnesium ions that are related to interaction with their polar groups. 

Electrophilic Addition. Electrophilic reagents attack the electron-deficient bond of maleic anhydride (25). Typical addition reagents include halogens, hydrohaHc acids, and water. 

Halogenation. Halogens add directly to the double bond of maleic anhydride to give dihalo succinic acids. However, different procedures are used for dihalomaleic anhydride derivatives. Fluorinated substrates offer access to difluoromaleic anhydride [669-78-3] (64). 

Halogenated and 4,5-halogenated derivatives of 1,8-naphthalenedicarboxyHc acid anhydride are useful intermediates for dyes, pigments, and fluorescent whiteners for polymers. 

Halogenated intermediates, dibromoneopentyl glycol [3296-90-0] (DBNPG), and alkoxylated derivatives of tetrabromobisphenol A are used extensively in flame-retardant apphcations. Similar properties can be derived from halogenated dibasic acids, chlorendic anhydride [115-27-5] (CAN), and tetrabromophthahc anhydride [632-79-1] (TBPA). Processes can be used to produce brominated products by the in situ bromination of polymers derived from tetrahydrophthahc anhydride. 

Flame-Retardant Resins. Flame-retardant resins are formulated to conform to fire safety specifications developed for constmction as well as marine and electrical appHcations. Resins produced from halogenated intermediates (Table 5) are usually processed at lower temperatures (180°C) to prevent excessive discoloration. Dibromoneopentyl glycol [3296-90-0] (DBNPG) also requires glass-lined equipment due to its corrosive nature. Tetrabromophthahc anhydride (TBPA) and chlorendic anhydride (8) are formulated with ethylene glycols to maximize fiame-retardant properties reaction cycle times are about 12 h. Resins are also produced commercially by the in situ bromination of polyester resins derived from tetrahydrophthahc anhydride... 

Halogenated intermediates based on chlorendic anhydride and alkoxylated, brominated bisphenol are quite stable and are used extensively in flame-retarded high temperature compositions, but brominated aUcychcs, such as dibromotetrahydrophthahc resin, are rapidly dehydrohalogenated at lower temperatures. 

The introduction of tritium into molecules is most commonly achieved by reductive methods, including catalytic reduction by tritium gas, PH2], of olefins, catalytic reductive replacement of halogen (Cl, Br, or I) by H2, and metal pH] hydride reduction of carbonyl compounds, eg, ketones (qv) and some esters, to tritium-labeled alcohols (5). The use of tritium-labeled building blocks, eg, pH] methyl iodide and pH]-acetic anhydride, is an alternative route to the preparation of high specific activity, tritium-labeled compounds. The use of these techniques for the synthesis of radiolabeled receptor ligands, ie, dmgs and dmg analogues, has been described ia detail ia the Hterature (6,7). 

Nitration of > -hydroxyben2oic acid with filming nitric acid in the presence of sulfuric acid and acetic anhydride gives a mixture of the 2-nitro [602-00-6] and 4-nitro [619-14-7] substitution products. Bromination and iodination yield the 4-halogenated derivatives (4-bromo [14348-38-0] and 4-iodo [58123-77-6]). When > -hydroxyben2oic acid is treated with formalin in the presence of hydrochloric acid, 4-hydroxyphthahde [13161 -32-5] is obtained as shown in equation (10). 

Halogenation. Succinic acid and succinic anhydride react with halogens through the active methylene groups. Succinic acid heated in a closed vessel at 100°C with bromine yields 2,3-dibromosuccinic acid almost quantitatively. The yield is reduced in the presence of excess water as a result of the formation of brominated hydrocarbons. The anhydride gives the mono- or dibromo derivative, depending on the equivalents of bromine used. 

---