Halides, aryl, arylation alkenes, metal

Treatment of alkali metal alkyl or aryltellurolates (Sections) with alkyl halides, aryl halides, alkenes, or alkynes have been nsed to prepare unsymmetrical tellurides, as exemplified by the reaction of sodium phenyl teUurolate or paramethylphenyl tellnrolate with PhC CHCOPh. ... 

Favoring the jS-regioselectivity of the Heck reaction with electron-rich alkenes is not so simple. In 1988, Andersson and Hallberg observed that the type of halide coordinating to the metal center had a profound influence on the regioselectivity, chloride favoring the formation of the )S-alkene when using vinyl ethers [214,215]. Scheme 4.65 shows the most relevant results in the hterature toward the p-reg-ioselective arylation of vinyl ethers. 

Similar cross-coupling procedures have been used to prepare styrenes by the reaction of metalated aromatics with vinyl halides/triflates or, conversely, metalated alkenes with aromatic halides/triflates in the presence ofPd(Ph3P)4 (eq 6). Typically, ArCl are poor substrates in Pd(PPh3)4-catalyzed coupling reactions. However, by forming the chromium tricarbonyl complex of the aryl chloride, a facile coupling reaction with vinyl-stannanes can be achieved (eq 7). ... 

In Grignard reactions, Mg(0) metal reacts with organic halides of. sp carbons (alkyl halides) more easily than halides of sp carbons (aryl and alkenyl halides). On the other hand. Pd(0) complexes react more easily with halides of carbons. In other words, alkenyl and aryl halides undergo facile oxidative additions to Pd(0) to form complexes 1 which have a Pd—C tr-bond as an initial step. Then mainly two transformations of these intermediate complexes are possible insertion and transmetallation. Unsaturated compounds such as alkenes. conjugated dienes, alkynes, and CO insert into the Pd—C bond. The final step of the reactions is reductive elimination or elimination of /J-hydro-gen. At the same time, the Pd(0) catalytic species is regenerated to start a new catalytic cycle. The transmetallation takes place with organometallic compounds of Li, Mg, Zn, B, Al, Sn, Si, Hg, etc., and the reaction terminates by reductive elimination. 

The Mizoroki-Heck reaction is a metal catalysed transformation that involves the reaction of a non-functionalised olefin with an aryl or alkenyl group to yield a more substituted aUcene [11,12]. The reaction mechanism is described as a sequence of oxidative addition of the catalytic active species to an aryl halide, coordination of the alkene and migratory insertion, P-hydride elimination, and final reductive elimination of the hydride, facilitated by a base, to regenerate the active species and complete the catalytic cycle (Scheme 6.5). 

This method ensures the deposition of very reactive metal nanoparticles that require no activation steps before use. We shall review here the following examples of catalytic reactions that are of interest in line chemical synthesis (a) the hydrogenation of substituted arenes, (b) the selective hydrogenation of a, 3-unsaturated carbonyl compounds, (c) the arylation of alkenes with aryl halides (Heck reaction). The efficiency and selectivity of commercial catalysts and of differently prepared nanosized metal systems will be compared. 

Studies on heterogeneous Pd metal catalysts for the arylation of alkenes with aryl halides (the Mirozoki-Heck reaction often reported as Heck reaction) [28] continue to... 

Transition metal-catalyzed transformations are of major importance in synthetic organic chemistry [1], This reflects also the increasing number of domino processes starting with such a reaction. In particular, Pd-catalyzed domino transformations have seen an astounding development over the past years with the Heck reaction [2] - the Pd-catalyzed transformation of aryl halides or triflates as well as of alkenyl halides or triflates with alkenes or alkynes - being used most often. This has been combined with another Heck reaction or a cross-coupling reaction [3] such as Suzuki, Stille, and Sonogashira reactions. Moreover, several examples have been published with a Tsuji-Trost reaction [lb, 4], a carbonylation, a pericyclic or an aldol reaction as the second step. 

Hydroxycarbonylation and alkoxycarbonylation of alkenes catalyzed by metal catalyst have been studied for the synthesis of acids, esters, and related derivatives. Palladium systems in particular have been popular and their use in hydroxycarbonylation and alkoxycarbonylation reactions has been reviewed.625,626 The catalysts were mainly designed for the carbonylation of alkenes in the presence of alcohols in order to prepare carboxylic esters, but they also work well for synthesizing carboxylic acids or anhydrides.137 627 They have also been used as catalysts in many other carbonyl-based processes that are of interest to industry. The hydroxycarbonylation of butadiene, the dicarboxylation of alkenes, the carbonylation of alkenes, the carbonylation of benzyl- and aryl-halide compounds, and oxidative carbonylations have been reviewed.6 8 The Pd-catalyzed hydroxycarbonylation of alkenes has attracted considerable interest in recent years as a way of obtaining carboxylic acids. In general, in acidic media, palladium salts in the presence of mono- or bidentate phosphines afford a mixture of linear and branched acids (see Scheme 9). 

In addition to /3-H elimination, olefin insertion, and protonolysis, the cr-metal intermediate has also proved to be capable of undergoing a reductive elimination to bring about an alkylative alkoxylation. Under Pd catalysis, the reaction of 4-alkenols with aryl halides affords aryl-substituted THF rings instead of the aryl ethers that would be produced by a simple cross-coupling mechanism (Equation (126)).452 It has been suggested that G-O bond formation occurs in this case by yy/z-insertion of a coordinated alcohol rather than anti-attack onto a 7r-alkene complex.453... 

Tab. 10.8 summarizes the application of rhodium-catalyzed allylic etherification to a variety of racemic secondary allylic carbonates, using the copper(I) alkoxide derived from 2,4-dimethyl-3-pentanol vide intro). Although the allyhc etherification is tolerant of linear alkyl substituents (entries 1-4), branched derivatives proved more challenging in terms of selectivity and turnover, the y-position being the first point at which branching does not appear to interfere with the substitution (entry 5). The allylic etherification also proved feasible for hydroxymethyl, alkene, and aryl substituents, albeit with lower selectivity (entries 6-9). This transformation is remarkably tolerant, given that the classical alkylation of a hindered metal alkoxide with a secondary alkyl halide would undoubtedly lead to elimination. Hence, regioselective rhodium-catalyzed allylic etherification with a secondary copper(l) alkoxide provides an important method for the synthesis of allylic ethers. 

The reaction of heterocyclic lithium derivatives with organic halides to form a C-C bond has been discussed in Section 3.3.3.8.2. This cannot, however, be extended to aryl, alkenyl or heteroaryl halides in which the halogen is attached to an sp2 carbon. Such cross-coupling can be successfully achieved by nickel or palladium-catalyzed reaction of the unsaturated organohalide with a suitable heterocyclic metal derivative. The metal is usually zinc, magnesium, boron or tin occasionally lithium, mercury, copper, and silicon derivatives of thiophene have also found application in such reactions. In addition to this type, the Pd-catalyzed reaction of halogenated heterocycles with suitable alkenes and alkynes, usually referred to as the Heck reaction, is also discussed in this section. 

The reaction sequence in the vinylation of aromatic halides and vinyl halides, i.e. the Heck reaction, is oxidative addition of the alkyl halide to a zerovalent palladium complex, then insertion of an alkene and completed by /3-hydride elimination and HX elimination. Initially though, C-H activation of a C-H alkene bond had also been taken into consideration. Although the Heck reaction reduces the formation of salt by-products by half compared with cross-coupling reactions, salts are still formed in stoichiometric amounts. Further reduction of salt production by a proper choice of aryl precursors has been reported (Chapter III.2.1) [1]. In these examples aromatic carboxylic anhydrides were used instead of halides and the co-produced acid can be recycled and one molecule of carbon monoxide is sacrificed. Catalytic activation of aromatic C-H bonds and subsequent insertion of alkenes leads to new C-C bond formation without production of halide salt byproducts, as shown in Scheme 1. When the hydroarylation reaction is performed with alkynes one obtains arylalkenes, the products of the Heck reaction, which now are synthesized without the co-production of salts. No reoxidation of the metal is required, because palladium(II) is regenerated. 

The transition metal-catalysed coupling of aryl halides with alkenes (alkenyla-tion of aromatic halides) is referred to as the Heck reaction [66-75]. Heitz et al. [76-82] were the first to utilise the Heck reaction to synthesise high molecular weight poly(arylene vinylene)s by the self-coupling of bromostyrene [scheme (2)] or the cross-coupling of dibromoarene with ethylene [scheme (4)] or divi-nylarene [scheme (5)]. 

---