Glue properties

Uses Antifoam for paper and cellulose industries, chemical industries, mineral oil industries, bottle-washing machines, syn. sizes, gas washing, alkaline decomposition Bauxite, casein sol ns., gelatin and gluten glues Properties Brownish liq. weak odor emulsifiable in water dens. 1.0 vise. 600 mPa S max. b.p. 100 C setting pt. -20 C flash pt. 100 C ignition pt. 470 C pH 9-10(1% in water)... 

The theme of this book has a strong emphasis on the structure of chemical compounds, its representation, and its correlation with properties. However, there are compounds whose structure is either unknown or ill-defincd. This is true, for example, for many polymers, particularly those that have been prepared from several components, or for many technical materials, such as glues, washing powder, etc. 

The 2-imino-4-thiazolines may be used as ultraviolet-light stabilizers of polyolefin compositions (1026). 2-Aminothiazole improves adhesive properties of wood to wood glue (271). Cbmpound 428 exhibits antioxidant properties (Scheme 242) (1027). Ammonium N-(2-thiazolyl)dithio-carbamate (429) is a bactericide and fungicide used in industrial products such as lumber, paint, plastics, and textiles (1037). Compound 430 is reported (1038) to form an excellent volume of foam coating in aluminum pans when ignited with propane. 

Emulsion Adhesives. The most widely used emulsion-based adhesive is that based upon poly(vinyl acetate)—poly(vinyl alcohol) copolymers formed by free-radical polymerization in an emulsion system. Poly(vinyl alcohol) is typically formed by hydrolysis of the poly(vinyl acetate). The properties of the emulsion are derived from the polymer employed in the polymerization as weU as from the system used to emulsify the polymer in water. The emulsion is stabilized by a combination of a surfactant plus a coUoid protection system. The protective coUoids are similar to those used paint (qv) to stabilize latex. For poly(vinyl acetate), the protective coUoids are isolated from natural gums and ceUulosic resins (carboxymethylceUulose or hydroxyethjdceUulose). The hydroHzed polymer may also be used. The physical properties of the poly(vinyl acetate) polymer can be modified by changing the co-monomer used in the polymerization. Any material which is free-radically active and participates in an emulsion polymerization can be employed. Plasticizers (qv), tackifiers, viscosity modifiers, solvents (added to coalesce the emulsion particles), fillers, humectants, and other materials are often added to the adhesive to meet specifications for the intended appHcation. Because the presence of foam in the bond line could decrease performance of the adhesion joint, agents that control the amount of air entrapped in an adhesive bond must be added. Biocides are also necessary many of the materials that are used to stabilize poly(vinyl acetate) emulsions are natural products. Poly(vinyl acetate) adhesives known as "white glue" or "carpenter s glue" are available under a number of different trade names. AppHcations are found mosdy in the area of adhesion to paper and wood (see Vinyl polymers). 

In the late 1800s, when the demand for coated paper for the halftone printing process increased, casein rapidly replaced glue. Casein forms a hard, tough film when dry, and can be waterproofed easily with formaldehyde (qv). The properties of soy protein are similar to those of casein, and soy protein has been substituted for it in many types of coated papers requiring a casein-type binder (see Soybeans and other oilseeds). Casein, a valuable food product, is seldom used as a paper adhesive, in spite of its excellent adhesive properties. 

Dicyandiamide reduces the viscosity of certain coUoidal solutions. This property is of commercial significance ia the manufacture of glues and adhesives, ia the coating and sizing of paper and textiles, and ia the conditioning of phosphate drilling muds (see Petroleum). This action may prove useful ia other appHcations where control of viscosity is important (54). 

Rubber-based adhesives provide softness and good low temperature flexibility (see Table 8). These properties make them the primary choice for the hinge application, which are two thin glue beads applied to the sides of the book block adjacent to the spine. These adhesive beads allow the book to open with the cover and help to protect the spine glue from stresses. Hinge glues have low if any wax, and are pressure sensitive. When used for the spine application, rubber-based adhesives require a water-based emulsion primer due to their short open time and thus low penetration of paper substrates. 

For the production of wood-based panels various adhesives are in use like aminoplastic resins (UF, MU(P)F), phenolic resins (PF) or isocyanate (PMDI). The proper choice of the adhesive depends on the required properties of the wood-based panels, on the working conditions during the production as well as often on the costs for the adhesive system this not only means the net price of the adhesive but the overall costs of the gluing system including glue spread factor. 

Epoxy resins have outstanding mechanical and electrical properties, dimensional stability, resistance to heat and chemicals, and adhesion to other materials. They are used for casting, potting, encapsulation, protective coatings, and adhesives. Epoxy glues separate the resin from the curing. igciU to be mixed just prior to use. 

The property of thermal, reversible gelation is obtained by the addition of water-soluble proteins and protein degradation products to an aqueous solution of poly (vinyl alcohol) 2). Protein products such as albumin, gelatin, glue, a-amino acids, and their condensation products—diketopiperazines—may be used. A typical formulation for the preparation of a thermally reversible gel is ... 

---