Glass siliconized

The constmction of the E-111 windshield shown in Eigure 8 replaced a glass—silicone laminate previously used. The all-plastic windshield has improved impact resistance so that it is birdproof to 250 m/s (33). In this instance, the scratch resistance of glass was waived to obtain the impact performance at the allowed weight. 

Table 2. Reflection of light at an interface Index of refraction and percentage of energy reflected at an air-medium interface for glass, silicon and HgCdTe.

The two plates were not manufactured via the same route and were not made of the same material [7]. Typically, rectangular channels in silicon are realized by sawing, whereas semi-circular channels are made in glass by wet-chemical etching. Such glass/silicon plates are joined by anodic bonding. 

B. Ziaie, J.A. von Arx, M.R. Dokmeci, and K. Najafi, A hermetic glass-silicon micropackage with high-density on-chip feedthroughs for sensors and actuators. J. Microelectromechan. Sys. 5, 66—177 (1996). 

De Mello et al. have constructed a so-called pSYNTAS (miniaturized synthesis and total analysis system). The system was used to perform an Ugi-type reaction to form several a-aminoacetamides from amines, isocyanates and formaldehyde in the presence of water (Scheme 25) [56-58]. The reported system consists of a glass/silicon nanoreactor [59] in connection to a TOF-MS for the real-time online analysis of the reaction stream. Reactions were conducted in the 600 nl volume chip under continuous flow of 20-2 pl/min flow rate. Reduced flow rates resulted in increased outputs. The analyzed outlet flow showed high yields of the desired products with small quantities of starting materials and intermediates (no exact yields were reported). 

GRAPHICAL STATISTICAL METHODS OF IDENTIFICATION OF MINERAL AND FATTY OILS, GLASS, SILICONES, AND CATALYSTS... 

Porous media are also manufactured from porcelain, glass, silicon carbide, and a number of metals Monel, Inconel, nickel, bronze, Hastelloy C, Stellite L-605, gold, platinum, and many types of stainless steel. Two manufacturers of porous septa are Mott (mottcorp.com) and Pall (pall.com). The air permeabilities of Table 14-23 indicate the relative flow resistances of the various grades to homogeneous fluid but may not be used in designing a disperser for submerged... 

The important ceramic matrix materials are glass, silicon carbide, silicon nitride, alumina, glass-ceramics, sialons, intermetallics and some elemental materials. A list of some ceramic matrix materials is given in Table 3.5. 

Fig. 21. Cross sections of the glass-silicon-glass structures for the pump actuator, the pump membrane and the valves. Right from the figures, the so-called Ideal Physical Models (IPM s) of the pump membrane and the valve are given...

The absorption cell is a glass silicon glass sandwich component (15xlx 0.4 mm) where optical intensities from different colored LEDs are measured by a 64 pixel CCD detector, see also Fig. 25. A demonstrator system with a total system volume of about 50 ml is illustrated in Fig. 26. 

---