Glass, Glassware

This is a very diverse industry segment which manufactures glass, glassware, cement, concrete, clay products pottery, gypsum, and plaster products. In the USA the industry employs about 500,000 people and operates over 16,000 facilities. There is a broad range of... 

Total of source emissions with <2% as each contribution in 2002 (iron and steel production, glass/ glassware making, secondary metals, Pb/Zn ores, acid battery production, stainless steel and related production, primary copper production, cement making, metal products) 425 13.0 229 16.0... 

All glassware should be scrupulously clean and, for most purposes, dry before being employed in preparative work in the laboratory. It is well to develop the habit of cleaning all glass apparatus immediately after use the nature of the dirt will, in general, be known at the time, and, furthermore, the cleaning process becomes more difficult if the dirty apparatus is allowed to stand for any considerable period, particularly if volatile solvents have evaporated in the meantime. 

Note. 3. All glassware of the distillation apparatus must be rinsed before use with a dilute solution of triethylamine Or another volatile amine in diethyl ether. Traces of acid on the glass walls may cause isomerization to H2C=CH-C(OCH3)=C(CH3)(OC2H5). 

Hate 3. All glassware used for the work-up and distillation must be rinsed with a dilute solution of triethylamine in diethyl ether or acetone in order to be sure that traces of acids on the glass walls have been neutralized. Allenic sulfides with the structure C=C=C(SR)-CH- isomerize under the influence of acids to give conjugated dienes, C=C-C(SR)=C. 

Three important precautions are needed when working with pipets and volumetric flasks. First, the volume delivered by a pipet or contained by a volumetric flask assumes that the glassware is clean. Dirt and grease on the inner glass surface prevents liquids from draining evenly, leaving droplets of the liquid on the container s walls. For a pipet this means that the delivered volume is less than the calibrated volume, whereas drops of liquid above the calibration mark mean that a volumetric flask contains more than its calibrated volume. Commercially available cleaning solutions can be used to clean pipets and volumetric flasks. 

The solutions must be carefully prepared so as to be free of dust particles and other extraneous scatterers. Filtration through sintered glass or centrifugation is widely used to clarify solutions of particles which would compete with polymeric solutes. This concern for cleanliness also extends to glassware, especially scattering cells. A fingerprint on the viewing window is disastrous ... 

Frequently, preconcentration of an analyte is necessary because the detector used for quantitation may not have the necessary detectabiUty, selectivity, or freedom from matrix interferences (32). Significant sample losses can occur during this step because of very small volume losses to glass walls of the recovery containers, pipets, and other glassware. 

Soda-lime glass Borosilicate glass 70 SiOj, 10 CaO, 15 Na O 80 SiOj, 15 BjOj, 5 NajO Windows, bottles, etc. easily formed and shaped. Pyrex cooking and chemical glassware high-temperature strength, low coefficient of expansion, good thermal shock resistance. 

Pressure rupture of even a small pieee of equipment may result in a serious explosion generating missiles travelling at high veloeity. This is an important eonsideration when using laboratory glassware or industrial glass equipment and pipework. 

Glass durability tests There are two types of durability tests for glassware, viz. grain or powder tests and whole articles tests. 

The effects of corrosion on other properties need similar direct assessment in many cases. However, in the absence of accepted standard tests the BS, DIN, ISO tests for laboratory glassware are often used. At the present time, the British Standard BS 3473 Methods of testing and classification of the chemical resistance of glass used in the production of laboratory glassware is being re-issued in six parts, of which the first five parts are identical to recently revised ISO test procedures. There are also corresponding DIN tests in some cases which are very similar. The current situation is ... 

Method of Testing Chemical Resistance of Glass Used in the Production of Laboratory Glassware, BS 3473 1962... 

All glassware must be scrupulously clean (see Section 3.8), and if it has been standing for any length of time, must be rinsed with distilled or de-ionised water before use. The outsides of vessels may be dried with a lint-free glass-cloth which is reserved exclusively for this purpose, and which is frequently laundered, but the cloth should not be used on the insides of the vessels. 

---