Furan derivatives production

Alkynyl)oxiranes also react with carbon nucleophiles to afford furan derivatives. Furanes of different types are obtained depending on the structure of the substrates. 7-Methyl-2-ethynyloxirane (95) reacts with acetoacetate to give the furan 97 by the elimination of formaldehyde from the cyclized product 96. The hydroxy ester of the alkylidenefuran 98 and the corresponding lactone 99 are obtained by the reaction of i-methyl-2-(2-propynyI)oxirane[40, 42]. 

For example, treatment of dione 12 with hydrochloric acid yielded furan 13, a key synthetic intermediate for the production of a variety of compounds that were recently investigated for anticancer activity. Related inquiries by members of the same research team identified furans derived from IS as potential treatments for RNA viruses. Furan IS was prepared by condensation of dione 14 with catalytic sulfuric acid in refluxing acetic anhydride. ... 

Reduction of 3,5,5-tris-aryl-2(5// )-furanones 115 (R, R, R = aryl) with dimethyl sulfide-borane led to the formation of the 2,5-dihydrofurans 116 in high yields. However, in the case of 3,4-diaryl-2(5//)-furanones 115 (R, R = aryl R = H or r = H R, R = aryl), the reduction led to a complicated mixture of products of which only the diarylfurans 117 could be characterized (Scheme 36) (88S68). It was concluded that the smooth conversion of the tris-aryl-2(5//)-furanones to the corresponding furan derivatives with the dimethylsulfide-borane complex in high yields could be due to the presence of bulky aryl substituents which prevent addition reaction across the double bond (88S68). 

While the products of 2-furaldehyde polymerization by heat are branched polycondensates with highly conjugated structures (see Section Il-C), the photopolymerization of this furan derivative gives a linear polyaddition product 24>7S). 

In this section some systems are briefly described which make use of furan derivatives as starting materials for chemical transformations which eventually lead to polymeric products. However, with the exception of Section (c), these final products bear little resemblance to the original furan compounds used and are, therefore, only marginally relevant to the context of the present review. 

Chemoselectivity plays an important role in the benzannulation reaction as five-membered rings such as indene or furan derivatives are potential side products. The branching point is again the rf-vinylcarbene complex D intermediate which maybe formed either as a (Z)- or an ( )-metallatriene the (E)-configuration is required for the cyclisation with the terminal double bond. (Z)-Metallatriene D, however, leads to the formation of furan derivatives H (Scheme 8). Studies on the formation of (E)- and (Z)-isomers discussing stereoelectronic effects have been undertaken by Wulff [17]. 

A solvent-free synthesis of benzo[b]furan derivatives 10-79, a class of compounds which is often found in physiologically active natural products, was described by Shanthan Rao and coworkers. These authors heated phosphorane 10-71 for 8 min in a microwave oven and obtained the benzo[b]furan 10-74 in 73% yield (Scheme 10.18) [25]. The sequence is initiated by an intramolecular Wittig reaction, providing alkyne 10-72 this underwent a subsequent Claisen rearrangement to give the intermediate 10-73. Also in this case, normal oil-bath heating gave much lower yields (5%) of the desired product the authors hypothesize that the micro-... 

Although the pyrolysis of some classes of polysaccharide materials has been studied quite extensively in the food, petrol and tobacco industry, very little has been published specifically on polysaccharide binders (arabic gum, tragacanth gum, fruit tree gum, honey and starch). The pyrolysis of glucane based polymers, especially cellulose, has been studied in detail [6,55], highlighting how anhydrosugars and furan derivatives are the main pyrolysis products, together with one-, two- and three-carbon aldehydes and acids. 

Alkyl migration has not been found in protonated furan derivatives. Neither 2,5-dimethylfuran nor 2,3,5-trimethylfuran undergo any change other than protonation in fluorosulfonic acid containing antimony pentafluoride. On the other hand, migrations will occur during cyclization until the product corresponds to a protonated furan (Scheme 29).19... 

The course of the reaction of phenacyl bromides (39) with nickel carbonyl is markedly dependent on the solvent employed in tetrahydrofuran the products are 1,2-dibenzoylethanes (cf. 40) but in dimethylformamide, 2,5-diarylfurans (41) are obtained in moderate to excellent yield (Scheme 53).90 It is possible that the furan derivatives (41) arise via intermediate fi,y-epoxyketones which can be isolated as products from a number of a-bromo-ketone substrates [cf. 39 and Section II].28... 

Furan Derivatives from Ketoses and Their Oxidation Products ... 

These cycloadducts, at their most elementary level, are excellent intermediates for the synthesis of 3-substituted furan derivatives. For example, Kawanisi and coworkers reported a synthesis of perillaketone 174 in which the critical step was a Paterno-BUchi photocycloaddition between furan and 4-methylpentanal in the presence of methanesul-fonic acid (Scheme 39)82. This reaction furnished two initial photoadducts, 172 and 173. The unexpected product 173 presumably arises from a Norrish Type II cleavage of 4-methylpentanal to give acetaldehyde, and subsequent cycloaddition with furan. The desired cycloadduct 172 was then converted uneventfully to 174 via acid-catalyzed aromatization and oxidation. 

Pure xylan is not employed in industry. but crude xylan or pentosans are of industrial importance. Xylan has been proposed as a textile size but is not employed as yet for this purpose.130 Perhaps the largest use of pentosans is in their conversion to furfural, which has many applications and serves as the source of other furan derivatives. At the present time, large quantities of furfural are used in the extractive purification of petroleum products, and recently a large plant has been constructed to convert furfural by a series of reactions to adipic acid and hexamethylene-diamine, basic ingredients in the synthesis of nylon. In commercial furfural manufacture, rough ground corn cobs are subjected to steam distillation in the presence of hydrochloric acid. As mentioned above, direct preferential hydrolysis of the pentosan in cobs or other pentosan-bearing products could be used for the commercial manufacture of D-xylose. 

The photolysis of the furan derivatives 78 yielded the butadienals 79 as the main products [123], Further isomerizations leading to allenic esters used the radiation of a cyclopropene-1 -carboxylic acid ester [124] or applied flash vacuum pyrolysis to 3 -ethoxy cyclobut- 2-en-l-one[125]. 

In contrast to the rich chemistry of alkoxy- and aryloxyallenes, synthetic applications of nitrogen-substituted allenes are much less developed. Lithiation at the C-l position followed by addition of electrophiles can also be applied to nitrogen-containing allenes [10]. Some representative examples with dimethyl sulfide and carbonyl compounds are depicted in Scheme 8.73 [147, 157]. a-Hydroxy-substituted (benzotriazo-le) allenes 272 are accessible in a one-pot procedure described by Katritzky and Verin, who generated allenyl anion 271 and trapped it with carbonyl compounds to furnish products 272 [147]. The subsequent cyclization of 272 leading to dihydro-furan derivative 273 was achieved under similar conditions to those already mentioned for oxygen-substituted allenes. 

The synthesis of oxygen heterocycles in which cyclization onto a pendant alkyne is a key step has also been achieved. Reaction (7.36) shows an example of iodoacetal 29 cyclization at low temperature that afforded the expected furanic derivative in moderate Z selectivity [47]. A nice example of Lewis acid complexation which assists the radical cyclization is given by aluminium tris(2,6-diphenyl phenoxide) (ATPH) [48]. The (3-iodoether 30 can be com-plexed by 2 equiv of ATPH, which has a very important template effect, facilitating the subsequent radical intramolecular addition and orienting the (TMS)3SiH approach from one face. The result is the formation of cyclization products with Z selectivity and in quantitative yield (Reaction 7.37). 

The aromatic silylation of five-membered heteroarenes under the same conditions (catalyst, temperature, solvent) also proceeded in regioselective fashion. Both, thiophene and furane derivatives are exclusively silylated at the a-position, but 1-triisopropylsily 1-pyrrole and -indole each produce selectively ]3-silyl products (Equations 14.9 and 14.10). 

Other examples of the iodonium ylide-based syntheses of furan derivatives involve cycloaddition reactions with alkenes or alkynes. Although the majority of these syntheses involve stable iodonium ylides (86JOC3453 94T11541) (e.g., Eqs. 16 and 17), in some cases the ylides are unstable and are generated in situ (92JOC2135) (e.g., Eq. 18). In the case of alkenes, dihydrofuran derivatives are obtained (Eqs. 16-18). This synthetic route is especially useful for the synthesis of dihydrobenzofuran derivatives that are related to the neolignan family of natural products (Eq. 18). 

Enzymatic reduction of carbonyl compounds and enzymatic enantioselective transformation of racemic or meso alcohols (25,43.) are two methodologies that have proven to be beneficial in the preparation of optically active hydroxyl compounds, key chiral building blocks used in carbohydrate and natural product syntheses (44-45. Our interest in this area is to develop enzymatic routes to optically active glycerol and furan derivatives, and hydroxyaldehydes. 

Triphenylbismuthonium ylide reacted with terminal alkynes in the presence of a catalytic amount of copper(I) chloride to form furan derivatives (Scheme 11) [27]. Although the yields were low, the products were obtained regioselectively. The reaction was sensitive to steric factors, and internal alkynes did not provide the product. A carbenoid intermediate was probably involved in the reaction. 

In this process, only the configurations at C-3 and C-4 were retained, so that the same trihydroxylated furan derivatives 3b or 4b were obtained from o-ribose (9) and o-arabinose (8) (Scheme 1, Table 1). These compounds were diastereoi-somers of the products 3a or 4a obtained from o-xylose (7). When starting from... 

---