FTICR

Other types of mass spectrometer may use point, array, or both types of collector. The time-of-flight (TOF) instrument uses a special multichannel plate collector an ion trap can record ion arrivals either sequentially in time or all at once a Fourier-transform ion cyclotron resonance (FTICR) instrument can record ion arrivals in either time or frequency domains which are interconvertible (by the Fourier-transform technique). 

An added consideration is that the TOF instruments are easily and quickly calibrated. As the mass range increases again (m/z 5,000-50,000), magnetic-sector instruments (with added electric sector) and ion cyclotron resonance instruments are very effective, but their prices tend to match the increases in resolving powers. At the top end of these ranges, masses of several million have been analyzed by using Fourier-transform ion cyclotron resonance (FTICR) instruments, but such measurements tend to be isolated rather than targets that can be achieved in everyday use. 

FTICR. Fourier-transform ion cyclotron resonance GC/IRMS. gas chromatography isotope ratio mass spectrometry... 

Fig. 5. Schematic diagram of an fticr cell. The direction of the magnetic field, B is shown by the arrow (1).

To check the identity and purity of the products obtained in the above reactions it is not sufficient to analyze for the sulfur content since a mixture may incidentally have the same S content. Either X-ray diffraction on single crystals or Raman spectra of powder-like or crystalline samples will help to identify the anion(s) present in the product. However, the most convincing information comes from laser desorption Fourier transform ion cyclotron resonance (FTICR) mass spectra in the negative ion mode (LD mass spectra). It has been demonstrated that pure samples of K2S3 and K2S5 show peaks originating from S radical anions which are of the same size as the dianions in the particular sample no fragment ions of this type were observed [28]. 

Resolution does not affect the accuracy of the individual accurate mass measurements when no separation problem exists. When performing accurate mass measurements on a given component in a mixture, it may be necessary to raise the resolution of the mass spectrometer wherever possible. Atomic composition mass spectrometry (AC-MS) is a powerful technique for chemical structure identification or confirmation, which requires double-focusing magnetic, Fourier-transform ion-cyclotron resonance (FTICR) or else ToF-MS spectrometers, and use of a suitable reference material. The most common reference materials for accurate mass measurements are perfluorokerosene (PFK), perfluorotetrabutylamine (PFTBA) and decafluorotriph-enylphosphine (DFTPP). One of the difficulties of high-mass MS is the lack of suitable calibration standards. Reference inlets to the ion source facilitate exact mass measurement. When appropriately calibrated, ToF mass... 

B magnetic sector E = electric sector Q = quadrupole mass filter ToF = time-of-flight mass spectrometer IT = ion trap FTICR = Fourier-transform ion-cyclotron resonance. 

Figure 6.17 Temperature-resolved in-source pyrolysis FTICR-MS of flame-retarded polystyrene (56 spectra with a sampling interval of 1.1 s) from 300 K to 1200K. After Heeren and Boon [224], Reprinted from International Journal of Mass Spectrometry and Ion Processes, 157/158, R.M.A. Heeren and J.J. Boon, 391-403, Copyright (1996), with permission from Elsevier...

FTICR-MS is capable of powerful mixture analysis, due to its high mass range and ultrahigh mass resolving power. However, in many cases it is still desirable to couple a chromatographic interface to the mass spectrometer for sample purification, preconcentration, and mixture separation. In the example given above, DTMS under HRMS conditions provides the elementary composition. Apart from DTMS, PyGC-MS can be performed to preseparate the mixture of molecules and to obtain the MS spectrum of a purified unknown. Direct comparison with the pure reference compound remains the best approach to obtain final proof. 

Kenion et al. [225] used LD FTMS for direct analysis of a discoloured adhesive. MALDI-FTICR-MS is a direct way of examining molecular weight distributions. FTMS is not yet widely being used for industrial problem solving, despite long-lasting expectations. Instead, FTICR-MS is the method of... 

PyFT-IR", CuPyMS", GC-FTIR, LD, FTICR, PDMS, LMMS", SSIMS", PDA, SEM", STEM", ESEM, PIXE... 

FTICR Fourier-transform ion-cyclotron HETCOR Heteronuclear chemical... 

The use of CIEF in combination with FTICR has been demonstrated in an analysis of the E. coli proteome (Jensen et al., 1999). For these experiments, E. coli was grown in a medium depleted of rare isotopes in order to increase the mass measurement accuracy. The high abundance isotopes are present at approximately 98.89% 12C, 99.63% 14N and 99.985% H. For peptides, the presence of rare isotopes does not significantly change the spectra but with undigested proteins, mass accuracy can be limited by the broadened distribution of ions of any given protein due to the incorporation... 

Currently PCR and mass spectrometry are performed by two separate instruments. However, there is no reason why PCR followed by simple automated cleanup and mass spectrometry cannot be incorporated into a single integrated instrument. Essentially every configuration of the modern ESI mass spectrometer has been used successfully for the analysis of PCR products, from the highest to the lowest resolution involving. Fourier transform ion cyclotron resonance (FTICR), triple quadrupole, quadrupole-time of flight (Q-TOF), and ion trap.22-24 MS discriminates between two structurally related PCR products by MW difference. Mass accuracy is needed to differentiate the... 

Different mass analysers can be combined with the electrospray ionization source to effect analysis. These include magnetic sector analysers, quadrupole filter (Q), quadrupole ion trap (QIT), time of flight (TOF), and more recently the Fourrier transform ion cyclotron resonance (FTICR) mass analysers. Tandem mass spectrometry can also be effected by combining one or more mass analysers in tandem, as in a triple quadrupole or a QTOF. The first analyzer is usually used as a mass filter to select parent ions that can be fragmented and analyzed by subsequent analysers. 

Masselon, C. Tolmechev, A. V. Anderson, G. A. Harkewicz, R. Smith, R. D. Mass measurement errors caused by local frequency perturbations in FTICR mass spectrometry. J. Am. Soc. Mass Spectrom. 2002,13, 99-107. 

---