Friedel-Crafts acylation examples

Two ways of balancing a chemical eqnation Friedel-Crafts acylation example using aluminum trichloride as part of balanced chemical equation or as a catalyst. Note that E-total has the same value in both cases. 

The nitration, sulphonation and Friedel-Crafts acylation of aromatic compounds (e.g. benzene) are typical examples of electrophilic aromatic substitution. 

Cydopentane reagents used in synthesis are usually derived from cyclopentanone (R.A. Ellison, 1973). Classically they are made by base-catalyzed intramolecular aldol or ester condensations (see also p. 55). An important example is 2-methylcydopentane-l,3-dione. It is synthesized by intramolecular acylation of diethyl propionylsucdnate dianion followed by saponification and decarboxylation. This cyclization only worked with potassium t-butoxide in boiling xylene (R. Bucourt, 1965). Faster routes to this diketone start with succinic acid or its anhydride. A Friedel-Crafts acylation with 2-acetoxy-2-butene in nitrobenzene or with pro-pionyl chloride in nitromethane leads to acylated adducts, which are deacylated in aqueous acids (V.J. Grenda, 1967 L.E. Schick, 1969). A new promising route to substituted cyclopent-2-enones makes use of intermediate 5-nitro-l,3-diones (D. Seebach, 1977). 

A less obvious example of a situation in which the success of a synthesis depends on the order of introduction of substituents is illustrated by the preparation of m nitroace tophenone Here even though both substituents are meta directing the only practical synthesis is the one in which Friedel-Crafts acylation is carried out first... 

Friedel-Crafts Acylation. The Friedel-Crafts acylation procedure is the most important method for preparing aromatic ketones and thein derivatives. Acetyl chloride (acetic anhydride) reacts with benzene ia the presence of aluminum chloride or acid catalysts to produce acetophenone [98-86-2], CgHgO (1-phenylethanone). Benzene can also be condensed with dicarboxyHc acid anhydrides to yield benzoyl derivatives of carboxyHc acids. These benzoyl derivatives are often used for constmcting polycycHc molecules (Haworth reaction). For example, benzene reacts with succinic anhydride ia the presence of aluminum chloride to produce P-benzoylpropionic acid [2051-95-8] which is converted iato a-tetralone [529-34-0] (30). 

Another important use of BCl is as a Ftiedel-Crafts catalyst ia various polymerisation, alkylation, and acylation reactions, and ia other organic syntheses (see Friedel-Crafts reaction). Examples include conversion of cyclophosphasenes to polymers (81,82) polymerisation of olefins such as ethylene (75,83—88) graft polymerisation of vinyl chloride and isobutylene (89) stereospecific polymerisation of propylene (90) copolymerisation of isobutylene and styrene (91,92), and other unsaturated aromatics with maleic anhydride (93) polymerisation of norhornene (94), butadiene (95) preparation of electrically conducting epoxy resins (96), and polymers containing B and N (97) and selective demethylation of methoxy groups ortho to OH groups (98). 

A/ -Methoxycarbonyl-2-pyrroline undergoes Vilsmeier formylation and Friedel-Crafts acylation in the 3-position (82TL1201). In an attempt to prepare a chloropyrroline by chlorination of 2-pyrrolidone, the product (234) was obtained in 62% yield (8UOC4076). At pH 7, two molecules of 2,3-dihydropyrrole add together to give (235), thus exemplifying the dual characteristics of 2,3-dihydropyrroles as imines and enamines. The ability of pyrrolines to react with nucleophiles is central to their biosynthetic role. For example, addition of acetoacetic acid (possibly as its coenzyme A ester) to pyrroline is a key step in the biosynthesis of the alkaloid hygrine (236). 

Partial rate factors may be used to estimate product distributions in disubstituted benzene derivatives. The reactivity of a particular position in o-bromotoluene, for example, is given by the product of the partial rate factors for the corresponding position in toluene and bromobenzene. On the basis of the partial rate factor data given here for Friedel-Crafts acylation, predict the major product of the reaction of o-bromotoluene with acetyl chloride and aluminum chloride. 

Acylation (Section 12.7 and Chapter 20) Reaction in which an acyl group becomes attached to some structural unit in a molecule. Examples include the Friedel-Crafts acylation and the conversion of amines to amides. 

As an illustrating example for the application of the Friedel-Crafts acylation in the synthesis of complex molecules, its use in the synthesis of [2.2.2]cyclophane 13 by Cram and Truesdale shall be outlined. The reaction of [2.2]paracyclo-phane 10 with acetyl chloride gives the acetyl-[2.2]paracyclophane 11, which is converted into the pseudo-geminal disubstituted phane 12 by a Blanc reaction, and further to the triple bridge hydrocarbon 13 ... 

With a substituted aromatic ring compound 2, mixtures of isomeric coupling products may be formed the ort/zo-product usually predominates. The rules for regiochemical preferences as known from electrophilic aromatic substitution reactions (see for example Friedel-Crafts acylation), do not apply here. 

In an initial step the reactive formylating agent is formed from N,N-dimethylformamide (DMF) 2 and phosphorus oxychloride. Other N,N-disubstituted formamides have also found application for example A -methyl-A -phenylformamide is often used. The formylating agent is likely to be a chloromethyl iminium salt 4—also called the Vilsmeier complex (however its actual structure is not rigorously known)—that acts as the electrophile in an electrophilic substitution reaction with the aromatic substrate 1 (see also Friedel-Crafts acylation reaction) ... 

The first example of a Friedel-Crafts acylation reaction in a molten salt was carried out by Raudnitz and Laube [90]. It involved the reaction between phthalic anhydride and hydroquinone at 200 °C in NaCl/AlCl3 (X(A1C13) = 0.69) (Scheme 5.1-58). 

The Fries rearrangement can be viewed as a type of Friedel-Crafts acylation reaction. Two examples of this reaction are given in Scheme 5.1-61. The first is the rearrangement of 4,4 -diacetoxybiphenyl to 4,4 -dihydroxy-3,3 -diacetoxybiphenyl in a NaCl/AlCl3 (X(A1C13) = 0.69) molten salt [93]. The second example is the rearrangement of phenyl 3-chloropropionate to 2 -hydroxy-3-chloropropiophenone, followed by cyclization to an indanone [94]. 

The Friedel-Crafts acylation reaction has also been performed in iron(III) chloride ionic liquids, by Seddon and co-workers [96]. An example is the acetylation of benzene (Scheme 5.1-66). Ionic liquids of the type [EMIM]Cl/FeCl3 (0.50 < X(FeCl3) < 0.62) are good acylation catalysts, with the added benefit that the ketone product of the reaction can be separated from the ionic liquid by solvent extraction, provided that X(FeCl3) is in the range 0.51-0.55. 

Acidic chloroaluminate ionic liquids have already been described as both solvents and catalysts for reactions conventionally catalyzed by AICI3, such as catalytic Friedel-Crafts alkylation [35] or stoichiometric Friedel-Crafts acylation [36], in Section 5.1. In a very similar manner, Lewis-acidic transition metal complexes can form complex anions by reaction with organic halide salts. Seddon and co-workers, for example, patented a Friedel-Crafts acylation process based on an acidic chloro-ferrate ionic liquid catalyst [37]. 

Many organic chemical transformations have been carried out in ionic liquids hydrogenation [4, 5], oxidation [6], epoxidation [7], and hydroformylation [8] reactions, for example. In addition to these processes, numerous synthetic routes involve a carbon-carbon (C-C) bond-forming step. As a result, many C-C bondforming procedures have been studied in ambient-temperature ionic liquids. Among those reported are the Friedel-Crafts acylation [9] and allcylation [10] reactions, allylation reactions [11, 12], the Diels-Alder reaction [13], the Heck reaction [14], and the Suzuld [15] and Trost-Tsuji coupling [16] reactions. 

The chemistry of pyrrole is similar to that of activated benzene rings. In general, however, the heterocycles are more reactive toward electrophiles than benzene rings are, and low temperatures are often necessary to control the reactions. Halogenation, nitration, sulfonation, and Friedel-Crafts acylation can all be accomplished. For example ... 

An important use of the Friedel-Crafts acylation is to effect ring closure. This can be done if an acyl halide, anhydride, or acid group is in the proper position. An example is... 

Unlike alkylation, Friedel-Crafts acylation has been generally considered to be irreversible, but a number of instances of electrofugal acyl groups have been reported, especially where there are two ortho substituents, for example the hydro-de-benzoylation of 42. ... 

Friedel-Crafts acylation generally involves reaction of an acyl halide and Lewis acid such as A1C13, SbF5, or BF3. Bismuth(III) triflate is also a very active acylation catalyst.46 Acid anhydrides can also be used in some cases. For example, a combination... 

The first example of SILP-catalysis was the fixation of an acidic chloroaluminate ionic liquid on an inorganic support. The acidic anions of the ionic liquid, [AI2CI7] and [AI3CI10], react with free OH-groups of the surface to create an anionic solid surface with the ionic liquid cations attached [72]. The catalyst obtained was applied in the Friedel-Crafts acylation of aromatic compounds. Later, the immobilisation of acidic ionic liquids by covalent bonding of the ionic liquid cation to the surface was developed and applied again in Friedel-Crafts chemistry [73]. 

The electron-rich thiophene ring system can be elaborated into complex, fused thiophenes by acid-mediated intramolecular annelation reactions. For example, treatment of alcohol 96 with trimethylsilyl triflate promoted a Friedel-Crafts acylation and subsequent dehydration giving benzo[b]thiophene 97, a potential analgesic <00JMC765>. Treatment of ketone 98 with p-toluenesulfonic acid resulted in the formation of fused benzo[b]thiophene 99 <00T8153>. Another variant involved the cyclization of epoxide 100 to fused benzo[f>]thiophene 101 mediated by boron trifluoride-etherate . 

Acyl-transfer reactions are some of the most important conversions in organic chemistry and biochemistry. Recent work has shown that adjacent cationic groups can also activate amides in acyl-transfer reactions. Friedel-Crafts acylations are known to proceed well with carboxylic acids, acid chlorides (and other halides), and acid anhydrides, but there are virtually no examples of acylations with simple amides.19 During studies related to unsaturated amides, we observed a cyclization reaction that is essentially an intramolecular acyl-transfer reaction involving an amide (eq 15). The indanone product is formed by a cyclization involving the dicationic species (40). To examine this further, the related amides 41 and 42 were studied in superacid promoted conversions (eqs 16-17). It was found that amide 42 leads to the indanone product while 41... 

The presence of Lewis acidic species in chloroaluminate ionic liquids has also been used to bring about various acid catalysed transformations that do not require additional catalysts. For example, acidic ionic liquids are ideally suited to Friedel-Crafts acylation reactions. In a traditional Friedel-Crafts acylation an acylium ion is generated by reaction between acyl chloride and A1C13 or FeCL as shown in Scheme 10.7. 

Friedel-Crafts acylation fails with quinoline, isoquinoline, acridine and many derivatives. However, when sufficient activation is present substitution can result. For example, 8-methoxyquinoline (28) in the presence of aluminum chloride and acetyl or benzoyl chloride gives the 5-acetyl and 5-benzoyl derivatives in 25% and 35% yields respectively. 

---