Friedel alkylation aromatic

Alternatively the alkylated aromatic products may rearrange. -Butylbenzene [104-57-8] is readily isomerized to isobutylbenzene [538-93-2] and j Abutyl-benzene [135-98-8] under the catalytic effect of Friedel-Crafts catalysts. The tendency toward rearrangement depends on the alkylatiag ageat and the reaction conditions (catalyst, solvent, temperature, etc). 

Alkylation. Benzene and phenol feedstocks are readily alkylated under Friedel-Crafts conditions to prepare extensive families of alkylated aromatics. These materials generally are intermediates in the production of surfactants or detergents such as linear alkylbenzenesulfonate (LABS) and alkylphenolethoxylate (APE). Other uses include the production of antioxidants, plasticizers, and lube additives. 

Drawbacks as known from the Friedel-Crafts alkylation are not found for the Friedel-Crafts acylation. In some cases a decarbonylation may be observed as a side-reaction, e.g. if loss of CO from the acylium ion will lead to a stable carbenium species 8. The reaction product of the attempted acylation will then be rather an alkylated aromatic compound 9 ... 

The synthesis of an alkylated aromatic compound 3 by reaction of an aromatic substrate 1 with an alkyl halide 2, catalyzed by a Lewis acid, is called the Friedel-Crafts alkylation This method is closely related to the Friedel-Crafts acylation. Instead of the alkyl halide, an alcohol or alkene can be used as reactant for the aromatic substrate under Friedel-Crafts conditions. The general principle is the intermediate formation of a carbenium ion species, which is capable of reacting as the electrophile in an electrophilic aromatic substitution reaction. 

The Friedel-Crafts allcylation reaction usually involves the interaction of an allcy-lation agent such as an alkyl halide, alcohol, or alkene with an aromatic compound, to form an alkylated aromatic compound (Scheme 5.1-44). 

Ethylene is an active alkylating agent. It can be used to alkylate aromatic compounds using Friedel-Crafts type catalysts. Commercially,... 

Typically, the reaction mechanism proceeds as follows [6], By photoreaction, two chlorine radicals are formed. These radicals react with the alkyl aromatic to yield a corresponding benzyl radical. This radical, in turn, breaks off the chlorine moiety to yield a new chlorine radical and is substituted by the other chlorine, giving the final product. Too many chlorine radicals lead to recombination or undesired secondary reactions. Furthermore, metallic impurities in micro reactors can act as Lewis catalysts, promoting ring substitution. Friedel-Crafts catalyst such as FeClj may induce the formation of resin-Uke products. 

TeClf catalysed Friedel-Crafts aromatic alkylation (typical procedure. To a solution of 1-phenylethanol (3.7 g, 30 mmol) in toluene (30 mL) is added slowly TeCl4 (9.7 g, 36 mmol), keeping the temperature at 25°C (exothermic reaction). Small amounts of white precipitate appear immediately, and after a few minutes the colour of the mixture becomes dark brown. The mixture is stirred for 3 h and then quenched with HgO (20 mL). The organic layer is separated, washed with brine (2x20 mL) and dried (MgS04). Evaporation of the solvent leaves an oily residue which is distilled under vacuum, giving a mixture of 1-phenyl-1-tolylethanes (4.9 g (83.3%) b.p. 117-128°C/1 torr). GLC analysis (silicone OV-101, 0.24 mm X 30 m capillary column at 100-260°C, 4°C min i) reveals an ortholpara ratio of 12 88. 

At higher temperatures, C—H and C—C bonds may be similarly broken. Thus, zeolite catalysts may be used for (i) alkylation of aromatic hydrocarbons (cf. the Friedel-Crafts reactions with AICI3 as the Lewis acid catalyst), (ii) cracking of hydrocarbons (i.e., loss of H2), and (Hi) isomerization of alkenes, alkanes, and alkyl aromatics. 

Preparative use could be made also from the perturbed redox catalysis (Eqs. (84)—(86), (93)-(95). For example, alkylated aromatic hydrocarbons that are difficult to obtain by Friedel-Crafts alkylation could be synthesized in this way. The most suitable alkylating agent is tert-butyl chloride or bromide -ass) alkyla-... 

Frequently substantially more than catalytic amounts of a Lewis acid metal halide are required to effect Friedel-Crafts alkylation. This is due partly to complex formation between the metal halide and the reagents or products, especially if they contain oxygen or other donor atoms. Another reason is the formation of red oils. Red oils consist of protonated (alkylated) aromatics (i.e., arenium ions) containing metal halides in the counterions or complexed with olefin oligomers. This considerable drawback, however, can be eliminated when using solid acids such as clays,97 98 zeolites (H-ZSM-5),99,100 acidic cation-exchange resins, and perfluoro-alkanesulfonic acid resins (Nafion-H).101-104... 

Alkylation. Friedel-Crafts alkylation (qv) of benzene with ethylene or propylene to produce ethylbenzene [100-41 -4], CgH10, or isopropylbenzene [98-82-8], C9H12 (cumene) is readily accomplished in the liquid or vapor phase with various catalysts such as BF3 (22), aluminum chloride, or supported polyphosphoric acid. The oldest method of alkylation employs the liquid-phase reaction of benzene with anhydrous aluminum chloride and ethylene (23). Ethylbenzene is produced commercially almost entirely for styrene manufacture. Cumene [98-82-8] is catalytically oxidized to cumene hydroperoxide, which is used to manufacture phenol and acetone. Benzene is also alkylated with C1Q—C20 linear alkenes to produce linear alkyl aromatics. Sulfonation of these compounds produces linear alkane sulfonates (LAS) which are used as biodegradable deteigents. 

Oxetanes have also been used as alkylating agents in the Friedel-Crafts reaction for example, 2-isopropyloxetane was reacted with benzene in superacidic trifluoromethanesulfonic acid (TFSA) to give a mixture of alkylated aromatic products (Equation 9) <2003CAL1>. The main product of the reaction was the tetralin derivative 46 which could be isolated in up to 75% yield. Other notable side products are shown, resulting from monoalkylation or other skeletal rearrangements. 

The Friedel-Crafts alkylation and acylation are of very little, if any, synthetic interest when applied to heterocyclic aromatic bases the substitution of protonated heterocycles by nucleophilic carbon-centered radicals is instead successful. This reaction, because of the dominant polar effect which is mainly related to the charge-transfer character of the transition state (Scheme 1), reproduces most of the aspects of the Friedel-Crafts aromatic substitution, but reactivity and selectivity are the opposite. 

Figure 17.50 shows how a benzyl alkoxide can be reduced in this way. Here, the reduction is part of the synthesis of an alkylated aromatic system. The target molecule contains a primary alkyl group. It is not possible to introduce this alkyl group by way of a Friedel-Crafts alkylation into the ortho-position of anisole in a regioselective fashion and without rearrangements (see Section 5.2.5). 

The chlorination of alkyl aromatics by sulfuryl chloride promoted by free-radical initiators, which was originally discovered by Kharasch and Brown990, can be modified by incorporation of transition metal complexes. Matsumoto and coworkers have observed that, upon addition of Pd(PPh3)4, in place of a radical initiator, the side-chain monochlorination of toluene is substantially more selective991. Davis and his colleagues992 have extended this study and report that Pt(0) and Pd(0) are effective initiators for side-chain chlorination of toluene by sulfuryl chloride and dichlorine. Mn, Re, Mo and Fe complexes, on the other hand, behave more like Friedel-Crafts catalysts. Gas-phase chlorination of olefins to allyl chlorides is catalyzed by PdCl2 or by PtCl2993. 

In the laboratory, we must often alkylate aromatic compounds that are more expensive than benzene. Because we cannot afford to use a large excess of the starting material, a more selective method is needed. Fortunately, the Friedel-Crafts acylation, discussed in Section 17-11, introduces just one group without danger of polyalkylation or rearrangement. 

The procedure described here is typical for the catalytic alkylation of aromatic ketones at the ortho position by alkenes. Aromatic ketones are readily available by Friedel-Crafts acylation and many other methods, and many of these ketones are suitable substrates for the present catalytic alkylation with alkenes affording the corresponding ortho-alkylated ketones. The present method provides a direct way to alkylate aromatics with olefins. Moreover, the C-C bond formation takes place with exclusive ortho selectivity, while mixtures of 0-, m-, p-isomers are usually obtained in the conventional Friedel-Crafts alkylation of aromatic compounds. 

Shudo and coworkers have reported that 0,0-diprotonated nitroalkenes (16) behave as novel electrophilic species which can efficiently alkylate aromatics such as benzene, anisole, chlorobenzene, naphthalene, etc. under extremely mild conditions (equation 28). The reaction enables the synthesis of a-arylated ketones (17) which are difficult to synthesize by conventional Friedel-Crafts reactions. 

Since 1972, updates on Friedel-Crafts alkylation, aromatic aldehyde synthesis, nitration, etc., were regularly published in books and extensive reviews. However, improvements in Friedel-Crafts acylations were scantly considered, despite the great practical application of the aromatic ketones in different fields of the fine and pharmaceutical chemistry. 

---