Fourier transform infrared spectroscopy instruments

In addition to covering Raman microscopy, this book has a wealth of information on Raman instrumentation in general. Elving P J and Winefordner J D (eds) 1986 Fourier Transform Infrared Spectroscopy (New York Wiley)... 

In-situ Fourier transform infrared spectroscopy. The final technique in this section concerns the FTIR approach which is based quite simply on the far greater throughput and speed of an FTIR spectrometer compared to a dispersive instrument. In situ FTIR has several acronyms depending on the exact method used. In general, as in the EMIRS technique, the FTIR-... 

One of the major obstacles to investigating ultrathin polymer films is the small amount of detectable sample material and, as a result, high instrument sensitivity is crucial. Although polarized Fourier Transform Infrared Spectroscopy (13.141 has... 

The principal reasons for choosing Fourier transform infrared spectroscopy are first, that these instruments record all wavelengths simultaneously and thus operate with maximum efficiency and, second, that Fourier transform infrared spectroscopy spectrometers have a more convenient optical geometry than do dispersive infrared instruments. These two facts lead to the following advantages. 

The wavelengths of IR absorption bands are characteristic of specific types of chemical bonds. In the past infrared had little application in protein analysis due to instrumentation and interpretation limitations. The development of Fourier transform infrared spectroscopy (FUR) makes it possible to characterize proteins using IR techniques (Surewicz et al. 1993). Several IR absorption regions are important for protein analysis. The amide I groups in proteins have a vibration absorption frequency of 1630-1670 cm. Secondary structures of proteins such as alpha(a)-helix and beta(P)-sheet have amide absorptions of 1645-1660 cm-1 and 1665-1680 cm, respectively. Random coil has absorptions in the range of 1660-1670 cm These characterization criteria come from studies of model polypeptides with known secondary structures. Thus, FTIR is useful in conformational analysis of peptides and proteins (Arrondo et al. 1993). 

The transform from the interferogram to the spectrum is carried out by the dedicated minicomputer on the instrument. The theory of Fourier-transform infrared spectroscopy has been treated, and is readily available in the literature.21,22,166 Consequently, the advantages of F.t.-i.r. dispersive spectroscopy will only be outlined in a qualitative sense (i) The Fellgett or multiplex advantage arises from the fact that the F.t.-i.r. spectrometer examines the entire spectrum in the same period of time as that required... 

Fourier Transform Infrared Spectroscopy (FT-IR) measurements were made using a Nicolet Instruments 740 FT-IR spectrometer. A horizontal attenuated toted reflectance cell equipped with a 45° zinc-selenide crystal trough wets used. Spectra of neat solutions were obtained by co-addition of 256 scans at 4 cm- resolution. 

In THE PAST DECADE, IMPROVEMENTS IN infrared spectroscopic instrumentation have contributed to significant advances in the traditional analytical applications of the technique. Progress in the application of Fourier transform infrared spectroscopy to physiochemical studies of colloidal assemblies and interfaces has been more uneven, however. While much Fourier transform infrared spectroscopic work has been generated about the structure of lipid bilayers and vesicles, considerably less is available on the subjects of micelles, liquid crystals, or other structures adopted by synthetic surfactants in water. In the area of interfacial chemistry, much of the infrared spectroscopic work, both on the adsorption of polymers or proteins and on the adsorption of surfactants forming so called "self-assembled" mono- and multilayers, has transpired only in the last five years or so. 

The remaining useful life evaluation routine (RULER) is a useful monitoring program for used engine oils. The RULER system is based on a voltammetric method (Jefferies and Ameye, 1997 Kauffman, 1989 and 1994). The data allows the user to monitor the depletation of two additives ZDDP and the phenol/amineH+ antioxidant. The RULER results were compared to other standard analytical techniques, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), total base number (TBN), total acid number (TAN), and viscosity to determine any correlation between the techniques (Jefferies and Ameye, 1997 and 1998). The test concluded that the RULER instrument can... 

An integrated GC/IR/MS instrument is a powerful tool for rapid identification of thermally generated aroma compounds. Fourier transform infrared spectroscopy (GC/IR) provides a complementary technique to mass spectrometry (MS) for the characterization of volatile flavor components in complex mixtures. Recent improvements in GC/IR instruments have made it possible to construct an integrated GC/IR/HS system in which the sensitivity of the two spectroscopic detectors is roughly equal. The combined system offers direct correlation of IR and MS chromatograms, functional group analysis, substantial time savings, and the potential for an expert systems approach to identification of flavor components. Performance of the technique is illustrated with applications to the analysis of volatile flavor components in charbroiled chicken. 

Fourier transform infrared spectroscopy (FTIR) has provided support to a number of areas in Diamond Shamrock s pesticide program. Commercially available FTIR spectrometers offer a number of advantages over dispersive instruments. Although some of the advantages are related to the ability to perform computerized data manipulations, the basic design of the FTIR system does provide superior capabilities in infrared spectroscopy (1). ... 

Infrared spectroscopy (IR) is one of the oldest instrumental analytical techniques but its value in structural analysis has decreased with the rise of nuclear magnetic resonance (NMR) spectroscopy and mass spectrometry (MS). Compared to the traditional dispersive IR techniques, Fourier transform infrared spectroscopy (FTIR) offers more sampling techniques. 

There are a few liquid chromatography/Fourier transform infrared spectroscopy (LC/FT1R) instruments commercially available, but there are so far no published applications on the analysis of chemicals... 

Pakdel H, Grandmaison JL, Roy C (1989) Analysis of wood vacuum pyrolysis solid residues by diffuse reflectance infrared Fourier transform spectrometry Can J Chem 67 310-314 Perkins WD (1986) Fourier transform-infrared spectroscopy Part I Instrumentation J Chem Educ 63 A5-A10... 

Between the source and the detector is put either monochromators used in dispersive instruments or interferometers used in Fourier transform infrared (FT-IR) instruments. In a dispersive instrument the intensity at each wavenumber is measured one by one in sequence and only a small spectral range falls on the detector at any one time. In a FT-IR instrument the intensities of all the wavenumbers are measured simultaneously by the detector. Fourier transform infrared spectroscopy offers some advantages compared to dispersive instruments, namely (i) higher signal-to-noise ratios for spectra obtained under conditions of equal measurement time, and (ii) higher accuracy in frequency for spectra recorded over a wide range of frequencies. Therefore we will give below a brief picture of the principle of FT-IR spectroscopy, based on a Michelson interferometer (Fig. 2). 

---