Fluoride water sources

The nucleophile for which increased reactivity is most critical is the fluoride ion [3,4], Water molecules bind tightly to this ion, and their presence dramatically reduces its effective nucleophilicity. A variety of fluoride ion sources have been used in an effort to improve product yields in deoxyfluoro sugar synthesis [26,34]. The yields of substitution and elimination products generated from reactions with fluoride ion from several sources are listed in Table 2 [26]. Currently, the most attractive source of fluoride ion is tris(dimethylanuno)-5ulfur (trimetbylsilyl)difluoride (TASF), which is soluble in a variety of oiganic solvents and produces an anhydrous fluoride ion [33]. 

The original methods for directed aldol and aldol-type reactions of aldehydes and acetals with silyl enolates required a stoichiometric amount of a Lewis acid such as TiCh, Bl i-OI y, or SnCl.j [18]. Later studies have introduced many Lewis acids which accelerate these processes with a catalytic quantity (vide infra). In addition, it has been found that fluoride ion sources also work as effective catalysts of the aldol reaction [19]. In the last decade, much attention has been paid for the development of diastereo- and enantioselective aldol reactions [20, 21], aqueous aldol reactions using water-stable Lewis acids [22], and novel types of silyl enolate with unique reactivity. 

When dimethyl l-(trimethylsilyl)benzylphosphonate is treated with benzaldehyde in the presence of a fluoride ion source (CsF, KF, or TBAF), stilbene and dimethyl benzylphosphonate, a protodesilylation product, are produced. The best yield of stilbene (85%) is obtained on heating in THF for 1 day with freshly dried CsF. Use of MeCN gives a similar result, whereas in toluene the reaction becomes very slow. KF is less effective even in the presence of 18-crown-6 ether. TBAF is efficient at room temperature however, the yield seems to be modest because of difficulty in drying "0 or the existence of acidic hydrogen, easily transmetallated by the resulting carbanion. When CsF or KF is used, only ( )-stilbene is obtained, whereas TBAF afforded a mixture of (Eland (Z)-stilbene in a 90/10 ratio. The formation of dimethyl benzylphosphonate seems to result from protonation by water that still remained in the system, and the yield of the olefin becomes water dependent. In the case of the reaction with isobutyraldehyde, the corresponding olefin is obtained in low yield (35%) as an mixture (70/30). By contrast, cinnamaldehyde gives... 

A. Specific levels. The normal semm fluoride concentration is less than 20 mcg/L (ng/mL) but varies considerably with diet and water source. Serum fluoride concentrations are generally difficult to obtain and thus are of limited utility for acute overdose management. 

Opinion favours the steady flow of saliva as the main source of plaque fluoride, even though saliva contains only 0-01 to 0-02 ppm of fluoride or even less. Smaller amounts are believed to be derived from the intermittent exposure of the plaque to food and drink. Calculations show that the absolute amounts of fluoride in plaque are very small for example, the total amount present in 10 mg of plaque containing 20 ppm is equivalent to that present in only 10-20 ml of saliva or 0-2 ml of fluoridated water. 

Nowadays, water is a limited natural resource and in many cases there is a lack of water with the desired quality for both industrial and domestic use. Population growth and industrialization have led to a reduction of surface water sources, forcing populations around the world to depend on groundwater sources. Both types of water are not suitable for direct consumption due to high salt concentrations and in some cases also to naturally occurring hazardous contaminants, such as arsenic (As), fluoride (F ) and uranium (U) (US NRC, 1984). Therefore, extensive treatments are required prior to consumption. Another source of water is the one that can be obtained with appropriate treatments of both industrial and municipal wastewater. 

In addition to fluoridated water, some other sources of significant amounts of fluoride are (1) the environments around aluminum refining plants and (2) the consumption of tea, crude sea salt, bone meal, or fish (particularly, fish bones). However, the effects of excess fluoride may be reduced somewhat by diets rich in calcium and magnesium. 

Binary Compounds. The mthenium fluorides are RuF [51621 -05-7] RuF [71500-16-8] tetrameric (RuF ) [14521 -18-7] (15), and RuF [13693-087-8]. The chlorides of mthenium are RUCI2 [13465-51-5] an insoluble RuCl [10049-08-8] which exists in an a- and p-form, mthenium trichloride ttihydrate [13815-94-6], RuCl3-3H2 0, and RuCl [13465-52-6]. Commercial RuCl3-3H2 0 has a variable composition, consisting of a mixture of chloro, 0x0, hydroxo, and often nitrosyl complexes. The overall mthenium oxidation state is closer to +4 than +3. It is a water-soluble source of mthenium, and is used widely as a starting material. Ruthenium forms bromides, RuBr2 [59201-36-4] and RuBr [14014-88-1], and an iodide, Rul [13896-65-6]. 

Minerals and Ash. The water-soluble extract solids which iafuse from tea leaves contain 10—15% ash. The tea plant has been found to be rich in potassium (24) and contains significant quantities of calcium, magnesium (25), and aluminum (26). Tea beverages are also a significant source of fluoride (27), owing in part to the uptake of aluminum fluoride from soils (28,29). 

Eluoride added to a compatible dentifrice base at a level of 1000 ppm has been clinically proven to reduce the incidence of dental caries by about 25% on average, even in areas where the water supply is fluoridated (4). Elevation to 1500 ppm increases the protection. Sources of fluoride approved for use in dentifrices are sodium fluoride [7681-49-4] (0.22%), sodium monofluorophosphate (0.76%), and stannous fluoride [7783-47-3] (0.41%). The Eood and Dmg Administration regulates fluoridated dentifrices as dmgs and has estabUshed parameters for safe and effective products. CompatibiUty of the fluoride with the abrasive is an important requirement. 

The harmful effects of air pollutants on human beings have been the major reason for efforts to understand and control their sources. During the past two decades, research on acidic deposition on water-based ecosystems has helped to reemphasize the importance of air pollutants in other receptors, such as soil-based ecosystems (1). When discussing the impact of air pollutants on ecosystems, the matter of scale becomes important. We will discuss three examples of elements which interact with air, water, and soil media on different geographic scales. These are the carbon cycle on a global scale, the sulfur cycle on a regional scale, and the fluoride cycle on a local scale. 

The movement of fluoride through the atmosphere and into a food chain illustrates an air-water interaction at the local scale (<100 km) (3). Industrial sources of fluoride include phosphate fertilizer, aluminum, and glass manufacturing plants. Domestic livestock in the vicinity of substantial fluoride sources are exposed to fluoride by ingestion of forage crops. Fluoride released into the air by industry is deposited and accumulated in vegetation. Its concentration is sufficient to cause damage to the teeth and bone structure of the animals that consume the crops. 

Agents Shut off gas source use water to cool adjacent combustibles Fire Extinguishing Agents Not to be Used Data not available Special Hazards of Combustion Products Irritating hydrogen fluoride fumes may form in fire Behavior in Fire Containers may explode. Vapors are heavier than air And may travel a considerable distance Ignition Temperature Data not available Electrical Hazard Data not available Burning Rate Not pertinent. 

In the case of molten salts, the functional electrolytes are generally oxides or halides. As examples of the use of oxides, mention may be made of the electrowinning processes for aluminum, tantalum, molybdenum, tungsten, and some of the rare earth metals. The appropriate oxides, dissolved in halide melts, act as the sources of the respective metals intended to be deposited cathodically. Halides are used as functional electrolytes for almost all other metals. In principle, all halides can be used, but in practice only fluorides and chlorides are used. Bromides and iodides are thermally unstable and are relatively expensive. Fluorides are ideally suited because of their stability and low volatility, their drawbacks pertain to the difficulty in obtaining them in forms free from oxygenated ions, and to their poor solubility in water. It is a truism that aqueous solubility makes the post-electrolysis separation of the electrodeposit from the electrolyte easy because the electrolyte can be leached away. The drawback associated with fluorides due to their poor solubility can, to a large extent, be overcome by using double fluorides instead of simple fluorides. Chlorides are widely used in electrodeposition because they are readily available in a pure form and... 

Fig. 5 Main contamination sources identified by PCA for sediments, fish, and suface water in the Ebro River basin, and explained variances for each principal component. Variable identification. Organic compounds in sediments 1, summatory of hexachlorocyclohexanes (HCHs) 2, summa-tory of DDTs (DDTs) 3, hexachlorobenzene (HCB) 4, hexachlorobutadiene (HCBu) 5, summatory of trichlorobenzenes (TCBs) 6, naphthalene 7, fluoranthene 8, benzo(a)pyrene 9, benzo(b) fluoranthene 10, benzo(g,h,i)perylene 11, benzo(k)fluoranthene 12, indene(l,2,3-cd)pyrene. Organic compounds in fish 1, hexachlorobenzene (HCB) 2, summatory of hexachlorocyclohexanes (HCHs) 3, o,p-DDD 4, o,p-DDE 5, o,p-DDT 6, p,p-DDD 7, />,/>DDE 8, />,/>DDT 9, summatory of DDTs (DDTs) 10, summatory of trichlorobenzenes (TCBs) 11, hexachlorobutadiene (HCBu) 12, fish length. Physico-chemical parameters in water 1, alkalinity 2, chlorides 3, cyanides 4, total coliforms 5, conductivity at 20°C 6, biological oxygen demand 7, chemical oxygen demand 8, fluorides 9, suspended matter 10, total ammonium 11, nitrates 12, dissolved oxygen 13, phosphates 14, sulfates 15, water temperature 16, air temperature...

In an attempt to produce TS-1 at low cost, alternative, cheaper sources of Ti and Si and other bases such as binary mixtures of (tetrabutylammonium and tetraethylammonium hydroxides), (tetrabutylphosphonium and tetraethylpho-sphonium hydroxides), (tetrapropylammonium bromide and ammonia, water, hexanediamine, n-butylamine, diethylamine, ethylenediamine, or triethanolamine) in place of TPAOH have been used (284—294). TS-1 was synthesized in the presence of fluoride ions but the material thus formed contained extraframework Ti species (295-297). 

Dissolved titanium method. Hydrothermal synthesis using tetrapropylammonium peroxytitanate (prepared from TEOT, distilled water, 30% aqueous H2O2, and 25% aqueous TPAOH) as the source of Ti and colloidal silica (Ludox AS-40) as the source of Si and TPAOH as template. All additions done at 278 K Preparation using TiCl2, 14% aqueous TPAOH, 30% colloidal silica, and demineralized water Preparation at low pH using fluoride ions as mineralizing agent... 

---