Fischer technologies

Germany Uhde Inventa-Fischer technology for BASF SE," 2008. "A new highly economic Polyester Technology > 2R single-stream PET process," Chemical Fibers Int l and Int l Fiber Journal, 2004. 

Metha.nol-to-Ga.soline, The most significant development in synthetic fuels technology since the discovery of the Fischer-Tropsch process is the Mobil methanol-to-gasoline (MTG) process (47—49). Methanol is efftcientiy transformed into C2—C q hydrocarbons in a reaction catalyzed by the synthetic zeoHte ZSM-5 (50—52). The MTG reaction path is presented in Figure 5 (47). The reaction sequence can be summarized as... 

SASOL. SASOL, South Africa, has constmcted a plant to recover 50,000 tons each of 1-pentene and 1-hexene by extractive distillation from Fischer-Tropsch hydrocarbons produced from coal-based synthesis gas. The company is marketing both products primarily as comonomers for LLDPE and HDPE (see Olefin polymers). Although there is still no developed market for 1-pentene in the mid-1990s, the 1-hexene market is well estabhshed. The Fischer-Tropsch technology produces a geometric carbon-number distribution of various odd and even, linear, branched, and alpha and internal olefins however, with additional investment, other odd and even carbon numbers can also be recovered. The Fischer-Tropsch plants were originally constmcted to produce gasoline and other hydrocarbon fuels to fill the lack of petroleum resources in South Africa. 

J. H. Carstensen and P. S. Pedersen, "New Developments in HTS Catalyst Technology Solve the Fischer Tropsch Problem," AIChE Ammonia Safety Symposium, San Francisco, Calif., Nov. 1989, American Institute of Chemical Engineers, New York, 1990. 

Propanol has been manufactured by hydroformylation of ethylene (qv) (see Oxo process) followed by hydrogenation of propionaldehyde or propanal and as a by-product of vapor-phase oxidation of propane (see Hydrocarbon oxidation). Celanese operated the only commercial vapor-phase oxidation faciUty at Bishop, Texas. Since this faciUty was shut down ia 1973 (5,6), hydroformylation or 0x0 technology has been the principal process for commercial manufacture of 1-propanol ia the United States and Europe. Sasol ia South Africa makes 1-propanol by Fischer-Tropsch chemistry (7). Some attempts have been made to hydrate propylene ia an anti-Markovnikoff fashion to produce 1-propanol (8—10). However, these attempts have not been commercially successful. 

The principal advance ia technology for SASOL I relative to the German Fischer-Tropsch plants was the development of a fluidized-bed reactor/regenerator system designed by M. W. Kellogg for the synthesis reaction. The reactor consists of an entrained-flow reactor ia series with a fluidized-bed regenerator (Fig. 14). Each fluidized-bed reactor processes 80,000 m /h of feed at a temperature of 320 to 330°C and 2.2 MPa (22 atm), and produces approximately 300 m (2000 barrels) per day of Hquid hydrocarbon product with a catalyst circulation rate of over 6000 t/h (49). 

Fischer-Tropsch Synthesis The best-known technology for producing hydrocarbons from synthesis gas is the Fischer-Tropsch synthesis. This technology was first demonstrated in Germany in 1902 by Sabatier and Senderens when they hydrogenated carbon monoxide (CO) to methane, using a nickel catalyst. In 1926 Fischer and Tropsch were awarded a patent for the discovery of a catalytic technique to convert synthesis gas to liquid hydrocarbons similar to petroleum. 

The largest Fischer-Tropsch facility based on natural gas is the Mossgas plant located in Mossel Bay, South Africa. Natural gas is converted to synthesis gas in a two-stage reformer and subsequently converted to hydrocarbons by SASOL s Synthol technology. The plant, commissioned in 1992, has a capacity of 7155 mVd (45,000 bbFd). 

The indirect liquefaction basehne design is for a plant of similar size. Unhke the direct hquefaction basehne, the design focuses on producing refined transportation fuels by use of Sheh gasification technology. Table 27-17 shows that the crude oil equivalent price is approximately 216/m ( 34/bbl). Additional technological advances in the production of synthesis gas, the Fischer-Tropsch synthesis, and product refining have the potential to reduce the cost to 171/m ( 27/bbl) (1993 US dollars), as shown in the second column of Table 27-17. 

As an example of the chemical signihcance of the process technology, the products of die Fischer-Tropsch synthesis, in which a signihcant amount of gas phase polymerization occurs vary markedly from hxed bed operation to the fluidized bed. The hxed bed product contains a higher proportion of straight chain hydrocarbons, and the huidized bed produces a larger proportion of branched chain compounds. 

J.R. Anderson and M. Boudait (eds), Catalysis, Science and Technology, Several volumes. Springer Verlag, Berlin TP156 C35 C375 Volume 1 M.E. Diy, The Fischer-Tropsch synthesis, pp. 160-255. 

U. IL F. Sander, H. Fischer, U. Rcthe and R. Kola, (Engl. edn. prepared by A. I. More), Sulfur, Sulfur Dioxide, Su unc Acid Induslrkd Chemistry a>id Technology, Brili.sh Sulfur Corporation, London, 1984, 428 pp. 

Synthesis gas is an important intermediate. The mixture of carbon monoxide and hydrogen is used for producing methanol. It is also used to synthesize a wide variety of hydrocarbons ranging from gases to naphtha to gas oil using Fischer Tropsch technology. This process may offer an alternative future route for obtaining olefins and chemicals. The hydroformylation reaction (Oxo synthesis) is based on the reaction of synthesis gas with olefins for the production of Oxo aldehydes and alcohols (Chapters 5, 7, and 8). 

Fischer Tropsch technology is best exemplified by the SASOL projects in South Africa. After coal is gasified to a synthesis gas mixture, it is purified in a rectisol unit. The purified gas mixture is reacted in a synthol unit over an iron-based catalyst. The main products are gasoline, diesel fuel, and jet fuels. By-products are ethylene, propylene, alpha olefins, sulfur, phenol, and ammonia which are used for the production of downstream chemicals. 

Dry, M. E., The Fischer Tropsch Synthesis, in Catalysis Science and Technology, edited hy J. R. Anderson and M. Boudart, Springer Verlag, 1981. 

Many chemicals are produced from synthesis gas. This is a consequence of the high reactivity associated with hydrogen and carhon monoxide gases, the two constituents of synthesis gas. The reactivity of this mixture was demonstrated during World War II, when it was used to produce alternative hydrocarbon fuels using Fischer Tropsch technology. The synthesis gas mixture was produced then hy gasifying coal. Fischer Tropsch synthesis of hydrocarbons is discussed in Chapter 4. 

Marks TJ, Fragala IL (eds) (1985) Fundamental and technological aspects of the f-elements Reidel, Dordrecht, Organometallics of the f-elements, Marks TJ, Fischer RD (eds) (1979) Reidel, Dordrecht... 

The Fischer-Tropsch process has attracted renewed interest as a way to produce high quality, sulfur-free diesel fuel from natural gas and, possibly, an opportunity to utilize natural gas at remote oilfields. The process represents proven technology and is regarded as an alternative for when oil may no longer be widely available, and one has to resort to natural gas and coal. In a really futuristic scenario one may even contemplate the use of GO and H2 produced by photo-catalytic dissociation of GO2 and water. 

Furthermore, vast reserves, such as tar sand and gas hydrates, await technology to enable their economically and environmentally sound exploitation. Large coal reserves can also be exploited, for example through gasification and Fischer-Tropsch synthesis. 

Von Fischer, W. (1948), Paint and Varnish Technology, Reinhold, New York. 

This section covers recent advances in the application of three-phase fluidization systems in the petroleum and chemical process industries. These areas encompass many of the important commercial applications of three-phase fluidized beds. The technology for such applications as petroleum resid processing and Fischer-Tropsch synthesis have been successfully demonstrated in plants throughout the world. Overviews and operational considerations for recent improvements in the hydrotreating of petroleum resids, applications in the hydrotreating of light gas-oil, and improvements and new applications in hydrocarbon synthesis will be discussed. 

---