Final Report Package

The Final Report, completed protocols, and all supporting documentation are then gathered into a Final Report Package for review, approval, and retention. 

Franklin Associates (2010). Final Report. Life cycle inventory of 100% postconsumer HOPE and PET recycled resin from postconsumer containers and packaging. 

A number of computer software packages are available to the analyst to assist in the planning and execution of both method development and validation experiments. The attraction of these systems is that they can automate the validation process from planning the experiment to test execution to the presentation of the data in a final report form. 

The OQ final report is intended to summarize all relevant data that are collected during the validation run. The report gives a short description of all test functions and a discussion of the overall validation. This compilation is adequate documentation of assurance of the acceptability and validity of the packaging equipment. The basis for this assurance is the result of the data, test functions, and supporting documentation. A dossier in sections is provided in Table 5. 

It may take years for a company to compile and submit a regulatory package of completed studies in support of an application. Thus, data storage and retrieval are important. All raw data, documentation, records, protocols, specimens, and final reports generated as a result of a study should be retained. Specimens obtained from mutagenicity tests, specimens of soil, water, and plants, and wet specimens of blood, urine, feces, and biologic fluids, need not be retained after QA verification.6-8... 

EU (2005) Work Package 1. Development of the concept of exposure scenarios. General framework of exposure scenarios. Scoping study for technical guidance document on preparing the chemical safety report under REACH, final report. European Union, European Chemicals Bureau (REACH Implementation Project 3.2-1A Lot 1 Commission Service Contract No. 22551-2004-12 FISC ISP BE ... 

Castle L. 1997, Final Report of EU project A1R2-CT93-1014 Program to establish criteria to ensure the quality and safety of recycled and re-used plastics for food packaging." Brussels Agro-Industrial Research Programme, December 1997 (available from l.castle csl.gov.uk). 

FAIR-Project PL 98-4170. Actipak Evaluating safety, effectiveness, economic-environmental impact and consumer acceptance of active and intelligent packaging. Duration 1998-2001. Final report 2003. 

This analysis produced a list of radionuclides for each waste stream that need to be reported with uncertainties because current estimates in the Nirex inventory of the radionuclides exceed their GQs," This information is summarised in Table 1 where it is broken down first into mobile and solid wastes and then into packages and their ensembles. A total of 43 radionuclides in solid waste streams and 40 radionuclides in mobile waste streams were found whose activity concentration in the final waste package exceeded either the package GQp or collection GQc- A final superset of 49 radionuclides is shown including radionuclides from both lists. Examination of the superset showed that most of these nuclides are either... 

F. Lox (ed.). Waste Management—Life Cycle Analysis of Packaging, Final Report. Study Realised by the Consortium Vrije Universiteit Brussel, Vlaamse Inslclling voor Tech-nologisch Onderzoek, Belgian Packaging Institute, for the European Commission, DG XI/A/4, 1994. 

If changes are made prior to approval of the Final Report, the Change Control documentation must be included in the Validation Packages, and the change and its justification must be documented in the Final Report. 

Enhanced turn-over package Installation qualification protocols Operational qualification protocols Change control initiation Cycle development Performance qualification protocol Process validation protocols Validation final reports Validation package Certificate for use in manufacturing Required protocols and procedures for dry production Required protocols and procedures for liquid and semisolid products... 

Richardson GA (1972). Development of a Package Decontamination System. EACR-1310-17, Final Report, Contract DAA15-71-C. Dayton, OH, USA Monsanto Research Corporation. 

All reagents and buffers enclosed -no leaking before use No leaking before test is run according to temperatures and humidity specifications on packaging 1. Report - preliminary shipping study + accelerated stability 2. Approved final report for leak test of all vials in kit... 

Altmann, M., Schmidt, P., Mourato, S. O Garra, T. 2003 Analysis and Comparison of Existing Studies, AcceptH2 Public Acceptance of Hydrogen Transport Technologies, Work Package 3, Final Report. Available online at http //www.accepth2.com... 

The final report on this analysis has been submitted and is part of an overall lEA package including all three project reports and a cost model... 

Manufacturing Technology For VLSIC Packaging, Hughes Aircraft Final Report, Navy Contract N66001-88-C-0181 (Jun. 28, 1993)... 

Perkins, K. L., and Licari, J. J., Development of Low-Cost, High-Reliability Sealing Techniques for Hybrid Microcircuit Packages, Final Report, NASA, NAS-831992 (Aug. 1977)... 

Integrated Waste Management Board. Performance evaluation of environmentally degradable plastic packaging and disposable food service ware—Final report. Integrated Waste Management BoardSacramento2007. Downloaded from http //www.calrecycle.ca.gov/ Publications/Documents/Plastics/43208001.pdf. Accessed Oct 8, 2014. 

Finally, the packages should produce complete and easily readable report files containing the results, model prediction vs. experimental data, and all the statistically relevant information. 

M. Hope-Simpson in Composting of Waxed Corrugated and Post-household Boxboard Container Waste, Final Report of the Ecological Agriculture Project of the Paper Paperboard Packaging Environmental Council,... 

California State University Chico Research Foimdation, Performance Evaluation of Environmentally Degradable Plastic Packaging and Disposable Food Service Ware - Final Report, The California Integrated Waste Management Board, CA, USA, 2007, p.40. 

A final report must be written for all studies, even if a stucfy is terminated or discontinued for some reason. Reports for terminated studies need be nothing more than a memorandum to the file describing what happened with all raw data generated attached to it. The protocol should be amended to terminate it. These data packages must be archived for a period of at least two years. 

Word processing, spreadsheet, and graphics software can help an author produce a better final report, but each software package has limitations. It is the author s responsibility to understand these limitations and to overcome them Some of these software problems are the results of programming errors, some arise from misunderstandings by the software developers of the rules of writing, and some represent differences between technical writing and other forms of written communication. 

Final report on AiF project 15839 N Simulationsunterstutzte Auslegung von Kontaktelementen zur SMT-kompatiblen Montage von 3D-MID Packages auf Leiterplatte - MID auf Leiterplatte, 2011. 

Final report on BMBF collective project Mess- und Pruftechnik fiir iaserbasierte Fertigung von multifunktionalen 3D-Packages, 2007. 

---