Fibrous during

The macroscopic orientation of their extended-chain crystals depends on the orientation imparted by flow during mol ding. Because of the fibrous nature of the extended-chain crystals, these materials behave as self-reinforcing composites, with excellent mechanical properties. 

Historically, strontium metal was produced only in very small quantities. Rapid growth of metal production occurred during the late 1980s, however, owing to use as a eutectic modifier in aluminum—silicon casting alloys. The addition of strontium changes the microstmcture of the alloy so that the siUcon is present as a fibrous stmcture, rather than as hard acicular particles. This results in improved ductility and strength in cast aluminum automotive parts such as wheels, intake manifolds, and cylinder heads. 

Solution Process. With the exception of fibrous triacetate, practically all cellulose acetate is manufactured by a solution process using sulfuric acid catalyst with acetic anhydride in an acetic acid solvent. An excellent description of this process is given (85). In the process (Fig. 8), cellulose (ca 400 kg) is treated with ca 1200 kg acetic anhydride in 1600 kg acetic acid solvent and 28—40 kg sulfuric acid (7—10% based on cellulose) as catalyst. During the exothermic reaction, the temperature is controlled at 40—45°C to minimize cellulose degradation. After the reaction solution becomes clear and fiber-free and the desired viscosity has been achieved, sufficient aqueous acetic acid (60—70% acid) is added to destroy the excess anhydride and provide 10—15% free water for hydrolysis. At this point, the sulfuric acid catalyst may be partially neutralized with calcium, magnesium, or sodium salts for better control of product molecular weight. 

The fundamental goal in the production and appHcation of composite materials is to achieve a performance from the composite that is not available from the separate constituents or from other materials. The concept of improved performance is broad and includes increased strength or reinforcement of one material by the addition of another material. This is the well-known purpose in the alloying of metals and in the incorporation of chopped straw into clay for bricks by the ancient Egyptians and plant fibers into pottery by the Incas and Mayans. These ancient productions of composite materials consisted of reinforcing britde materials with fibrous substances. In both cases the mechanics of the reinforcement was such as to reduce and control the production of cracks in the brittle material during fabrication or drying (2). 

Mechanical interlocking of particles may occur during the agitation or compression of, for example, fibrous particles, but it is probably only a minor contributor to agglomerate strength in most cases. 

Chemical Reactivity - Reactivity with Water No reaction Reactivity with Common Materials Attacks rubber and most fibrous materials. May cause ignition of organic materials such as wood. Some acids, such as sulfuric acid, may result in explosion Stability During Transport Stable Neutralizing Agents for Acids and Caustics Not pertinent Polymerization Not pertinent Inhibitor of Polymerization Not pertinent. 

Reinforced plastics (RPs) hold a special place in the design and manufacturing industry because they are unique materials (Figs. 6-11 and 6-12). During the 1940s, RPs (or low-pressure laminates, as they were then commonly known) was easy to identify. The basic definition then, as now, is simply that of a plastic reinforced with either a fibrous or nonfibrous material. TSs such as polyester (Table 6-19) and E-glass fiber dominated and still dominates the field. Also used are epoxies. 

The reduction of blood loss during or after surgical procedures where suturing or hgature is either impractical or impossible can often be accomphshed by the use of sterile, absorbable haemostats. These consist of a soft pad of sohd material packed around and over the wound which can be left in situ, being absorbed by body tissues over a period of time, usually up to 6 weeks. The principal mechanism of action of these is the ability to encourage platelet fiacture because of their fibrous or rough surfaces, and to act as a... 

---