Fabricating processes applications

J. H. Jean and T. A. Ring, in R. W. Davidge, ed.. Novel Ceramic Fabrication Processes and Applications, Institute of Ceramics, Stoke-on-Trent, U.K, 1986, pp. 11-33. 

Applications. Epoxy resias constitute over 90% of the matrix resia material used ia advanced composites. In addition, epoxy resias are used ia all the various fabrication processes that convert resias and reinforcements iato composite articles. Liquid resias ia combiaation, mainly, with amines and anhydride are used for filament winding, resia transfer mol ding, and pultmsion. Parts for aircraft, rocket cases, pipes, rods, tennis rackets, ski poles, golf club shafts, and fishing poles are made by one of these processes with an epoxy resia system. 

Of the various amino-resins that have been prepared, the urea-formaldehyde (U-F) resins are by far the most important commercially. Like the phenolic resins, they are, in the finished product, cross-linked (thermoset) insoluble, infusible materials. For application, a low molecular weight product or resin is first produced and this is then cross-linked only at the end of the fabrication process. 

Ting J-M., and Lake, M.L. Processing, fabrication, and applications of advanced composites, Ed., ASM International, Materials Park, OH, 1993, pp 117 127. 

Composite materials are not claimed to be a cure-all for every application or even necessarily competitive with other materials. However, there are many instances in which composite materials are uniquely well-suited because of their peculiar fabrication processes. Thus, this special case of a doubly tapered wing spar is not really special, but is actually a powerful example of the class of applications where composite materials offer significant advantages over conventional materials. 

Since the end of the 1970s, the polyimides have been introduced for the production of electronic components mainly for the passivation. But more and more they are interesting for the integrated circuits and multichip modulus fabrications. Processability and dielectric and thermomechanical properties are the most attractive features of these materials for the electronic31 and electro-optical applications.32... 

Chemical vapor deposition (CVD) has grown very rapidly in the last twenty years and applications of this fabrication process are now key elements in many industrial products, such as semiconductors, optoelectronics, optics, cutting tools, refractory fibers, filters and many others. CVD is no longer a laboratory curiosity but a maj or technology on par with other maj or technological disciplines such as electrodeposition, powder metallurgy, or conventional ceramic processing. 

Based on the micro-electronics fabrication process, Micro-Opto-Electro-Mechanical Systems (MOEMS) have not yet been used in astronomical instrumentation, but this technology will provide the key to small, low-cost, light, and scientifically efficient instruments, and allow impressive breakthroughs in tomorrow s observational astronomy. Two major applications of MOEMS are foreseen ... 

In this study, we developed microchannel PrOx reactor to control CO outlet concentrations less than 10 ppm from methanol steam reformer for PEMFC applications. The reactor was developed based on our previous studies on methanol steam reformer [5] and the basic technologies on microchaimel reactor including design of microchaimel plate, fabrication process and catalyst coating method were applied to the present PrOx reactor. The fabricated PrOx reactor was tested and evaluated on its CO removal performance. 

Fabrication processing of these materials is highly complex, particularly for materials created to have interfaces in morphology or a microstructure [4—5], for example in co-fired multi-layer ceramics. In addition, there is both a scientific and a practical interest in studying the influence of a particular pore microstructure on the motional behavior of fluids imbibed into these materials [6-9]. This is due to the fact that the actual use of functionalized ceramics in industrial and biomedical applications often involves the movement of one or more fluids through the material. Research in this area is therefore bi-directional one must characterize both how the spatial microstructure (e.g., pore size, surface chemistry, surface area, connectivity) of the material evolves during processing, and how this microstructure affects the motional properties (e.g., molecular diffusion, adsorption coefficients, thermodynamic constants) of fluids contained within it. 

In order to make useful products from polymers we typically follow a three-step process in which we sequentially melt, shape, and cool the polymer. Naturally, given the wide variety of polymers available and their myriad applications, variations on this general process abound. In this chapter, we will concentrate on extrusion, some variant of which is used in the majority of commercial fabrication processes. 

A variety of optical oxygen sensor systems have been developed for applications such as biomedical, environmental and process control . But very few of them have been critically assessed for their suitability for food packaging applications. It has been proven that substantial development, optimization and redesign of the oxygen-sensitive materials and fabrication processes are required for the oxygen sensors to match practical requirements for these applications5. In particular, specific requirements of food applications are ... 

---