Extraction anion-exchanging extractants

Basic Extractants. Only long-chain quaternary ammonium salts, R3NCH3 X , ia which R represents Cg—0 2 groups and X nitrate or thiocyanate, are effectively used for REE separations (see Quaternary ammonium compounds). The extractant reacts with REE according to an anion-exchange reaction ... 

Research has shown that ascorbic acid can be produced from hulls of immature walnuts by extracting the hull with 0.2% sulfur dioxide solutions, and purifyiag the extract by adsorption on and elution from anion-exchange resias (see Ion exchange). Eluates from the anion-exchange step are concentrated, purified by organic solvent fractionations, decolorized, and crystallized (35). 

Stannous Sulfate. Stannous sulfate (tin(Il) sulfate), mol wt 214.75, SnSO, is a white crystalline powder which decomposes above 360°C. Because of internal redox reactions and a residue of acid moisture, the commercial product tends to discolor and degrade at ca 60°C. It is soluble in concentrated sulfuric acid and in water (330 g/L at 25°C). The solubihty in sulfuric acid solutions decreases as the concentration of free sulfuric acid increases. Stannous sulfate can be prepared from the reaction of excess sulfuric acid (specific gravity 1.53) and granulated tin for several days at 100°C until the reaction has ceased. Stannous sulfate is extracted with water and the aqueous solution evaporates in vacuo. Methanol is used to remove excess acid. It is also prepared by reaction of stannous oxide and sulfuric acid and by the direct electrolysis of high grade tin metal in sulfuric acid solutions of moderate strength in cells with anion-exchange membranes (36). 

The anion-exchanger concentration is shown not to influence strongly the exchange constants. It indicates that there is no either the extractant or compound formed in the organic phase self-association. 

ANION-EXCHANGE EXTRACTION OF ZINC THIOCYANATE COMPLEXES BY NON-SYMMETRIC QUATERNARY AMMONIUM SALTS... 

In this work, the results of study of zinc thiocyanate complexes anion-exchange extraction by non-symmetric QASes in toluene ai e discussed. The non-symmetric QASes have the common formula [(C,3H g03)N(CH3) (C,H Q3 J-X-, where C,3H3 03 - highly lipophilic substituent, (2, 3, 4-tn. s-dodecyloxy)benzyl. It was found that exchange... 

Amberlite IRA-904 Anion exchange resin (Rohm and Haas) [9050-98-0]. Washed with IM HCl, CH3OH (1 10) and then rinsed with distilled water until the washings were neutral to litmus paper. Finally extracted successively for 24h in a Soxhlet apparatus with MeOH, benzene and cyclohexane [Shue and Yan Anal Chem 53 2081 1981]. Strongly basic resin also used for base catalysis [Fieser Fieser Reagents for Org Synth 1511, Wiley 1967]. 

Lipoteichoic acids (from gram-positive bacteria) [56411-57-5J. Extracted by hot phenol/water from disrupted cells. Nucleic acids that were also extracted were removed by treatment with nucleases. Nucleic resistant acids, proteins, polysaccharides and teichoic acids were separated from lipoteichoic acids by anion-exchange chromatography on DEAE-Sephacel or by hydrophobic interaction on octyl-Sepharose [Fischer et al. Ear J Biochem 133 523 1983]. 

The separation of basic precipitates of hydrous Th02 from the lanthanides in monazite sands has been outlined in Fig. 30.1 (p. 1230). These precipitates may then be dissolved in nitric acid and the thorium extracted into tributyl phosphate, (Bu"0)3PO, diluted with kerosene. In the case of Canadian production, the uranium ores are leached with sulfuric acid and the anionic sulfato complex of U preferentially absorbed onto an anion exchange resin. The Th is separated from Fe, A1 and other metals in the liquor by solvent extraction. 

Early examples of enantioselective extractions are the resolution of a-aminoalco-hol salts, such as norephedrine, with lipophilic anions (hexafluorophosphate ion) [184-186] by partition between aqueous and lipophilic phases containing esters of tartaric acid [184-188]. Alkyl derivatives of proline and hydroxyproline with cupric ions showed chiral discrimination abilities for the resolution of neutral amino acid enantiomers in n-butanol/water systems [121, 178, 189-192]. On the other hand, chiral crown ethers are classical selectors utilized for enantioseparations, due to their interesting recognition abilities [171, 178]. However, the large number of steps often required for their synthesis [182] and, consequently, their cost as well as their limited loadability makes them not very suitable for preparative purposes. Examples of ligand-exchange [193] or anion-exchange selectors [183] able to discriminate amino acid derivatives have also been described. 

Dried shrimp was ground, defatted with benzene, and then extracted with cold water. The luciferase extracted was purified first by a batch adsorption onto DEAE cellulose (elution with 0.4 M NaCl), followed by gel filtration on a column of Sephadex G-150, anion-exchange chromatography on a column of DEAE-cellulose (gradient elution 0.05-0.5 M NaCl), and gel filtration on a column of Ultrogel AcA 34. The specific activity of the purified luciferase was 1.7 x 1015 photons s 1 mg-1, and the yield in terms of luciferase activity was about 28%. 

The small jellyfish Phialidium gregarium (diameter 15-20 mm) used to be abundant at Friday Harbor, Washington, in summer and autumn until about 1990. Levine and Ward (1982) isolated and purified a Ca2+-sensitive photoprotein from this jellyfish and named it phialidin. They extracted the photoprotein from whole specimens with an EDTA-containing buffer. The photoprotein extract was precipitated with ammonium sulfate, and purified by the following methods gel-filtration (BioGel P-150, minus 400 mesh), anion-exchange chromatography (DEAE Bio-Gel A), and gel-filtration (Sephadex G-75, superfine). 

Figure 3 shows a flowsheet for plutonium processing at Rocky Flats. Impure plutonium metal is sent through a molten salt extraction (MSE) process to remove americium. The purified plutonium metal is sent to the foundry. Plutonium metal that does not meet foundry requirements is processed further, either through an aqueous or electrorefining process. The waste chloride salt from MSE is dissolved then the actinides are precipitated with carbonate and redissolved in 7f1 HN03 and finally, the plutonium is recovered by an anion exchange process. 

Molten salt extraction residues are processed to recover plutonium by an aqueous precipitation process. The residues are dissolved in dilute HC1, the actinides are precipitated with potassium carbonate, and the precipitate redissolved in nitric acid (7M) to convert from a chloride to a nitrate system. The plutonium is then recovered from the 7M HNO3 by anion exchange and the effluent sent to waste or americium recovery. We are studying actinide (III) carbonate chemistry and looking at new... 

Lores EM, Bradway DE. 1977. Extraction and recovery of organophosphorus metabolites from urine using an anion exchange resin. J Agric Food Chem 25 75-79. 

---