Europe refined production

Brazil continues to be a regular importer of lead scrap from the EEC and USA, although the volume traded has declined recently, due to falling domestic refined production. A number of South and South East Asian countries are also important international buyers of lead scrap and this trade, conversely, has expanded greatly over the last few years. Major importers include South Korea, Taiwan, Thailand, Indonesia and India. The main suppliers are Australia, Japan, Europe and the USA, but there is also a relatively small volume of intra-Asian trade. 

The stocks used for jet fuel production come almost essentially from direct distillation of crude oil. They correspond to the fraction distilled between 145 and 240°C, more or less expanded or contracted according to the circumstances. The yield of such a cut depends largely on the nature of the crude but is always larger than the demand for jet fuel which reaches about 6% of the petroleum market in Europe. For the refiner, the tightest specifications are ... 

Refinery Production. Refinery propylene is formed as a by-product of fluid catalytic cracking of gas oils and, to a far lesser extent, of thermal processes, eg, coking. The total amount of propylene produced depends on the mix of these processes and the specific refinery product slate. For example, in the United States, refiners have maximized gasoline production. This results in a higher level of propylene production than in Europe, where proportionally more heating oil is produced. 

Another method iavolves an electric-arc vaporizer which is >2000° C before burning (25,32). One of the features of the process is a rapid quench of the hot gas flow to yield very fine oxide particles (<0.15 nm). This product is quite reactive and imparts accelerated cure rates to mbber. Internally fired rotary kilns are used extensively ia Canada and Europe and, to a limited extent, ia the United States (24). The burning occurs ia the kiln and the heat is sufficient to melt and vaporize the ziac. Because of the lower temperatures, the particles are coarser than those produced ia the other processes. In a fourth process, ziac metal which is purified ia a vertical refining column is burned. In essence, the purification is a distillation and impure ziac can be used to make extremely pure oxide. Also, a wide range of particle sizes is possible (33). 

The United States is largely self-sufficient with respect to copper, meeting any shortfall by imports. AustraHa and the CIS consume most of their production on the domestic market. Japan and Western Europe import substantial quantities of copper in the form of concentrates, bHster, and refined copper. World mine, smelter, and refining capacities in 1989 are given in Table 6. Copper industries in Chile, Pern, Zaire, and Zambia are nationalized. 

For the noble metals used in oxidation, the loading is about 0.1 oz per car, with calls for a million ounces per year. The current world production rates of platinum, palladium, and rhodium are 1.9, 1.6, and 0.076 million ounces respectively the current U,S. demand for platinum, palladium, rhodium, and ruthenium are 0.52, 0.72, 0.045, and 0.017 million ounces respectively (72, 73). The supply problem would double if NO reduction requires an equal amount of noble metal. Pollution conscious Japan has adopted a set of automobile emission rules that are the same as the U.S., and Western Europe may follow this creates a demand for new car catalysts approaching the U.S. total. The bulk of world production and potential new mines are in the Soviet Union and South Africa. The importation of these metals, assuming the current price of platinum at 155/oz and palladium at 78/oz, would pose a balance of payment problem. The recovery of platinum contained in spent catalysts delivered to the door of precious metal refiners should be above 95% the value of platinum in spent catalysts is greater than the value of lead in old batteries, and should provide a sufficient incentive for scavengers. 

---