Phase transfer catalysis esters

The reaction between acyl halides and alcohols or phenols is the best general method for the preparation of carboxylic esters. It is believed to proceed by a 8 2 mechanism. As with 10-8, the mechanism can be S l or tetrahedral. Pyridine catalyzes the reaction by the nucleophilic catalysis route (see 10-9). The reaction is of wide scope, and many functional groups do not interfere. A base is frequently added to combine with the HX formed. When aqueous alkali is used, this is called the Schotten-Baumann procedure, but pyridine is also frequently used. Both R and R may be primary, secondary, or tertiary alkyl or aryl. Enolic esters can also be prepared by this method, though C-acylation competes in these cases. In difficult cases, especially with hindered acids or tertiary R, the alkoxide can be used instead of the alcohol. Activated alumina has also been used as a catalyst, for tertiary R. Thallium salts of phenols give very high yields of phenolic esters. Phase-transfer catalysis has been used for hindered phenols. Zinc has been used to couple... 

The benzoic acid derivative 457 is formed by the carbonylation of iodoben-zene in aqueous DMF (1 1) without using a phosphine ligand at room temperature and 1 atm[311]. As optimum conditions for the technical synthesis of the anthranilic acid derivative 458, it has been found that A-acetyl protection, which has a chelating effect, is important[312]. Phase-transfer catalysis is combined with the Pd-catalyzed carbonylation of halides[3l3]. Carbonylation of 1,1-dibromoalkenes in the presence of a phase-transfer catalyst gives the gem-inal dicarboxylic acid 459. Use of a polar solvent is important[314]. Interestingly, addition of trimethylsilyl chloride (2 equiv.) increased yield of the lactone 460 remarkabiy[3l5]. Formate esters as a CO source and NaOR are used for the carbonylation of aryl iodides under a nitrogen atmosphere without using CO[316]. Chlorobenzene coordinated by Cr(CO)j is carbonylated with ethyl formate[3l7]. 

Contents Introduction and Principles. - The Reaction of Dichlorocarbene With Olefins. - Reactions of Dichlorocarbene With Non-Olefinic Substrates. -Dibromocarbene and Other Carbenes. - Synthesis of Ethers. - Synthesis of Esters. - Reactions of Cyanide Ion. - Reactions of Superoxide Ions. - Reactions of Other Nucleophiles. - Alkylation Reactions. - Oxidation Reactions. - Reduction Techniques. - Preparation and Reactions of Sulfur Containing Substrates. -Ylids. - Altered Reactivity. - Addendum Recent Developments in Phase Transfer Catalysis. 

Under the phase-transfer catalysis conditions, 2-bromo-8-methylquino-line (67) was coupled with 2-pyridylboronic ester 68 to furnish 2-(2-pyridyl)-8-methylquinoline (69) in 56% yield (91JOC6787). At this point, it is opportune to mention that the simple 2-pyridylborane, in contrast to 3- and (4-pyridyl)boranes, is considered an unsuitable Suzuki coupling partner because it forms an unusually stable cyclic dimer resembling a dihydroanthracene. In this case, the obstacle was circumvented by using 2-pyridylboronic ester in place of 2-pyridylborane (Scheme 9). 

Transesterification has been carried out with phase-transfer catalysis, without an added solvent. In another procedure, RCOOR are converted to RCOOR" by treatment of the ester and an alcohol R OH with n-BuLi, which converts the R"OH to R"OLi. ... 

Although the use of phase-transfer catalysis (PTC) for manufacturing esters has the merits of a mild reaction condition and a relatively low cost [1], PTC has its limitations, such as the low reactivity of carboxylic ion by liquid-liquid PTC [2], a slow reaction rate by solid-liquid PTC, and the difflculty of reusing the catalyst by both techniques. 

Tosylate is displaced by weak oxyanions with little elimination in aprotic solvents, providing alternative routes to polymer-bound esters and aryl ethers. Alkoxides, unfortunately, give significant functional yields of (vinyl)polystyrene under the same conditions. Phosphines and sulfides can also be prepared from the appropriate anions (57), the latter lipophilic enough for phase-transfer catalysis free from poisonning by released tosylate. 

Partitioning of carbocations between addition of nucleophiles and deprotonation, 35, 67 Perchloro-organic chemistry structure, spectroscopy and reaction pathways, 25, 267 Permutational isomerization of pentavalent phosphorus compounds, 9, 25 Phase-transfer catalysis by quaternary ammonium salts, 15, 267 Phosphate esters, mechanism and catalysis of nucleophilic substitution in, 25, 99 Phosphorus compounds, pentavalent, turnstile rearrangement and pseudoration in permutational isomerization, 9, 25... 

R Lygo, J. Crosby, J. A. Peterson, Enantioselective Synthesis of Bis-a-Amino Add Esters via Asymmetric Phase-Transfer Catalysis , Tetrahedron Lett. 1999, 40, 1385-1388. 

Sulphonic esters have been obtained from the sulphonyl chlorides in high yields under mild conditions for a range of alcohols and phenols [e.g. 18, 19]. Of particular value is the protection of glycosides possessing a free hydroxyl group and hydroxy-steroids, which are tosylated readily under phase-transfer conditions [20-22]. Alkyl sulphinites have been obtained in a similar manner [23]. Alternatively, preformed tetra-rt-butylammonium sulphonates or their alkali metal salts have also been alkylated with haloalkanes or alkyl fluorosulphonates [24,25]. In contrast with more classical procedures, tosylation of alcohols, which are susceptible to E/Z-isomerism, e.g. Z-alk-2-en-l-ols, occurs with retention of their stereochemistry under phase-transfer catalysis [26]. 

Phenacyl esters, easily prepared from carboxylic salts and phenacyl bromide nnder phase transfer catalysis, regenerate the original carboxylic acid by treatment with sodinm hydrogen telluride in DMF. ... 

Sodium salts of carboxylic acids, including hindered acids such as mesitoic, rapidly react with primary and secondary bromides and iodides at room temperature in dipolar aprotic solvents, especially HMPA, to give high yields of carboxylic esters.679 The mechanism is Sn2. Another method uses phase transfer catalysis.680 With this method good yields of esters have been obtained from primary, secondary, benzylic, allylic, and phenacyl halides.681 In another procedure, which is applicable to long-chain primary halides, the dry carboxylate salt and the halide, impregnated on alumina as a solid support, are subjected to irradiation by microwaves in a commercial microwave oven.682 In still another method, carboxylic acids... 

Thioethers (sulfides) can be prepared by treatment of alkyl halides with salts of thiols (thiolate ions).7S2 R may be alkyl or aryl. As in 0-35, RX cannot be a tertiary halide, and sulfuric and sulfonic esters can be used instead of halides. As in the Williamson reaction (0-12), yields are improved by phase-transfer catalysis.753 Instead of RS ions, thiols themselves can be used, if the reaction is run in benzene in the presence of DBU (p. 1023).754 Neopentyl bromide was converted to Me3CCH2SPh in good yield by treatment with PhS in liquid NH3 at -33°C under the influence of light.755 This probably takes place by an SrnI mechanism (see p. 648). Vinylic sulfides can be prepared by treating vinylic bromides with PhS in the presence of a nickel complex,756 and with R3SnPh in the presence of Pd(PPh3)4.757 R can be tertiary if an alcohol is the substrate, e.g,758... 

---